Another week has flown by! The girls are doing great, cruise control this week as I have just been monitoring RH and temps. Trying to keep them as low as possible, I’ve been getting as low as 74 during the day and 68 at night. I finally took a look a look at the trichomes with my jewellers loop, lots of cloudy, and a few amber around the leaves and top colas, but still lot’s of clear trichomes. I’ve ordered myself a wireless/usb digital microscope to assist with the process, and looks like it will be here just in time to determine harvest day. 😎🎄 I started by eliminating the nutrients at the beginning of the week. I typically allow for 3-4 pure water feeds before I harvest, and at the rate they have been drinking, this should be enough to get through the 7-12 days they have before harvest. I don’t flush, but rather “rinse” with normal water amounts, allowing the plant to use up the remaining nutrients in the soil. This also allows me to recover most of the soil from my grows and reuse ♻️ with other soil mix. There has been great debate and a great deal of bro science out there for many years, but the recent studies suggest there is no difference in end result when it comes to flushing or using nutrients right until the end, if a proper dry and cure is performed. What do you think? What do you prefer to do? Thanks for reading this far, leave me a comment with your preferred method 👊🇨🇦❤️

Hey everyone 😃. Today is the penultimate week before the harvest . It has continued to develop beautifully and is getting bigger and bigger 😃. She only gets Ec adapted water so that she can use up her last reserves of nutrients. I wish you a lot of fun Update, stay healthy and let it grow 👍 Strain : Sour Diesel ☝️🏼😍 Genetic: Diesel x Northern Lights 👍 Vega Lights : 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lights : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Soil : Canna Terra Professional + ☝️ Nutrients : Canna Terra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

So I'm doing a little experiment with the clones: took the 2 lowest viable branch pairs and put 1 of each pair into a Jiffy pellet and a rockwool cube. All preloaded with Roots Excelurator and SuperVit at 5.5pH and added some mycorrhizae to boot. Only had 2 days to prespray the branches with Clonex Mist and have been spraying the clones every other day with it. It's been a week with no roots showing yet but the clones have looked healthy throughout and never showed signs of wilting (which I remember happening for a short period the last time I cloned). I expect roots to show in the next day or 2 but who knows. And now for our main story: LSSH1 is showing white bud tips! This is most likely due to the ridiculously close proximity to the light. Not sure what to make of it yet but I guess we'll see if it has any effect on quality 😏 The buds have expanded a very tiny amount and I expect much more this coming week but from my understanding this strain does not produce really dense nugs to begin with. From the results so far I would say the plants have liked the switch to Canna nutes although I would recommend going with the light feeding schedule at least to start with. PK1 still with very tiny buds but it's getting more light now. PK2 seems to be growing faster now on Canna nutes. BTW: on the rare occasion I get my hands on some trichs, my fingers have an unmistakable lemon candy smell 😍

.

DAY 6 WEEK 2 - FLOWER Hello fellow growers, I'm thrilled to report that my current grow is progressing smoothly as I enter Week 2 Day 6. The plant is showing promising signs of healthy growth with no apparent deficiencies detected thus far. However, I've encountered some peculiar symptoms with the leaves; it seems like there's some tissue tearing or ripping occurring. Despite thorough inspections, I'm confident in stating that pests are not the culprit, as I haven't observed any other signs they typically leave behind. It's a bit perplexing, but I'm keeping a close eye on it. One aspect I've been experimenting with in this grow is the use of an ExHale CO2 bag. While I had hoped for a noticeable increase in CO2 levels, I haven't seen a significant improvement. After careful consideration, I suspect that the lack of a sealed environment is hindering its effectiveness. Humidity issues prevent me from sealing the environment completely, which likely results in the CO2 being dispersed rapidly. For now, I've decided to forgo using the CO2 bags, but I'm open to revisiting them in the future if I can establish a sealed environment. Looking ahead to the start of Week 3 of the flowering stage, I plan to introduce PK boost additives to enhance potassium intake. This strategic addition aims to support robust flower development and overall yield. Despite the minor setbacks, I remain absolutely thrilled with the progress of this run. With approximately five more weeks to go, I'm eagerly anticipating the taste and aroma of the final product. I appreciate all the support and encouragement from fellow growers. Here's to continued success and growth! Let's Grow!

Another big jump in height this week; we are starting to lose sunlight here by about three minutes a day now. I heavily defoliated these plants at the end of this week, and took off any “unviables”. I also topdressed with some extra bloom nutes and some new soil to help keep some moisture in. As of the date of this post, we are just coming out of a heat warning, and it’s been 47 days without measurable rain in my area, we are also seeing pollution from forest fires northeast of us in our province. It’s hot; it’s dry, and now, we have this eerie light that I call “the fire sun” Luckily the goils seem to be thriving as best they can in the midst of it all. ☀️ 🔥

Dried for 21 days. No weight bevor drying because i did a dry trim

Update coming.

3/11 Week 11 a day early due to visitors day 28 of Flower Her buds building and coning as any proud female would like. No signs of any deficiencies and the tips are ok so leaving all nuets as is. Halfway to projected harvest date according to Fast Buds, we believe them. Having some humidity issues due to our funky weather. Humidity running higher than is safe on lights out , 60-70%, so installed one small dehumidifier but getting a larger one today to add to it. That is pretty much it, hope for better pics later! Good growing out there! 3/12 Vid and Pics of her We fouled up and miscalculated days in flower today should be 29 as she obviously into flower on 2/12. Hubby just looked at the calendar wrong 😏 Fix what I can sorry folks thought it looked further along than that. pics

Buenas compis Terminando tercera semana de flora Las peques , muestran algo ,debo subir las dosificaciones Para darles algo más de alegría Pero por lo demás ..todo genial

1 plant was very ripe, 1 plant was almost perfect to harvest and the 3rd could take another 1-2 weeks...but it was end of 10th week of flower and i had to go on vacation, so i perhaps choped 1 plant abit too early....still awesome result!

Friends Growth Period about 9 Weeks, Blossoming 10 Weeks, Plant With Great Christmas Tree Structure. As far as nutrition is never said, it's never enough or more, he wants, for the rest any mold problem .... Very sweet aroma requires filter in the cultivating chamber.

Hi Cannafam, its all about the microbes! Brewed a tea for 24hrs, of the soil activator 2.6g, fresh organic kefir 100g, EM1 4ml, aquaponics microbes (fresh semi solid fish waste) 100g. and molasses at a rate of 20g per gal. or 5g per Litre. Once brewed add yucca at a rate of 1ml per gal, then use as a foliar spray and root drench. Just thinking I should have added some worm castings to the mix as well. That's next for next week I guess.

Still just watering about every 2 days only water. 1 day a week im still using fishit. About to move them to a flowering room. I cut about the bottom 20% off. I am gonna scrog and the bottom wont recieve any light