🤩🤩

Hey folks. The first set of uploads for this week was taken on Wednesday. Super heavy defoilation done. Lots of excess growth under the main conopy so I lollipoped them. In total between the 4 plants I estimate about a 1lb worth of leaves! She's a bushy plant so I got to keep her in check. Regular watering of 40mL of molassas to 19L of dechlorinated h2o. Also did a bit of lst with wires, binder slips n the 3d printed clips you see in the photos. Work great and its opening up the canopy wide. I can already count more than 15+ potential main cola sites. Not sure how much for i can make befor flowing which starts mid August for us. I may have to starting thinking about when to apply our second round of top dress. I may start to feed her with higher ratios of the bloom amendments. Also a note. Watering with molasses is a new thing for me and it seems to work wonders with a organic grow since you are feeding the microbiology which in turns feeds the plant roots with co2 and organic ions. Pretty cool to see the plant respond well to the carbs added via watering. Another note to mention is I'm starting to notice some gnats hanging around the topsoil. I do belive the molasses sugars are attracting the critter which is bad! I have been combating them by spraying thr topsoil with neem oil. 1tbs per quart of warm water and 10 drops of non-posphate dish soap to act as a wetting agent. (Helps the neem oil dissolve into the water). I have been applying the solution to the top soil every 3-4 days and have notice a significant decrease in gnats flying around and the plant doesn't seem to mind it at all. I'm just hoping it helps kill the gnat worms if they did lay any eggs into the soil. Hope you guys enjoy this one.

Day 64 😧 WTH no sun...cloudy...cold 😵

All going kind off as planed, appart from the SuperGlue Girl. just did a big 2,5 gallon Flush on her and now waiting for the soil to dry and start over the feedings. clean her good so i'm hopping for the best 😅 lets see how they react and if they cacth up 😍😋 Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D

La prima settimana di fioritura è andata molto bene vediamo come prosegue Giorno 2 la sera viene annaffiata con 2L di acqua Giorno 4 defogliazione per esporre tutte le cime alla luce Giorno 7 verrà annaffiata con 2L di acqua a 700ppm

01 December 2020 Do-Si-Wine This lady is just getting frostier by the week and looks really beautiful, very white frosty thcA and orange hairs coming out. The nugs are getting a lot thicker as-well giving more of smell off which smells very nice btw. Did some more defoliation on this lady and light penetration is a lot more efficient as well Sunset Sherbet Week by week the nugs are just getting thicker and more frosty. Throughout the week I did some nice defoliation on this lady to expose light to the lower bud sites to ensure that the nugs will yield a bit better. Thickest mug so far is 4cm in width and is 6,5cm in height and smells absolutely dank🔥 In general this lady is doing very well and smells very potent to the touch, I’m just waiting to see this strain turn purple as the genetic is. Another 4 - 5 weeks left until harvest.

She has become a beautiful little bush full of fat dense nuggets completely covered in fruity and sweet resin glands with some purple no tones in the buds. Love It!

Yellowsticky traps capture hundreds of thrips. She is just beginning to become a girrrrl.

Bud sites are getting ready now. I did a bit more LST and removed a few side shoots which never gonna make it due to lack of light. I replaced the light, under the TS 1000 she was praying all day long. On the previous run I had problems with the FC3000, it was turning itself off at random times. Mars Hydro was kindly sent me a replacement controller, so far it seems like this problem has been solved. However, I tried to use the app again and it’s still shite. 💩😂 So I just use the light in manual mode. Such a shame for the extra features I cannot use. For DLI I will use the following chart: AUTO FLOWER LED LIGHT INTENSITY Recommended LED PPF/PAR Values / DLI Based on 20 hrs. of light. Seedlings 150 - 200 umol / DLI 10.80 - 14.4 moles per day Veg up to 9" 450 umol / DLI 32.40 moles per day Early bloom 500 umol / DLI 36.00 moles per day Mid bloom 650 umol / DLI 46.80 moles per day Late bloom 750 umol / DLI 54.00 moles per day Ripen 400 umol / DLI 28.80 moles per day *** Use extreme caution going 700 umol or higher @ 20 hrs/day this could cause leaf burn*** The only difference is that I will keep this run in 18/6, so I ignore the PAR values above. IMO the best thing you can do is to read the leaves all the time and use the charts as a guidance.

1st March Mon - So it’s been 3 weeks since I planted her and coming into the 2nd week of veg. I’m happy to say she’s doing well we have now got 2 more leaves so she’s growing well. 2nd March Tue - Updated grow diaries today put out a question on her leaves so will update what I find out. Think I will start giving nutes in a few days but not too sure how to go about that? Will record what I find out, any comments appreciated!!! 3rd March Wed - Nothing new to update today just letting soul dry a little before I add nutes tomorrow. 4th March Thur - First day on nutrients!! Got some fresh ph balanced water at 6.5. Added 4 drops each of Dutch pro soil A+B and 3-4 drops of cal mag. This was added to 2 pints of water gave enough to the plant for it to be damp. Very excited to be moving on with the grow!! 5th March Fri (day 14 since sprout) Very excited to see the plant is responding well to nutrients the leaves are getting much bigger looking forward to see what she has to offer in the 3rd weed of veg. ....disaster struck when I was lowering the light it completely broke off and squashed the plant for no longer than 2 seconds. Only break I can see is on one of the lower leaves but hopefully it’ll bounce back! 6th March Sat - Very very disheartened today! :( but I can only try and see what happens! So I had to take a few hours away after the incident happened because I was ready to go hulksmash on the whole grow tent 😂 but with some advice from a lot of growers on here I’ve got a little motivation to continue! So I’ve tied the plant up with a stick and some thread I’ve very loosely tied it to the stalk so she straightens out. Gave her a little more water with some nutes so hopefully aid her. Will keep everything updated on how she grows with the incident in mind. Any advice at all would be very much appreciated! 7th March Sun - So we’re at the end of “week 2” after the incident I think my girls doing well. I’ve put soil upto her bottom leaves to give her more support as advised!! Gave her some water with nutes hope she picks back up this week. Excited to see how she transforms and grows!! Happy weekend guys!

Día 69, 21 de flor. Foto 1 pre-peluquero Foto 2 y 3 post-peluquero Vídeo #MerryBerry Así va la cosa chavalitris! Se llevan el último arreglo ya en flor, a ver si las engañamos y engordan más de la cuenta Toca riego en todas menos Gorila, que va unos días más lenta, y aún no tiene esa sed. Favoritas de momento: La #MerryBerry 3 huele muy muy diferente. No la he acabado y creo que ya quiero repetirla 😅 Cultivo fácil, estructura, mucha resina. También top la #BlueberryMuffins 1 apuntando buena estructura, producción y resina! La #weddingcake 2 y 3 mejoraron tras la apical y en Stretch juntaron nudo, 2 con con más resina. La #ChocolateMintOg 1 solo es porra principal, pero parece tirar bien de resina. La #Gorilla está por ver, pero también tiene un olor peculiar desde hace semanas.

Ich hab mit der Spülung begonnen. Gespült wird für 1-2 Wochen.

Có vẻ như pheno wedding cake đã vô tình quay trở lại thời gian ăn chay Hay số N dư thừa là flower bị phát triển lá ?

Ho eseguito una leggera defogliazione nella parte bassa attorno al primo e secondo nodo in modo da dare più potenza e priorità alla parte apicale verso la luce, lei è la più alta del box ed è veramente una signora! Grazie a questo super soil di Dogma Organics avrò un risultato estremamente eccezionale! Non vedo l’ora 😜

Simply planted the seeds a half inch below soil and watered them in... they each sprouted within 3-4 days.

Waiting to get dry enough to setup Blumat. 05.07: Setup hanging drip at 150mbar with -2 arrow distances to get dry moisture level. - Video

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)

I have not dealt with such an unpretentious girl for a long time! very easy to grow. I got only udovstye from her!) I really wanted her to become black at the end. but unfortunately it did not work out ((but no matter how it was, I am generally 100% satisfied with the variety