Recommended
Likes
8
Share
@nijuana
Follow
Ready for harvesting Trichomes are ~ 10-15% amber
Likes
35
Share
@SAC87
Follow
Flower day 7ish Hey Growers I did a minor defoliation to remove the beastly fan leaves and the ones in the mud. I also did a bit more LST to even the canopy as much as possible. As it seems, I have no more control haha. One or 2 plants have stretched more than I’d have like but the entire canopy is pretty even. The SF4000 is about 8” off the top of the tent at 78%. They start to droop for end of day about 3 hours before lights out, I was concerned something was wrong as I’ve never really seen drooping that much in healthy plants. Just gonna keep cruising along and hopefully things will be good in the end. I’ll keep my eyes open for any problems. Happy Growing 🌱👍🏻
Likes
12
Share
Flip mode squad in the house! LSD and Green Crack move to the 4x4 room, under the Samsung strip's. Both plants were topped and defoliated. All four ladies look happy and healthy, I can't wait to see how they grow under this light. Thanks for stopping by growfessors 👽🌳💚
Likes
54
Share
@Mr_Pgrow
Follow
Good week, no issues popping up. Just watered when needed. WCC she is packing on weight, with buds stacked on buds and smells amazing. C4 Very strong girl, nothing has fazed her from the beginning. Beautiful purple plant and the smell is floral. And packing some nice looking buds. Gelato Pretty much the same as C4, very strong, looking amazing and the smell is delicious. Bud sites aplenty. SBP Small bud sites are developing with a few white hairs. More just growing her on as a little experiment really she how she turns out. Not expecting much, but we'll see
Processing
Likes
38
Share
@ETgrows
Follow
They seem to be looking great I’d appreciate any feedback on what you guys think
Likes
17
Share
Had some isus with high humidity had no prob till day 33 of flower but sorted out back on track again dehumidifier rescue lol.o yee forgot to say added new light spider farmer sf4000 sick very happy with mars hydro and spider farmer sf4000 top noch lights .any one who is thinkimg to buy led light very very recomend happy growing
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 04/01/2020 - Did the last defoliation, removed about 1/4 of plant material. 06/01/2020 - Fed her 1.5l of 6.5PH water with 0,3ml Cal Mag (Atami) 0,25ml of Grow, 0,6ml of Bloom and 0,5ml Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale).
Likes
10
Share
Smell is unreal, sweet candy shop sorta scente, buds are extremely hard so far like steel 🤞.... the tall scruffy thing in baxk, hasn't had the optimum PAR as you can see also, it was the only one in the gold label special mix (pre fertilised) media...
Likes
4
Share
Haven't got the hand of the nutrient think it takes to long on my phone so I'll take a pic later when I flush out in 1 or 2 weeks hopefully I make the contest
Likes
22
Share
Likes
15
Share
AMAZING WEEK! The environment is reading for flowering. Lighting, feeding, watering, air temp and CO2 are all stable and should give my plants a stress free life. Humidity is still high, so I'll need to come up with a plan for dealing with that ASAP. I've introduced CO2 into the grow with my brand new AirBomz unit. It uses a light sensor that releases CO2 when the lights turn on, and then uses a timer to release every 2hrs until the light switch off. I doubt I'll reach the 1200PPM stated by the manufacturer, mainly because I'm running an extraction, but I figure some is better than none. Cool controller also included. After doing some reading I can see there's two things that I need to look out for: A) Switching off the extraction so it doesn't suck away the precious CO2 before the plants have had a chance to absorb it B) Making sure the room doesn't get too hot whilst the extraction is off, causing heat stress My solution is: A) Switch off extraction for 15mins at the AirBomz 2hr interval B) Use the Temp Controller the switch off the circulation fan when temp exceeds 27C C) Controller then switches on the active intake when temp exceeds 28C D) Temp is held at 29C whilst the extraction is off D) Extraction turns back on after 15 mins, temp drops below 27C E) Temp controller switches off active intake... F) ...And switches on the circulation fan G) Repeats every 2hrs NEXT WEEK: Work out how much the girls are drinking! I'll know when I change the reservoir.
Likes
3
Share
As always germinated in a glass of water with 1/5th peroxide added. Beans all opened up in about 30 hours. Plugs were hydrated a day beforehand so they were nice and moist but not drenched. I added a little myco's to maybe get a headstart on inoculation and explosive and healthy rootgrowth due to the fungus. Took about 48 hours to break topsoil and the Grape & cream beans seem very vigorous. 14-8-2023 Ive added a vid where you can see 3 grape and cream seedlings where 2 seem to be less happy than the third. Heatstressed mostly. This was due to my light hanging too low and the ppfd seemed a bit much for them so ive adjusted and they seem happier and are folding out flat again. 1 didnt seem phased so for now we'll keep an eye out for that one for cutting purposes but its very early hahah
Likes
52
Share
The week starts Monday, Dec-9 in vegetative stage. Started lowering the distance from the light to 45cm (18") over the coming week. The extraction fan on its lowest setting is too strong for the current growth environment so the humidity levels have been rather low (35% -> 50%). An attempt to stop/start the fan with 30min intervals caused both temp and humidity levels to swing wildly. The environment inside the tent is now stable, albeit low temp and humidity levels since the fan has been left to run continuously. Added a large tray of water with an aquarium heater warming it to raise the humidity level inside the grow tent. And added a large hanging wet towel. Both methods helped. The plant is recovering very well and stretching in its growth. The side branches are reaching out to the light. Starting to increase the frequency of fertigation to daily as the plant seems to be sucking up water/nutrients well. Run-off was measured at EC 0.94 and pH 6.2. Topping at 5th node - start of LBH’s Famous ScrOG Tutorial. Cut the stem above the 4th node. The topping should probably have been done a few days ago but I wanted to see the plant recover first.
Likes
285
Share
👉Alrighty Then👈 So we are at DAY 28 of Flowering with the Sugar Larry 👈 And she's doing fantastic 👍shes finally done with her stretching 👌 and building Budz 👈 😀 decided to showcase pheno #2 , definitely has different traits then #1 very interesting 😀 thoe both are killing it 👈 Hedgehogs in full bloom 👈 I did a major strip , defolation is complete 👌 Except for some slight watering , ive been doing some defolation as well as some LST manipulation to pull branches to the side 👌 👉I had to Top her during the middle of 4th week 👍 Happy Growing 👉Soil Provided by ProMix.ca 👉Nutrients Provided by Agrogardens 👉Lighting Provided by MarsHydro.ca Thanks my friends for the great support over the years 🙏 Happy Growing
Likes
44
Share
@Aedaone
Follow
The temperatures, humidity, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil. Day 1 we had sunshine and clear skies until the afternoon. We had clouds roll in and about 4:00 P.M. a severe thunderstorm hit. There was high wind, heavy rain, and grape sized hail. Fortunately the hail lasted only a few minutes. Day 2 we have clear skies and sunshine. The temperature is mid 70's. Day 3 we had rain and thunderstorms through the previous night and into the morning. We had sunshine, clear skies, and temperatures in the upper 70's. That was followed by severe thunderstorms, rain, and a touch of hail from 4p.m. to 6p.m. These were topped and had thr bottom nodes removed. Day 4 we had relief from the rain. Temperatures were in the mid to upper 70's and lots of sunshine. We have a few days of sunshine in the forecast 🙏 Day 5 we had lots of sunshine and clear skies. Highs in the upper 70's and 49% humidity. We needed the dryness. 🙏. Day 6 we had clear skies and sunshine. Temperatures were in the mid to upper 70's. Day 7 we had partly cloudy skies and temps in the middle 70's. This week was a success. The plants doubled in height and thankfully didn't have any serious damage from the hail.
Likes
12
Share
6ª Settimana di Fioritura💐 La LEMON OG 🍋🌊 è molto in forma e continua a gonfiare i suoi fiori innevati😍❄️🏔️😋
Processing
Likes
2
Share
@Ab_87
Follow
1-Starting the week strong, plant is looking good. Not sure if the buds should be bigger or not but according to the strain it’s a 70-80 days flowering time so I still have plenty of time to see those buds fattening up. 2-Added 75W full spectrum LED to increase quality of pictures. In my opinion, totally worth it. Got to see my plant from a different light was amazing. Everything is looking good and the soil is still slightly moist. Probably water tomorrow. Separated all the branches to allow more light to penetrate the middle of the plant. 3-Soil completely dry, water plant with flowering nutrients. The smell seems to be a little stronger today. 4,5,6-No major changes.
Likes
11
Share
@gsimd
Follow
I'm going away for 30 days about a week into this grow. I'm going to automate weeks 1 through 5 by using the Blumat watering system along with the automated fan from AC Infinity. Hopefully, these will keep things going while I'm gone. I've never used the Blumat products before and I'm excited to see their potential. If I succeed, I'll return to happy 5-week old plants. If not, I'll have to start a new grow...which is what I was going to do anyway. I have nothing to lose but a couple of seeds. Let's get this automated grow started. Day 1 - I placed the seeds directly in a fist-sized clump of Coast of Maine Seed Starter soil that was then placed in a 3-gallon pot full of Coast of Maine Stonington Blend. This will ensure the seedling doesn't get exposed to the nutrient-rich soil too soon. I set the light 2 feet above the top of the pots so they have room to grow into the 18" to 12" range. I also set the light strength to 60% during germination. The temperature in the tent remained 75 degrees and humidity was 70%. I also covered the soil over the germinating seeds with mason jars to act as humidity domes. Day 4 - Both pots sprouted this morning. I immediately removed the mason jar humidity domes. I also increased the light to 70% strength and installed the Blumat watering system to help me keep things growing while I'm gone.
Likes
25
Share
09/06/2022 - Day 21 - First day of the 4th week. Great developement in the last 7 days. The plan is to let her grow without any kind of training. Wish me good luck and let's hope in sunny mild days 🤞☀️ - DD