Couple weeks from germination 🌱🎩🌈🍬

3/28/25 chopped and humidity was a little high starting off 3/30/25 have them drying at 60% and 70° 4/3/25 Still needing a day or so of drying to be at a stable humidity Beautiful plant. Fan leaves with Triched out patterns visibly everywhere. Even though i chopped quite a bit off of the plant, i still got quite a bit bigger yield than i expected. All sizable nugs. Pulled 65 grams.

Weeks has been good. its really week 5.5 half way though but wanted to do the update today. The one THCv plant is having some issues flipping back to veg after the mix up. Its really getting weird AF. and I think next week is when I will be flipping them to bloom so IDK how that one is going to react. I have more seeds of that one so if it fails its ok I can grow it again. the CBG's are the strongest in the tent. Added their first feeding of the Acadie fertilizer, low amount. 5ml/1gal its recommended rate is 30ml per 1L seems crazy high but that's what the label suggests. Herbs also doing well, gave them a feeding too and last week I added in some Nematodes as I saw a gnat, but have not seen any other ones since applying. so that's a bonus. Again a bit to much N in the mix, I did not think I added that much but guess I did. Looks ok on all the other nutrients. Also a nice little shoutout to IZI, they sent over a strain to try with some cool stickers and a leaflet of all their strains. I got the Lemonade Kush, This was stuck in the mail for a month or so, I think they sent it out just before the strike in Nov and it arrived in early/mid Jan. https://izi.farm/seeds/lemonade-krush-genetics-fem-izi-2 Other then that nothing much to report.

She stretched a good bit this week will be much better for airflow. The plant structure if one expected from its lineage, stocky and hardy. No smells of pinene just yet but I would expect at some point. Thanks again Beans! Stay safe, 🍻

Hi Dear Friends, 👨‍🌾 👩‍🌾 Plants showed some deficiencies, but we are recovering it. I prefer to have deficiencies instead excesses.. Maybe It was better if I started a week ago to give Top Veg. It is the biggest of the cycle and it is really fast. I notice a HUGE difference compared to other plants growed under the 480w quantum board. The Kush mintz Fast is under the the XS2000 by ViparSpectra and it is bigger and stronger compared to other plants. Small distance between internodes and stems hard like rocks. This lamp is really a beast, can't wait to try the new models!! ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night.... In this diary you will see our journey with Kush Mintz Fast by Original Sensible 🤩, sit down and enjoy the show! We are growing in a 15L Smart Pot with Light Mix soil by BioBizz under the AWESOME XS2000 by Viparspectra 🤩 DATA SHEET: Bubba Kush , Animal Mints, Secret Hybrid Genetics: mostly Indica Yield: 650g/m² indoor flowering time: 50/55 days THC: 25% Aroma: cookie mint Effect: happy relaxed 💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://originalsensible.com/original-sensible-seeds-kush-mintz-fast~21711 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA -FANS: A)OSCILLATING FAN D.15cm 2 speeds 20w B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet) C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability. 💊💉💊FEEDINGS: We used BioBizz light Mix TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

1/19 - RO ONLY 7gal at 6.2/6.3ph and 73* PM fed remaining gal 1/20 - Feeding nutrients, 4gal at 6.1ph and 76* 1/21 - Feeding nutrients, 5gal at 6.1/6.2ph and 76* 1/22 - Feeding nutrients, 4gal at 6.1ph and 76* as well as RO at 6.2ph 1/23 - RO ONLY 4 gal at 6.1ph and 74* 1/24 - RO ONLY 6.2ph 1/25 - Feeding nutrients, 4 gal at 6.1ph and 77*

You walk into the back yard and it’s a straight face punch of smells. Looking like some indoor rn moved all plants to safer place in case storm hits so now I atleast have a wind break

2nd week flushing, watching trichomes with a 60X loupe waiting for a few amber. One plant was chopped last night and hung...patiently waiting for the others😑 Well I decided to take Roberts suggestion and try 2 days of total darkness (thanks) before chopping down the rest. Removed the fan leaves and chopped the ladies down 😇hung them to dry in a dark room with indirect air movement. RH 55% at 20C for 3 days then RH 50% at 18C for a couple of weeks, then mason jars and then lastly 62%Boveda. Will update with dry weight and smoke report😎 Thanks for your comments and suggestions

Almost there 🍀

Twenty20 Ateam R&D Update! Wow this week went so great, Germination was 100%successful!! We went with the usual paper towel method an they all popped up in the soil on Saturday the 28th! Let’s grow lil babies let’s grow!!

Good growth this week after topping and some lst.Still no sign of any pistils which I'm happy about since been flipped from 1 week from germination.Managed to get 8 to 10 tops before flowering.All good and happy grows🤞🍁

This week has been crucial as to keeping her pinned,,and defoliating in turn,,to get as many tops as I can exposed to the awesome TS 1000 from Mars Hydro,,! Really impressive the lumens this light puts out,,compared to other 1000’s I’ve used,,,,! Anyhow,,the light has helped me achieve what I wanted to ,,along with dedication,,💚 Yeah,,pinning and training takes time and knowledge which can be a drag for some,,but it’s another one ,of the best things about this plant,,so versatile and great for a hobby,,with awesome rewards for effort,,!

This was my first cycle in tent. The Autopot System is amazing ang brings autonomy. I used fert Plantprod, calcium nitrate, magnesium sulfate and MKP. PH around 6.0 and solution fert in tank 1200 PPM . This strain is fantastic. It withstood the intense heat of the southern hemisphere's tropical climate. It was easy to prune and defoliate to control the size. The smell is of tangerine and flowers produces a lot of resin. I am very satisfied with this harvest! Thank you Sweet-seeds!!

Day 15 - Gave the girls 500ml of plain RO at 6.3(ish) PH. Watered in a ring around 'em to encourage the roots to spread out. Day 16 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Day 17 - Waterred 'em down again, 500ml plain RO at ~ 5.9 PH. Days 18 &19 - Nothing done, just monitoring the grow environment Temp, RH, Leaf Temp, VPD, etc. Day 20 - Waterred 'em down with around 700ml plain RO at ~ 6.1 PH. Day 21 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Notes: I'm starting an Arduino project that automatically waters the plants based on the soil moisture and will calculate weekly water consumption. I already have one setup that does all of that and has a water level indicator that alerts me when the water level is low. Automatic Watering Kit: https://www.adafruit.com/product/4746 Soil Moisture Kit: https://www.adafruit.com/product/4241

Everything went allright as usual, kept a good splash of water on it at all times. Dont panic if nothing happens first few days, outerlayer needs some time to soak and burst. Cant say if this is the best method, yet it never failed me.

I came back to the fridge after 6 days and stretch was running massively. They grew like 20cm in 6 days I changed my climate to: 27° C 60% rlf in order to adapt to early flower Day and Night same 45% light about 580ppfd Still running the water in a circle. Adjusted the scrog a bit in order to fill the space more They eat like 1100ppm CO2 an hour 😎 __________________ Update: last 2 videos show day 8 of flower ,🤙🏼 Decided to give them a heavy defoliation due to it being a closed loop system and them emitting tons of humidity. So far so nice 🏼

Welcome to my next grow/experiment! Amnesia haze holds a special spot in my heart ever since I experienced it at the Amsterdam cannabis cup in 2012 - really looking forward to this one. I have plans to top once and hopefully be successful at making a clone to reverse. From there I’d like to maybe make some F1, and S1 seeds as well as breed it with the cultivar sharing the tent: Mephisto’s White Wedding. Started off germinating on Saturday 2/3 by soaking the seeds in a cup of water for 24 hours before transferring to a wet paper towel. On Tuesday 2/6 tap roots were present and they were moved to rapid rooter plugs and put into a humidity dome. On 2/11 they had sprouted up 3” and were transferred to the top fed RDWC system. Filled the reservoir following General Hydroponics 10 part chart at light strength and diluted by 50%. SE7000 is ~30” above at 40% providing ~270ppfd.