Likes
Comments
Share
Techniques acquired!! Guys... we really need some rain. The area were in is experiencing record high temperatures and its getting hotter and hotter everyday. :( Nevertheless the girls have prevailed and come out strong! A moment of silence please for ben, she will be missed..... Now it's time for techniques. The LST is the main technique we are trying to go for and it seems to be working well for them. The HST was not intentional lol I just accidentally bent Osaka's stem and she started to flourish so I tried it on Prince and it seems to be working very well. Don't you just love how resilient plants are?? Were still keeping the watering to the same and the nutrient level did go up a little but only for the ones that are still standing...
Likes
24
Share
Added yellow sticky fly traps to all cubes as a preventative measure to avoid infestation of fungus gnats. So far none have been spotted. Defoliated and did a little more LST to all the plants to open up the center and give more light to lower shoots. Blue Dream 3 and Chemdawg 3 started showing some discoloration on the leaves (yellowing around the veins) and also the leaf tips curling down. Did some research and came up with this... Possible diagnosis: - Yellowing around leaf veins could be a sign of Magnesium or Iron deficiency - Leaf tip curling down could be a sign of Nitrogen Toxicity. - Both could be caused by improper ph balance in water Possible solutions: - Applied Botanicare CalMag+ as a foliar feed and added some to the reservoir. CalMag+ contains Calcium, Magnesium and Iron. - Diluted nutrients in reservoir to lower amount of nitrogen being fed to plants. Was feeding them at 1300ppm, lowered it to 1050ppm - Tested runoff and saw it was coming out at 5.4pH so I increased the pH in the reservoir to 6.0. Now the runnoff is testing at 5.7pH, meaning that my rootzone is in the optimal range of 5.5-5.8 Well wait and see how the plants react to these slight tweaks. Hopefully we start to see a nice healthy even green again.
Likes
3
Share
The buds are swelling little by little, now we just have to wait, it hasn't given me any problems as a plant, indeed I recommend everyone to grow it as simple as it is .. I'll update you next week that should start to swell a lot.
Likes
2
Share
Estamos en la primera semana de vegetativo, ya que a la anterior se la conoce como semana de germinación. Las plantas empiezan a mostrar las primeras hojas reales por encima de los cotiledones. Cuidado con que la humedad relativa del aire, no sea demasiado baja, lo ideal sería alrededor de un 65%. En esta etapa solo regamos suavemente con agua cada 5 días aprox. * Una de las plantas no ha crecido correctamente y la doy de baja.
Likes
11
Share
Going good so far. I am shocked how little water I have had to feed them honestly. My preperation has paid off very well. 6/13/2024 Day 22 Temp: 82 F RH: 70% VPD: 1.17kPa I went ahead and chopped the middle plant. Mycelium is appearing below and that’s rad! I lowered the plant off the crate I had it on and went ahead and raised the light power to 10/10 because my PAR was good. All plants are showing pistils now. Bloom/Flower has begun. Light distance 18 inches now light power 10/10 50kLux 6/14/2024 Day 23 Temp: 87 RH: 65% VPD: 1.48kPa Plant #1 11 inches Plant #3 8 inches Light to plant 12 and 14 inches KLux at 10/10 65 & 45 Water good, mycelium growing all over. By the time I get back on Sunday the water should be gone, the plants will be huge and I’ll have to hurry to move the light lol. I don’t like how hot it’s staying but I’m afraid to turn it off because how cold it gets at night. 6/18/2024 Day 27 Temp: 75.6 F RH: 58% VPD: 1.25kPa Plant #1 height: 18 inches! Plant #3 height: 12.5 inches 6/19/2024 Day 28 Temp: 85 F RH: 77% VPD: 0.92kPa Plant #1 Height: 19” in Plant #2 Height: 14” in 6/20/2024 Day 29 Temp: 84 F RH: 64% VPD: 1.32kPa Plant #1 Height: 21 inches Plant #2 Height: 16 inches Light is 13” from plant 🌱 #1 Small was sweet today, that seemed new for sure but I think it’s the sugars in the Quillaja extract. I disconnected the humidifier and plugged in the heater into the UIS plug so that I can start controlling the heat at night.
Likes
12
Share
@RoyColt
Follow
Day128 07/04 Defoliation. Day129 08/04 Defoliation. Day130 09/04 4lt ro water -20ml Finalpart Terra, Total 740 ppm , ph 6,4 Drain 500 ml 1150 ppm. Day131 10/04 Defoliation. Day132 11/04 Rinseout Day 5 lt ro water -5ml sensi cal mag extra, Total 200 ppm, ph 6,5 Drain 1300 ml, 750 ppm.👌 Day133 12/04 Defoliation. Day134 13/04 Rinseout Day 5lt ro water -5ml sensi cal mag extra, Total 200 ppm, ph 6,5 Drain 1500ml, 550 ppm.
Likes
3
Share
@Rumyn88
Follow
Hey all, its our 2nd week after casing drop. Facing some issues with Night temp, sometimes it could fall to +12C, thinking about how to improve it. Also concerned about slow growth because of that. Using just 1/3 of Plagron recommended dose. Modified a bit my tank, made some technical window. Also set up automatic irrigation, because wool started to dry up during the day Upd Sunday 10.12.2023, Decided to put Babys finally to Seramis. Washing ceramics is some kind of hell: -First, I decided to sift all the dust through a sieve, stood in a half-bent position with bags of Seramis for 30m (my back didnt like it), but there was a lot of dust. -then I decided to check the Ph and rinse thoroughly. Although the package says 5.5-5.7 Ph, after the first flush with a balanced solution at 5.5 Ph, there was 6.5 in the drainage. - I was concerned by the very muddy brick colour water, then got tired of mixing 5.5 in a bucket for flushing and decided to rinse it with tap water from shower and then balance it back to 5.5 Ph . As a result, I poured from the hose for another 30 minutes until the water became more or less transparent. -I also tested FloraFlex discs, they drip great and, although round, fit perfectly into my square grow bags. -Meanwhile, the Milwaukee Ph meter broke down, even the readings of the calibration buffer were changing from 4-6 Ph within one minute. In the end, I spent another 30min and half a bottle of buffer on this too. It’s good that i had yellow Chinese Ph meter, which even after 3 years of rest in the box showed accurate buffer readings. -Finally, the Ph of the drainage was 5.5-5.7 and it was transparent, so I began to move it into the growbox. I sprinkled it as much as I could, it was impossible to dig deeper. The plants do not yet reach the matrix disk, so for now they will grow with the usual felt. -The cap of the tank is very thin and cannot withstand the weight of 2 grow bags, I’ll have to come up with something else, maybe I’ll put some kind of drainage grid. Watering will be from a tank with a mixed solution of 5.8 Ph and 1.1 EC.
Likes
5
Share
@VeeDro203
Follow
Everything looking good so filmed!. Pulled a couple fan leaves. Fimmed.
Likes
14
Share
@GrowBuv
Follow
I knew I was right not to give up on her. Wow what a transformation since I last seen her before catching Covid! She looks healthy as can be. Fingers crossed she can produce something nice for me.
Likes
6
Share
I Topped Dressed 5 Tbs of 2-8-4 & 2.5 Tbs of 4-4-4 & Feed 1 Tbs of Molasses in 1 Gallon water Feed
Processing
Likes
4
Share
Growing good, haven't noticed any worrying signs, RP is happy I guess in it's tent ;)
Likes
32
Share
@Freddd
Follow
OK lots of excitement this week. I could stand by and watch no longer something had to be done, but what? Let's turn to the strange leaf problem first. Copper necrotic spots. WTF could this be, it's nothing to do with nutrients or pH that I'm pretty confident. Maybe it's just normal leaf dying. Whatever. I've supplied some photos where you can see a pattern of concentric rings. This tends to make it look more like some sort of mosaic virus, however if that were the case it would be everywhere. It looks like something was spilled on the plant but that did not happen. I don't deem this a problem at all but it's very very puzzling. Anyway after mulling the situation it seemed like it was about time this giant leaves were gone. So all the giagantic huge chunky leaves were removed. I figured whatever they are making there's plenty more healthy leaves to carry on the work. Plus I think it induces some shock to the plant. It will definitely shift hormones around but what effect that has I don't know. It looks like I've done a lot of work on this plant but I haven't really, just trying to see what she wants to do. So all that's happened is the first two branches that come out with the first baby leaves have been removed all other branches have developed normally. Then the four branches from the first two growing nodes have been pinned down to give the plant a bit of space. Edit: I've just pinned the lowest branches back a bit more and removed any fan leaves around the top as there seems to be plenty around.
Likes
60
Share
@Clutch
Follow
Back to moving the plant in and outside. Bad weather coming up😕 This week was average, a few good sunny days but also cold nights. Started up with the green sensation and alga bloom. There are fan leaves that are showing a pretty quick yellowing. Not so healthy and green anymore now 😁This is maximum week 5 of flowering so it's a bit too soon to be losing leaves like that.. I'm Thinking she has a N defenciy because I barely gave grow nutrients since it was in the soil for the first 6 weeks. Second thing is a lack of light for those leaves. the Alga Bloom has N in it so I hope they revocer it a bit. The leaves on the buds themselves look good so it's probably the plant using the leaves for nutrients in this stage. Let me know what u guys think....? Update, look at the video, dirty bugs😠😠😠 caterpillars I think🤔 took away some infested leaves. And some of those fuckers. Hope it doesn't get worse Buds are starting to thickening, she has a little smell on her too by now. They already have some brown pistils on them. Nice plant but I hope the yellowing doesn't go to fast. 1,5L water with 4ml alga bloom and 1ml of green sensation was given this week. Will continue to give this for the next 3 to 4 weeks. Happy growing friends.
Likes
14
Share
The Amnesia haze 2 is turning light green yellowish some told me it could be deficiency or it could be just flowering taking energy from the leaves but I’m not sure I used Gaia green bloom recently thinking it would help I’m going to too water that haze from here out the other have and sour I’m going to continue to bottom feed I took some trichome pics I don’t think there ready yet but I think I’m getting close to the date I feel the the amnesia haze 2 is going to hit 90+ days tho kind of hope not cause the other haze and sour are probably going be done sooner I want to fry them all at the same time March 7th I think the haze #2 and Sour d is ready but the other Haze is not I’m pretty sure I have another week pre maybe even two for it to be near ready I need the tent to harvest and dry what’s ready I’m going try leave the ready ones in for another week in hope it doesn’t mess them up
Likes
60
Share
@Roberts
Follow
Alaskan purple auto is growing great under the Medic Grow mini Sun-2. She should start bulking very soon. I have not done much, but add a little solution or water at times. 🤞🏻 for some nice flowers to form. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻💪🏻❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
5
Share
Processing
Likes
Comments
Share
Likes
11
Share
@w33dfoxPT
Follow
THIS IS NOT GELATO: IS MORE ONE HARVEST OF REST OF OTHER PLANT AND OTHER ONE. BECOUSE CONTESTS I CANT CHANGE IT SO, I WILL WRITE SOMETHING LIKE I HAD DO THERE, IN MARK AS BLUECHEESE THE GELATO ONCE I HARVEST SHE. NEXT TIME I WILL DO A DIARY FOR EACH SEED TO AVOID THIS CONFUSIONS. SORRY