Likes
10
Share
@Fuzzel
Follow
Strong initial growth. Had some trouble with the pot being too small and probably overwatering. Lost half the leaves during first weeks of flower but recovered in the end.
Likes
4
Share
@trigs
Follow
Fought root rot/res/nute issues all week, but seemed to have turned the corner. Nice steady growth. Cleaned the res hard at the start of the week and continued to treat with H2O2, and switched to Lucas Formula for nutes along the way. I added ~30mL of 3% H2O2 daily for 4 days before the smell seemed to disappear and roots recovered. Afterwards double dosed the hydroguard again. Noticing very dark and shiny leaves with some clawing. I hadn't been measuring the EC in the res and figured I burned the plants. I replaced 1 gal of the res with pH'd tap water to reduce the EC/PPM. Did not take exact measurements. My notes get thinner from here as I had too many plants going at once to properly document this first attempt.
Likes
12
Share
@BloodBath
Follow
Plant starts off slower than others. But once she’s in flower and starts packing on resin and changing colors, everything changes. The plant reeks of funky terps and citrus and just stinky goodness. The colors are crazy ranging from pink to blue and purple. Highly recommend this strain and she produces super fat sticky buds. She’s a keeper.
Likes
5
Share
Growing like a weed..... up to my chin now and I'm about 5'11" I feel I'm going to have to add some serious reinforcement to these branches. The blueberry cheese has some heat stress as it's out in the sun all day, also s9me twisted growth I've never saw before.
Likes
11
Share
Likes
9
Share
Hallo zusammen 🤙. Habe sie heute geerntet. Wir hören uns in 3 Wochen mit dem Erntebericht. Wer einen Rabatt von 20 % haben möchte muss den Code: ZAMMIGROW2024 eingeben.
Processing
Likes
27
Share
9.26 - The Dumpster Queens is really starting to stank good. Very diesel and earthy! The buds are still putting on weight and are dense, very little squish or give when I give em a moderate pinch. I am imagining I have ~3 weeks left before chop.
Likes
16
Share
@DabBod
Follow
This week went well no real problems besides underestimating the amount of water I would need to prepare following the transplant. I’m noticing some older leaves showing some curling at the tips especially on the second pheno, I’m going to let it ride for the next week as it could be attributed to the transplant although the signs point to n tox I’m using slow release dry amendments as directed I don’t think this is the case. I may add the trellis net next week if the second pheno can catch up in heigh.
Likes
6
Share
@XanHalen
Follow
Officially week 7 Dec 31: Came back a week later to very heavy pots, needed 36 hour drying period, not happy, smaller plant has tips of leaves curling down, some like taco, dryed out the pots and went back to normal conservative feeding, need to fine tune the auto irrigation setup before I use it again for sure. All in all, nothing crazy happened. Really cool to see a plant be small, but way bigger after a week of vacation. First grow seems to be going pretty good! PS: I think my hygrometer is broken, saying 85-100% RA even when I significantly improve airflow and it doesn't seem anywhere near that. Gonna do the salt paste test on the hygrometer . Jan 1: I recalibrated my hygrometer and it’s working great, weird leaf curling of smaller plant still happening but seems to be improving, big plant is frosty and fat for week 7, seems to be at same stage in development as smaller plant but the pheno is beautiful.
Likes
8
Share
Ciao a tutti! Scusate l'assenza sulla piattaforma! Ecco voi le piccole del Ciclo The Barney's! Ormai sono in fioritura da 2 settimane Ho prelevato delle talee toppando il primo internodo siccome la maggior parte delle volte se lasciati sulla pianta mi risultatavano alla fine cime pop corn. Una settimana circa per radicare e una di vegetativa e ripresa dallo stress del trapianto prima della fioritura! Speriamo si evolva in un raccolto sostanzioso ma soprattutto di qualità
Processing
Likes
3
Share
2nd week in flower from clone taken on 3/11 so today she is 1 month old as a clone. And this is one of the better clones I have taken and grown.
Processing
Likes
3
Share
this week was a lil challenging, had to get out of LST due to the fact that I broke a branch and that just tripped me off and I took off all my ties , apart from that i started giving her bloom products because I noticed a few hairs. I started applying tiresias mist to one of my branches so I can get pollen sacks to produce my own fem seeds, as I plan on crossing my fortune cookies autoflower with my ak48 autoflower and creating a new strain called "DRAKO" AUTOFLOWER well till next update . O.G. Bang Bang !! out.....
Likes
2
Share
@Cornfed
Follow
This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.
Likes
7
Share
Hi dear smokers and growers!! 😎 Chilling Racoons here 😏 We will show you one of the new genetics of Royal Queen Seeds, the Milky Way F1 Automatic! 🤩 F1 seeds have unparalleled uniformity, impressive resistance to disease, great productivity and flavours and effects that will inspire you to grow these seeds again and again. So we are sure to grow big and stable plants, we have only to cure them well!! We are excited to try the Royal Queen Fertilizers like the tablets and the easy boost! They will give a big kick to our plants 🤩 🤩 🤩 We posted some of the RQS Ferts and Merchandising, look at the stuff, I am happy like a child 🤤 Royal Queen Seeds is one of the biggest seed bank in the world, in addition to a wide variety of high quality seeds, on their site you will find many accessories for growers and smokers. Take a look to our friends! https://www.royalqueenseeds.com ✅ 🌱#1 WEEK VEGETATIVE🌱 💉🔍Fertilization schedule:🔍💉 📅 EASY BOOST MIXED TO THE SOIL 50g/pot Both seeds germinated in 48H, after the root came out, we immediately planted the seed in the soil. We are growing MILKY WAY AUTO #1 in a 11L Plastic Pot and the MILKY WAY AUTO #2 in 15L Smart Pot. Seeds are directly planted in the final pot to avoid transplant stress. We planted these seeds in different pots to see if there are difference in growing and yield. Germination rate: 100%, Royal Queen, what a pleasure to grow their seeds. 🧐 🤓 Milky Way F1 data sheet 🧐 🤓 Variety: F1 Hybrid auto Genetic Background: Blue Mammoth x Blue Dream x Sin Tra Bajo Auto THC: Very high Yield: XXL Height: 55 - 75 cm Flowering time: 42 - 45 days Harvest: 70 - 75 days after germination Major terpenes: Farnesene, Myrcene, Pinene Effect: Creative, Euphoric, Physically Relaxing Flavor: Chocolate, Citrus, Pungent, Skunk Climate: Short Summers 💸💸💸💸💸 Buy Milky Way F1: https://www.royalqueenseeds.com/uk/f1-hybrid-cannabis-seeds/617-milky-way-f1.html _____________________________________________________________________ OUR GERMINATION METHOD STEP BY STEP We germinate all seeds in cotton pads because in my opinion is the best way, I'll tell you why. You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way because with these few steps, you could have a 99% of success if seeds are fresh (we store our seeds in a dark and sealed container in the fridge and they last years!). This is a NOOB-FRIENDLY technique BUT you have to respect some little and easy steps: 1️⃣take one cotton pad, spray it 5 times with water; 2️⃣dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, 3️⃣take a new cotton pad, spray it 3 times with water, face the wet side down and put it on the seeds of the first cotton pad; 4️⃣spray the dry side 3 times. 5️⃣put your "sandwich/es" in a sealed dark container of a sufficient size to store them, I use a plastic container (glass or plastic are equal) with about this size: 15x30cm .It contains about 8 "sandwitches". 6️⃣store the container in a dark place with a temperature from 17°C (23/24 °C are optimal)and more. REMEMBER: More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster. Old seeds and maybe stored in a very hot place for a long time may will be death and may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell this is the fastest and reliable way. I loved to use paper towel but with this method is very easy to put too much water... I really hope that this "rule" will help all growers to improve their skills. ENJOY. _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was incredibly fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for an excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. -BIOBIZZ: CAL-MAG, great product to correct deficiencies without Nitrogen! ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
82
Share
Hey everyone! Here's the Week 6 update! 😀 and I had some issues! Nothing too serious but still worth mentioning! I had some kind of algae growing in my medium so I stopped watering the plants for a while (I used to feed them twice a week) and I just did it once this week to wait for the plants to use more of the water inside their pots and I think it did work! I also removed most of the soil on the top to avoid spreading anything dangerous to my plants! 😭 Besides that I started doing a more aggressive LST and I also pruned some of the bigger sugar leafs 😲 My plants were also somewhat overfed (or I was close to nutrient locking them) as some of their leafs were quite dark (you'll be able to notice the difference from the color of the new leafs vs the old ones) so for the next schedules I'll just feed them once per week or feed them once then go only with pH'd water and then go back to fertilizers to avoid damaging the plant! 💀 On another note, the smallest plant has grown quite well so next week I'll be swapping her to a new por! I think she deserves it! The 3rd plant now has a name and it's "Boomer"! 😍 I also decided to go for 4 colas instead of 8 because the size available in my tent is small and I don't want risking my plants fighting for light in such a small space! 😢 Anyway, thanks everyone for reading everything so far! Take care! 👽