Recommended
Likes
Comments
Share
Harvest day 62 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 16-18 degrees and 55-59% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
Comments
Share
Likes
33
Share
@Roberts
Follow
Cali Crasher is growing great under the Hortibloom Solux 350. She got some heavy training today. The light schedule was also changed to 12/12. Everything is looking really good. Thank you Hortibloom, and Doctor's Choice. 🌱👍🏻🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
Week 6 sticky wasabi. plants growing and bounced back from LST they are growing fast with no problem, a few of them are growing with tight nod spacing and they still loving the 24 housrs of light under 580wats led lighting, THIS FEED they av took 40l between the 14 of them,.. @growerchoice @SHOGUN COCO A 4ml/L 160ml @SHOGUN COCO B 4ml/L. 160ml @SHOGUN ACTIVE BOOST 2ml/L. 40ml @SHOGUN CAL MAG 1ml/L 20ml @SHOGUN ZENZYM 2.5ml/L. 100ml
Likes
58
Share
Hey everyone :-). Today we have flowering day 30 since the time change to 12/12 hrs. This week they continued to develop very well 😍. The two babies in front will probably stay in their small size, which is not a problem because the small tent is intended for such test purposes 😀. Nevertheless I will do Scrog again next time 👍🤪. The flowers have started to swell and the resin is starting to spread 😍. A new water heater was installed and the tent was cleaned. The water was changed every 12-15 days. Otherwise there is nothing to report this week. I wish you all a lot of fun until the next update. stay healthy and let it grow 😀 You can buy this Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧
Likes
7
Share
@MrRaid
Follow
She had a simple life little lst but thats about it she looked small as a plant but ended up being my highest yeild plant over 100 grams dry flower had couple problems with me feeding to much but sorted out just fine overall its a nice plant to grow very quickly and easy just don't get carried away with food my experience less additives the better grow simple with autos from fastbuds especially 2 or 3 additives is plenty or your gonna run the risk of buring them 😤 grow for this plant was 10/10 hardly any effort needed 70 quick days
Likes
5
Share
@Nvchods3
Follow
Esta semana se empieza a fertilizar con Top candy y top bloom. se le realizaron podas de bajos para aprovechar la luz.
Likes
1
Share
She is a stinky, sticky beauty! Not doing much other than watering ✌️🏻💚🤣💨
Likes
4
Share
Bientôt la floraison s'annonce rester concentré les growers. My favorite.
Processing
Likes
8
Share
@Belivitez
Follow
I have problems with cal/mag... But this week i will transplant them 💪 Clones get roots already ❤️
Likes
11
Share
Well they reacted really well to latest lst and it really worked in helping get as much light as possible to as much as the plant as possible not long now before I flip them into flower roll on next week
Likes
42
Share
Since the transplant to their 1 gal airpots they took off. Further nothing to report 💪 Stay tuned growmies 🌱
Likes
198
Share
@DevilsBud
Follow
New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
16
Share
@Comfrey
Follow
Blackberry Kush is in flower. Healthy plant with some leaf anomalies which I can‘t identify. Someone have an idea?
Likes
37
Share
End of week 10 - Day 70 / 35 of flower Another good week at the parlour. A lot of hours spent in the tent yoyo-ing the biggest colas. Half way through the week nearly all of them had fallen over so I had a full evening trying to make some space and hanging them up. I messed up a feed at the beginning of the week and over fertilised them with PK which can be seen on some leaves. For the last 3 feeds they've been on only 0.5ml per litre to try and reverse a bit of the damage. After today they come off PK completely and onto the BioGreen X-Blast. Obviously with this being my first grow I have nothing to properly compare too just other diaries. Only 1 or 2 of my friends grow their own medicine but regardless I've never seen weed like this (in person) in my life. The frostiness is next level. Even with the lights on you can see just how many Trichomes these have produced. It's looking like they will only need another 3 weeks. Plan is to carry on following the feed chart for for another 2 weeks and if I see any signs of cloudy Trichs I'll start to flush them untill they are 50/50 cloudy and amber. I really hope these keep going strong. I just cant wait untill I can pack a bong and take a rip of my very own home grown weed!
Likes
3
Share
@603grower
Follow
Haven’t been updating lucky this grow is on auto pilot. All I’ve done is use the vegbloom line and si until week 6. Everything is just about done I’m flushing now. The gorilla chem need another week she is still being fed. Going to harvest all hit her this week!
Likes
31
Share
I did feed her with Recharge and Big Bloom last weekend, but since then I've been giving water only and gave a good flush watering on Thursday. I am planning on harvesting her in stages. I'm going to cut the top 2 nodes (the ones with the most LED burn) on Monday, then cut the rest of the plant next weekend. I'm curious to see how much the lower buds benefit from this. Green Crack is the plant on the far right in the group shots. Update: I started cutting her down today. Cut down the top 2 nodes and left the rest of the plant. Will let the rest grow one more week before taking her down completely. So far 6.5 oz wet weight. That alone should be over an oz dried! 👍 New pics added too