♥️☺️♥️ Thinking about when exactly to harvest... Buds seems keep growing now... I know I should wait a bit more but.. I think I will. ☺️♥️☺️ 👉 27th of september 2021 / DAY 64 👉 Buds seems to keep growing on the top to top direction. 👉 28th of september 2021 / DAY 65 👉 MAX 26.9°//64% MIN 21.9°//40% 👉 29th of september 2021 / DAY 66 👉 WATER + CITRUS DROPS : EC : 0.3 / p.h. 6.4-6.5 / 22.0° / 9 Liters Run-off (first 10-20 ml about): 3/3 : [x] [0] [0] : EC : 1.2 / p.h. 6.6 / 21.7° --> Added more drop off to reach : 0.7 E.C. 1/3 : [0] [x] [0] : EC : 2.0 / p.h. 6.0 / 21.0° --> Added more drop off to reach : 0.7 E.C. 2/3 : [0] [0] [x] : EC : 1.2 / p.h. 6.8 / 22.0° --> Added more drop off to reach : 0.8 E.C. This was their last meal 😭😵 👉 30th of september 2021 / DAY 67 👉 Pistils are pretty much brown, I can see some brown trichomes and mix of milky and white. I deciced to make A DWARF ESCAPE tomorrow. Tomorrow is the day, Tomorrow I will harvest. Tomorrow orcs will die ! According to my lovely (I definitly love them) breeder informations : 👽Flowering time: 6 - 7 weeks 👽Harvest Month: 9 - 10 weeks after sprouting. I am at week 6 of flowering, but week 10 after sprouting. So I should be in the good range. 👉 1st of october 2021 / DAY 68 (1 day later could be more sexual) 👉 Everything has a start, a first time, and 1.10.2021 was perfect to end my first harvest. You can read the harvest page. The murder (the escape sorry) of the 3 dwarves happenend around 4 p.m. or 16h00 in an unknown place full of dark but with no pain (almost).

The two Tropicanna Poisons are truly beautiful for different reasons. One is a beautiful and perfectly normal plant with a 16 topping that has suffered a few deficiencies but is now rehabilitated and ready for flowering. The other is a beautiful mutant plant that at one point threw a polypeptide internode and I took the opportunity to make a very special and unique topping to see, there is an internode at 3 and it will look very strange. Sun Powered by Viparspectra. https://www.viparspectra.com/ Sweet Smokes https://sweetseeds.es/

Totaly forgot to take some pics from the dutch passion strains this week... all I got is a group photo and short video! Could have been a bit more hands on with the training but seems a like a nice and even canopy it´s emerging 😍 Defoliated a bit and trimmed the lower branches.

End of Week 12 (Fifth week of flower) The ladies are smelling reDANKulous and are so frosty and sticky I can't remove fan leaves without getting my hands sticky. Next level terpene profiles. I did a final increase in CO2 to 1500ppm. The main top-sites are taking shape. I have been keeping a cooler average temperature - and also keeping the relative humidity lower. Pest Report: None

Day 57 Day 15 flower - what can I say? No issues reported so far, did some more defoliation below the scrog and tidied up some of the flower sites, removed a few of the old fan leaves and checked on Zkittlez OG, she is frosty already and starting to look really sparkly and beautiful 💎😍 The others are also showing some frost and bud development is going well!! Exciting times ahead! 290319 day 59 flower day 17 - no issues apart from slight heat stress for the girl in the middle, will adjust the light tomorrow to ease the stress. Bud candy just arrived so I will add 1ml/l on next feed tomorrow morning! Overall the bud sites have came through in numbers and are looking very strong and healthy, OG Zkittlez auto has turned into diamonds of trichomes and the others are following suite 😍 more updates to come! Hopefully skittlez is finished in the next 3 weeks! Also added a rotating flow to get good air flow in the tent, there were some dead spots. 020419 day 63 flower day 21

topped August 28th 2018

Hi guys. The girls have settled into producing bigger buds this week and have no signs of issues. I think two of them may have at least 2 or 3 weeks left and the big plant may have 2. This is the time I struggle with the most using autos. The breeder states a harvest time but this is under ideal environmental conditions and I am not clear if I have provided the perfect environment. I am going to let them go until hairs turn 80-90% orange. Overall they are looking frosty and feel very dense. This is the part were being patient is very important and imo the most difficult part of any grow. I just want to cut one bud off and smoke it 🤪 but I won’t. I have uploaded a picture of the new seeds for my next grow. Moving to photoperiods next grow woohoo. If anyone had any suggestions please comment and let me know 🧐 Cheers guys Microgrowery

Light = bloomplus bp2500 250watt actuall draw. Exhaust is a ac infinity 6inch with digital controller Inkbird humidity controller with a ram 5l humidifier. Veg only! Soil= biobizz light mix Nutes= biobizz using the 10 week schedule at half dose this run. Heaven =2ml avti vera=2ml Topmax =1ml bloom = 1 calmag=2ml Grow=1ml All nutes mixed to 1l of water Ph= 6.4 Room humidity is 60% Day Temp is 25°c So entering week 3 and the girls are growing fast, gelatocake are putting out pistils to show there sex. The sherbert mimosa are still growing strong and I will bend them and tie them down today. Happy growing guys 👌💪💚

Shots of the girls on the end of week 6. Had problems with one of them the leaves were crisp and brown spots showing so i flushed the root zone and add a lighter nutrient mix to the coco. And hoping that fixes it.. apart from that the others are swelling up nicely coming to the end soon. Some shots of the Trichomes too :-)

Week 9 veg Sorry for the long absence, I had some fam issues I had to take care of. In today's video we go over the neutriants, and introduce the new placement of our grow tent. Cheers everyone! -G.I.JOSE

This hybrid is the result of crossing an automatic Critical Mass strain from Sweet Seeds´ R&D Department, chosen for its fast flowering and agreeable, intense aroma, with a selected strain of very fast flowering SWS25 (Speed Devil #2 Auto®️).

Nearly time for harvest, 2 weeks to go roughly

25/12 se realizo fertirriego. 27/12 riego con agua. Se observa un crecimiento vigoroso tanto de parte aerea como radicular. Hoy se realizaran transplantes a masetas de 10L El dia 30 se regará con agua

Day 44 - The pot this morning was light as a feather so gave her a gallon of water and nutes today. Overall, she still stretching quite a bit each day. Other than that, just tucked some leaves again and letting her go. Day 45 - All is looking good and still no real issues going on. I did remove a few lower fan leaves that were dead but other than that, just put her back in the tent and tucked the leaves again. No need for water yet, will be another couple of days. Day 46 - All still looking good with her. She’s still stretching about 1/2” everyday so should be decent sized by the time stretching stops. She’ll need some water tomorrow or Sunday. Day 47 - Gave her a gallon of water and nutes today and I’m gonna see how long it takes for her to drink it up. I might have to up the intake to a gallon and a half depending. Other than that, I removed a couple big fan leaves in the way and placed her back in the tent for the evening. Day 48 - Seems like she budded up quite a bit after the watering and feeding yesterday. Maybe the stretching has slowed down a bit cause she only stretched a little less than half an inch. Hopefully now she’ll really start packing on and frosting up. I did remove quite a few fan leaves as well today. Day 49 - Ending week 7 and she’s coming along beautifully. Checked my intake and outtake exhausts and were pretty dusty so took all the plants out of the tent and did a complete cleaning of everything. Removed the humidifier to give a little more room in the tent and temps are rising a bit but sitting at 82. I’ll leave it alone for now but if it gets too much warmer, I’ll have to figure something out but humidity is right around 36 and buds are starting to boom now.

i bet all on the wheater... very nice purple buds are coming

I harvested my pollen sacks plant looks healthy at this point I dont feed till harvest just water every 3-4 days. think o got 21 more days to go b4 harvest but until then I'm just checking out my trichomes so that I dont harvest to late .....one love and dont forget weed is love so share the love with those you know .......

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Her final week of flowering start of week ten of flowering will be chopped next Tuesday then I'll post final results. I'm praying for 8 zips I really would like to break my record my biggest autoflower haul has been 7.5 zips dry! Second being 6 and then 5 and half. My average is 4 zips while minimum 1 zip. This girl was hard to keep up with feeding. I was watering it everyday for the last 3 weeks believe it or not. Biggest auto grown wide as fuck. Lst to perfection. Idk what else to say one happy auto grower as always :)

Here we are. Week 2. On the Day 8 video, I give my method on how I produce nearly zero larf and huge buds. It's easier than most think 😉