Likes
Comments
Share
@Skull
Follow
Has anyone else grown Buddha magnum Auto before I'm 30days in no sign of flower. As far as I can research it's 100 day Auto any thoughts would be appreciated
Likes
Comments
Share
@UrbanBoer
Follow
I would be lying if I knew how far her flower phase come, this couple weeks been absence only gave me results, and left me with a catalogue nightmare, but thank goodness my previous posts are dated, so it gives a rough idea, but genes differ within strains, some strain grow vigorously at certain stages, and I think this baby hit her phase. She will be my best tree when it comes bud quantity, when it comes to potency, I will have settle with what I encounter and except the outcome.
Likes
6
Share
Water + Ata Clean for her too. She remains the most compact and resinous of the bunch. The buds are dense and naturally clean, with tropical aromas reminiscent of papaya. She's ready for a clean flush and a very flavorful harvest.
Likes
48
Share
Took of the humidity dome sooner than I wanted. I swear it makes em stretch. Also turned up the light! Got get the RH up a bit but these babies are up outta the ground and doing their thing! This will be the first grow that I try to water according to the plant and NOT a schedule, therefore prob wont be watering much this week! __________________________________________ Not much to see, but not much to worry about! Gave em a little water just to get the top layer wet. Being much more patient and calm with these seedlings. 2 of them did stretch more than my liking but it shouldn't matter at all soon.
Likes
18
Share
@GlyoFE
Follow
Friday 1st December 2023 So today marks the start of week 2! Both plants are growing every day, everything seems to be going well so far! The TS600 *should* be arriving this weekend so that will be a nice upgrade. I've started with nutes today, introduced CalMag, Biobizz Grow and Canna Rhizotonic whilst following all feeding advice I can find online. Got my PH Pen calibrated properly today, after mixing my first batch of feed the PH was 8.7! I'm glad I took the time to review those readings as I'm sure this would've been very bad for the plants. Brought the PH down to 6.5 on the nose and gave both plants a good watering, won't give them anymore for a few days and see how they respond over the next few hours. Fingers crossed! Any advice on watering, feeding and nutrients would be greatly appreciated 🙂 Saturday 2nd December The post man must've hated me today! Lots of stuff delivered for the tent and I've installed it all, up and running! Gone for a 4 inch inlibe fan with carbon filter exhausting out the top of the tent, completely invisible from the outside, almost silent and feels like good airflow. My Mars Hydro TS600 also arrived, so hooray for no more purple photos! The light intensity is a huge increase over the amazon special in the tent prior to this, but it's done well so far so I'll stash it away as an emergency backup unit. The TS600 seems to be a perfect fit in the 80x80 tent, it's exceptionally light and wickedly bright. Here's to hoping the plants benefit from a few conscious upgrades 😊 No watering today as media still damp, plants looking healthy and pushing out more leaves every time I check them. Hopefully we are doing well so far! Sunday 3rd December Plants are continuing to grow well, I do think the new light has made a good difference to them! Have made a point of swapping the pots left to right and rotating the plants to make sure they get even light coverage. Using the extractor and carbon filter now as the plants have started to give off an aroma. Going well and nothing seems to be struggling, I'll keep doing what I'm doing and follow my feed schedules. See you tomorrow! Monday 4th December Plants looking great again. After doing research decided to go up to my 11L pots in plenty of time to prevent as much stress as possible. Surrounded the old fabric pots with coir, surgically removed the old 7L pot with a razor blade and lifted it out ever so carefully. Went super smoothly, the roots are nowhere near the outer edges of the 7L pots anyway so they just slid out with minimal disturbance to the plants or the substrate around them. I hope this was successful as I took extra care and followed some good guidance. Lightly watered to encourage the roots to their new home, fingers crossed they hardly noticed what happened and have minimal stress as a result, but I'm expecting growth to slow as a result and I'll take it nice and steady from here. Tuesday 5th December Checked the plants at 7am before work and they looked very sorry for themselves. Droopy and exhausted looking, I spent the whole day at work convinced I'd come home to two dead plants from transplant shock. Instead I've come home to two ladies that have stretched their legs and grown even more! Super relieved, let's see how they go this next few days with more space to root in to 😁 Wednesday 7th December Plants are doing great! Spreading out and growing really well, the soil was bone dry when I checked them at 7pm so I mixed a fresh batch of nutrients up and gave them a steady watering. Lots of new leaf development, I'm really happy so far 🙂 Thursday 8th December Came home from work to lots more growth, as a first time grower it's absolutely amazing just how fast these things grow! They don't seem to be struggling at all and I'm being really careful watering them. I have also introduced a cheap 2L humidifier for the tent, running it on low to see how it affects the overall humidity as it keeps dipping low. It's winter here so really dry with central heating. I guess we keep going as we have been and see what week 3 brings us!
Likes
112
Share
Alright Then REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 We just hit week 5 and all is well , have to admit she been a little bit of the runt of the litter ,still she keeps on pushing forward 😃 ....... So this little sprout is tuff one and is doing very well , I've been doing LST and so far its paying off , I plan to do a little defolation later in the week 😏 rain water to be used entire growth Her little sister is about 12 days behind and is playing catchup and she's doing great 👌 Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎
Likes
26
Share
Finaler Grow-Report – Lemon Cherry Gelato Mein erster legaler Grow mit Lemon Cherry Gelato von Barney’s Farm ist fast abgeschlossen – das Curing läuft noch, aber es ist Zeit für ein Fazit zum Anbau! Setup & Bedingungen: Ich habe in einer Spider Farmer 90x90x180 cm Growbox unter der Spider Farmer SF-G3000 (300W LED) angebaut. Als Medium kam BioBizz Light-Mix zum Einsatz, gedüngt wurde mineralisch mit Advanced Nutrients (Grow, Bloom, Micro). Um das volle Potenzial der Pflanzen auszuschöpfen, setzte ich auf Low-Stress-Training (LST) und ein ScrOG-Netz zur optimalen Lichtverteilung. Keimung & Wachstum: Die Keimung verlief problemlos – 4 von 5 Samen sind innerhalb von zwei Tagen aufgegangen. Während der Vegetationsphase entwickelten sich die Pflanzen kräftig und reagierten gut auf das Training. Die ScrOG-Methode half, ein gleichmäßiges Wachstum und eine bessere Lichtnutzung zu erzielen. Blüte & Ernte: Nach etwa 6 Wochen Vegetation leitete ich die Blütephase ein. Die Pflanzen zeigten eine starke Harzproduktion und eine beeindruckende Farbgebung mit einer Mischung aus dunklen Grüntönen, lila Highlights und frostigen Trichomen. Das Aroma war von Anfang an fruchtig und zitronig, mit phänotypischen Unterschieden in der Intensität. Die Ernte fiel mit 300-350 g trockenen Blüten sehr zufriedenstellend aus – für meinen ersten legalen Grow ein starkes Ergebnis. Curing (still in run ): Aktuell lagern die Blüten in 24 Mason Jars (16oz) und einem 2L-CVault, um das Aroma weiter zu entwickeln. Derzeit dominiert eine zitronige Note, während die erhofften Kirsch-Terpene langsam stärker hervortreten. Mein Ziel ist es, die Haze-Noten möglichst gering zu halten und das volle fruchtige Profil herauszuarbeiten – der Prozess ist also noch nicht abgeschlossen. Fazit: Ich bin sehr zufrieden mit dem Grow – die Kombination aus hochwertiger Genetik, gutem Training und präziser Nährstoffversorgung hat sich definitiv ausgezahlt. Die Buds sind harzig, aromatisch und vielversprechend, und ich bin gespannt, wie sich das Curing weiterentwickelt. Der nächste Schritt ist, das perfekte Terpenprofil zu treffen – und das Curing geduldig zu optimieren.
Likes
2
Share
@midau
Follow
We are now on day 15 of veggie growing. The 5 that were first in the final pots have developed well. The other 4 that came later are a bit behind but that will definitely change. In 14 days the plants will be switched to flowering. I am excited.
Likes
39
Share
@G4NJAG4NG
Follow
Week 8 - day 50! Day 8 of flower. All of them are still going on strong! Loving there feed and no complaints whatsoever! Gonna raise the light over the weekend as it's a little too close for my liking, girls don't seem to mind! This is definitely a jungle 😂 Getting a heater when I'm paid to keep humidity low during lights off, lights on the humidity sits around 55% which is perfect but lights off it's getting far too high! Don't want to put in all the effort only to let mold ruin my entire crop! I will also get another fan, they need plenty of air circulation because they are all so close together! The flowers are starting to come through the scrog now, each of them are beginning to stretch too! Exciting times ahead! Feeding 2 litres every 2-4 days! I'm really impressed with these 3 gallon fabric pots too! I just hope the roots don't get root bound!!! They seem to be doing fine so far 😁 Happy growing guys and gals! The buds are coming!! Day 56 - video upload, looks pretty beautiful 😍
Likes
15
Share
@38PLAN
Follow
Pubblico oggi ad 8 giorni perché la settimana scorsa avevo pubblicato a 6 giorni così mi sono rimesso in paro,siamo arrivati alla 6 settimana di vita per le più grandi,quasi 4 1/2 per le più piccole, sono diventate altissime,una si é allungata un pò per via di una carenza di manganese poi risolta con l'inverdente SANA COMPO,però promettono bene sono molto grandi e già i prefiori strabordano di resina,continuiamo questo percorso e vedremo col passare del tempo la grandezza dei fiori
Likes
5
Share
@BunnyBud
Follow
My First Autoflower Growing Indoor 🌸 Finally! I've decided to document my very first autoflower growing experience, starting from scratch with a 60×50×104 cm growbox. It's small, I know, but perfect for learning the ropes and figuring out how everything works. Reality Check: My First Tests During preliminary tests, I discovered something interesting and slightly concerning: starting from 26°C room temperature with the AC running, my growbox hits 28-29°C in about 2.5-3 hours. The maximum peak? A whopping 32°C with lights on and the box fully closed! For now, I've put a damp towel inside - sounds like a DIY hack, but it actually works to stabilize temperatures a bit and reduce those thermal swings. The Economics of It All Smart plugs let me monitor power consumption in real-time - currently running about €0.11/kWh. In a few weeks, I'll have to turn off the AC (my wallet will thank me!), so the first weeks will be characterized by high temperatures around 30-31°C. Fortunately, September and October should bring cooler conditions. My Germination Strategy During germination, I'll keep the lamp 60 cm from the seedlings - that's the maximum height I can manage in this box, but it should minimize light and heat stress on those emerging roots. Later, when the plants are stronger, I'll transfer them to the larger 60×60×180 cm growbox. Oh, almost forgot! A 350 ml/h ultrasonic humidifier is on its way, which should give me much more precise humidity control. My Current Setup The Growbox: 60×50×104 cm - perfect for two autoflowers in 6.5L pots using LST (Low Stress Training). Lighting: Spider Farmer SF-1000D suspended via pulley system near the ceiling, with about 4-5 cm clearance for heat dissipation. Ventilation: 130 m³/h extractor (4" diameter) that expels hot, humid air directly out the window - genius for preventing the room from becoming an oven! Plus a USB clip fan for internal air circulation. Climate: Ambient temperature stable around 26°C; inside the box 27-28°C without lights, jumping to 32°C when they're on. Substrate: BioBizz Light Mix combined with leftover perlite I had - exact quantity will depend on what's available, aiming for the right balance between aerated structure and water retention capacity. Nutrition: BioBizz Fish-Mix for vegetative growth, plus Grow and Bloom. pH maintained between 6.2-6.5. No CalMag for now. Monitoring: Two digital hygrometers connected to an app - one inside the growbox, one in the room. So I can check everything from my phone! Humidification: Two traditional humidifiers, plus the ultrasonic one coming for finer control. My Observations and The Plan The ventilation system works well - it manages to prevent heat and humidity from building up both in the box and the room. That's a win! The germination strategy is simple: lamp at 60 cm and hope for the best. The first weeks will be challenging with those high temperatures (30-31°C) when I turn off the AC, but then autumn should help me out. The plan is to grow the seedlings in the small box, then transfer them to the big one for flowering. Meanwhile, I'm monitoring everything: temperature, humidity, power consumption. The goal is to optimize the on/off cycles. Final Thoughts This first cycle is more of a technical experiment - I want to understand how to manage climate and lighting, stabilize temperature and humidity according to what the plants will ask for at each stage. The transfer to the larger box and winter approaching should improve conditions for optimal growth and flowering. I'll update this diary with all the quantitative data: yields, organoleptic characteristics, setup modifications. It'll be interesting to see how this first adventure turns out! Stay tuned for the next update! Ps: there is also a hole where the air enters passively, only it is hidden by the fan ❤️ 😅 ==UPDATE== BY INSERTING AN ULTRASONIC HUMIDIFIER I ACHIEVED THESE RESULTS, WHICH IS PERFECT 🌡️ Temperature: 23.3°C / 73.9°F 💧 Dew Point: 16.0°C / 60.8°F 💧 Relative Humidity: 63.6% ☁️ Absolute Humidity: 13.3 g/m³ 💨 Vapor Pressure: 18.2 mbar 🌱 VPD (Water Stress): 0.66 kPa 💨 Air Density: 0.012 kg/m³ ✅ Comfort Index: 100/100 🌿 Heat Stress: ✅ Optimal 🔋 Battery: 100% ⏰ Last update: 08/17/2025 12:49:35 I created a Python script that, starting with just 2–3 parameters measured by my Govee H5075 hygrometer, uses real scientific formulas to calculate all the other environmental values. This way, I can monitor my grow box much more effectively! I knew AI and programming skills would come in handy for this too lol ❤️🤣
Likes
18
Share
Likes
20
Share
All looking frosty around day 42 of flower! Just been on water for the whole of flower! Watered with aact as well every other week but real happy with this run!
Likes
92
Share
Week 7 Veg Report 🌿✨ Hey Grow Fam! 🌱 Week 7 of veg is here, and let me tell you, the grow room is buzzing with life! Each of the girls is showing off her unique personality, and I’m especially stoked about the Papaya Zoap—she’s really coming into her own! The scrog net is nearly filled out just how I wanted it, and I can feel we’re so close to flipping to flower. The anticipation is real! 😁 But before we get to flowering, let’s take a dive into something that makes this grow so smooth—ThinkGrow LED drivers and cables. ThinkGrow LED Drivers – Plugging Into Success 💡🔗 This week, I had a chance to work deeper with the ThinkGrow LED system, and honestly, it’s like a dream come true for efficiency. I’ve been using the TLD-4 Four Spectrum Control Channels Model One LED Driver, and let me break down how it works. The drivers attach directly to the bars—super sleek and no extra bulk. And, the connections? It’s a matter of matching the male and female connectors on the TDC-2 Daisy Chain Cord. It’s like a simple puzzle that snaps together perfectly. The TDC-4 cord takes it to the next level, connecting the top bars to the ICL-300 Inner-Canopy LED Bar, giving complete control and balance across every layer of my canopy. Why is this important? The driver-to-bar connection ensures that each LED bar is operating optimally, and the daisy-chain system makes it effortless to manage multiple bars without a ton of wires everywhere. It’s neat, efficient, and delivers even light distribution, which my plants are loving! 🌞 Are My Girls Ready for Flower? 🌸 When I look at the plants up close, it’s like they’re whispering, “Flip me to flower already!” 😆 Their growth has been so vigorous, each filling out the space with character, and that scrog net is almost fully covered. So, I’m thinking we’re super close to the big switch. Each plant has its own pace, but as a whole, the grow is looking fantastic! Room Stats – Tuning Into the Environment 🌡️ The TrolMaster system is still killing it with data and control, making it easier for me to keep everything balanced. Here’s a quick breakdown of the week’s environmental numbers, and a few jokes along the way! 😜 • Room Temps: Max 25.5°C | Min 24.4°C (Keeping it cool but not too chill!) • RH: Max 76.4% | Min 67.1% (Humidity stays right where it needs to be.) • CO2: Max 832 ppm | Min 420 ppm (Shout out to that magical 420! 🌬️😂) • VPD: Max 1.06 kPa | Min 0.64 kPa (All dialed in for peak veg mode.) Light Levels – All in the Details 💡 • Max PPFD: 506 | Min 0 (because, you know, when the lights are off, it’s dark! 🌚😆) Keeping the light intensity balanced, and using the ThinkGrow LED system to spread that goodness across the entire canopy, I’m seeing explosive growth. Those PPFD levels are perfect for this stage! Water & Nutrients – The Lifeline 💧 • Solution pH: Max 6.32 | Min 5.78 (Keeping it in the perfect range.) • TDS: 355 ppm steady (Every drop counts, right?) • Solution Temp: Max 23.5°C | Min 22.3°C (Keeping things cool, just like the grow!) And medium moisture? It’s a solid 100% thanks to my AutoPots and the genius of the AquaValve system. No electricity needed—just gravity doing its magic. It makes my life so much easier, and the girls are loving the consistent hydration! No more worrying about under- or over-watering. Why I’m Obsessed with TrolMaster 📱 I can’t talk about this grow without shouting out the TrolMaster system. Every bit of data—whether it’s temperature, RH, VPD, CO2, light intensity, or pH—gets tracked and displayed in real-time on my app. It’s like having a grow assistant in my pocket, making sure I can monitor and adjust at any moment. The level of control I get with TrolMaster is out of this world, and it’s helping me keep everything dialed in perfectly. Ready to Flip Soon 🌸 With the Papaya Zoap filling out so nicely and the rest of the plants following suit, I feel like we’re right on the edge of flipping to flower. It’s going to be a smooth transition, and I can’t wait to see these beauties bloom! Stay tuned for next week, where we might just make that flip! 😉 Environment Stats Recap 📊 • Room Temp: Max 25.5°C | Min 24.4°C • RH: Max 76.4% | Min 67.1% • CO2: Max 832 ppm | Min 420 ppm (Seriously, shoutout to 420 again! 😂) • VPD: Max 1.06 kPa | Min 0.64 kPa • Light PPFD: Max 506 | Min 0 (obviously, when the lights are off! 😜) • Solution pH: Max 6.32 | Min 5.78 • Solution Temp: Max 23.5°C | Min 22.3°C • Medium TDS: Max 430 | Min 420 (I can’t get enough of these 420 jokes! 😆) Final Thoughts 💚 This week has been a blast! Between the ThinkGrow LED system and the TrolMaster gear, I feel like I’m pushing the limits of what’s possible in indoor horticulture. Everything is dialed in, the plants are healthy, and the data just keeps showing that we’re right on track. Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
6
Share
Likes
53
Share
@Chucky324
Follow
Hello. This is the end of week 9 and the beginning of week 10 of flowering. Things are going well in here. I've got powdery mildew in the garden on the squash plant leaves but not in here yet. I was hoping when I crossed these strains that they would be pm resistant. When I made these seeds 2 years ago the Amnesia Lemon didn't have any pm even when other plants had it in the same room. And the Northern Lights has been pest resistant in the past. Thought these strain would go good together. Has a very nice sweet, citrus, hard candy, smell to them. I've cut down the male Lemnesia that I was crossing with the Pink Kush and Nova OG and put it in the compost. I hoping these seeds will be pm resistant too. The pm is in this part of the world and I have to deal with it so why not make seeds that are pm resistant. Makes sense to me. OK, Have Fun. Chuck.
Likes
20
Share
Hey guys :-) She is slowly catching up and starting to develop but a little slowly 😅 . She still has 7-12 days at most. After that she has to go to the bloom tent for reasons of time 😅. It was poured twice with 0.8 l each. I will not use training because of the time. have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://shop.greenhousefeeding.com/us/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/lemongrass/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
8
Share