Likes
Comments
Share
Almost there probably another 20-30 days for blueberry and white widow im guessing while peyote zkittles is taking her time
Likes
6
Share
Today will be Day 44. The girls fan leave did grew back. I cut off the leaves that overshadowed the buds sites . I used half of Open Sesame 3g w/ Lotus 6 week in flower.
Likes
10
Share
@coriander
Follow
Pretty simple first week! Seed took 3 nights for the taproot to pop and it was planted in its final pot on day 4. On day 6, it finally popped through the soil and on day 7 the little sprout is starting to grow up. There is a small piece of seed casing left attached. Going to leave it for a day or two. If it doesn't fall off, I'll do it myself. Thanks for stopping by! 🥦
Likes
19
Share
@Osrsbuddy
Follow
So I thought I was going to harvest last week but I decided not too because there were still a good bit of white pistils and none of the trichomes had turned amber yet so I pushed it another week. Well I still have some white pistils and am thinking gonna let it ride a little bit longer. Just giving it a good flush right now.
Likes
4
Share
Finally the sun comes out. I think we are already in the swell. It looks very tasty.
Likes
11
Share
Soo, I think I can start to call it the first week of flower. #2 definitely is showing a few white pistols, #1 is just starting her first set and I'm pretty sure #3 will shoot them out any day! Also seems that removing the lowest two side branches of #1 was a huge success! She basically is the same hight as the others BUT I LST her a bit to expose the smallest side branches out of the three to more light! Also, I put a little elevation for her, so they stay the same high. #3 is doing #3 things and continues to grow rapidly. Topping her was the right move I think. I'm quite new to autoflowers (I mean pretty much in general but I had one random regular seed run before this but that's it) so I hope, I didn't call it too early but I'm positive:) Also my new microscope and the Blumat drip irrigation system finally arrived. I heard it can be a bit tricky to get it running but once it runs, it should run like a charm. Very very excited for this since I'm planning on going living soil in the future, which should fit very well together. Before installing the system, I removed the first set of true leaves of #1 and buried the wounds in soil. I hope she will build roots there. With #2 I took scissors and scratched up the main stem and filled it up with soil. As well I hope for more root growth. #3 just got a little bit more soil without any extras because of the topping. After doing all that, I watered with the BioEnhancer. I took 0,5g/l and around 1,5l in total. Quite a lot of update for just one day haha. Flowerpower baby! Didn't really have the time for further updates besides pictures. I did defoliate all 3 a little bit and keep fine tuning the Blumat. I think it's working quite well so far. #3 has some little spots looking different but nothing major I feel. I'm more worried about #2. Her tips start to yellow up a little. I hope it's because she grew too fast into the lights and now where I pulled lights back up to 35cm, she will be fine again
Likes
7
Share
SST 7g of alfalfa per 5l , foliar and soil drench , followed by a kelp foliar next day eyeing the dosage as it’s like 0.03 for my foliar spray bottle 🙄🙈 probably curling up because of that . Also tied down some fan leaves and did few chop and drops through out the last week also was topped at some point 😂 forgotten when This week i will foliar with SST alfalfa & corn & kelp Rest for the soil drench I will mix with super8 tea
Likes
5
Share
Likes
10
Share
Day 33-13/01/22 they look really well I’m just trying to make space in my other tent so I can move half of them out and be more organised but I think this is the last week of veg!!!
Likes
10
Share
Set up a second 3x3 tent and put GGs in one tent, BBs in the second. Alternating watering and nutrients every 48 hours. PH 6.3 for both.
Likes
39
Share
In realtà ho coltivato 2 semi di questa pianta una l'ho raccolta e seccata mentre un altra è ancora in flush e verrà raccolta tra 5-6 giorni. I fenotipi sono quasi identici e predilige un odore di gas e og! L'effetto è devastante molto narcotica e a breve pubblichero qualche foto di qualche estrazione a freddo! Spero che piacciano a qualcuno i miei lavori e che qualcuno di voi si possa ispirare a tutto questo. Ringrazio ogni singola persona che è passata di qui a lasciare il suo like o commento e ricordo a tutti voi che potete trovarmi anche su Instagram 😘
Likes
9
Share
Harvest day 69 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
8
Share
@Rich2083
Follow
Coming along nicely now, some weight starting to be added to the buds. Leaves are quite frosty. Smells very sweet like candy.
Likes
21
Share
Hello. What a change with her growth this week, she is exploding. My Gelat.OG x2 are struggling to keep up with her although I germinated them at the same day. I will clean out her solution sometime this week and give her fresh nutes. I also decided to keep this plant along with my Gelat.OG and Green Gelato all in this same tent sharing 2 x 200W COB/CREE LED lights. Indoor temp runs about 79-81F.
Likes
5
Share
@CreoWeed
Follow
Hello nice people! This week number 6 went pretty good... Colas are building up and bringing out gorgeous colours as you can see in the pictures, purple mixed with pink and orange makes this plant the most beautiful I ever grown. The smell started very softly and it had a kind of pine arome, sublime. I've started giving her some Bloombastic and will keep doing so for the whole week. Stretching seems over and she kept a quite compact size, at 62 centimeters. That's all lads, I cannot wait to update the next weeks of this marvelous plant. Ah, I also just harvested and rated my other diary, come and have a look if you have done it yet! Stay tuned and stay high peeps!
Likes
9
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
9
Share
Als ich dachte, ich hätte noch Zeit, hab ich mich komplett verschätzt und damit warscheinlich auch den ersten richtigen Growfehler gemacht. Die Pflanze ist viel zu hoch gewachsen ... was meint Ihr? Was kann ich das nächste mal anders machen? 😞
Processing
Likes
12
Share
Likes
13
Share
01-11-2021: Good afternoon everyone... here we are again. My Bruce Banger will be ready in a week so I thought... I can probably germinate some seeds. I still have a lot of them (thanks to zamnesia) Every now and then I also post a report on Growdiaries and since you can only enter a competition there by using only one Strain I decided to put a round of Wedding Cake. I wanted to grow this variety when I still got my seeds from seedstockers, but found it too expensive at the time. Now I had two fish vouchers from zamnesia, each one good for 5 Wedding Cake Auto seeds. I didn't really like AFs per se (although I enjoy the result every day) so I called them and asked if I couldn't get Photos instead of Autoflowers... That was no problem at all, so I now have 10 have seeds. I have not yet found a method of germination on Hydro that works well for me, so we're going to do it in the most reliable way for me... old-fashioned in Cocos plugs. I let it fill itself with acidified (PH5.9) water and then provided each plug with a seed. I now put this under a 60W purple LED lamp that I still had from my very first cultivation attempt. Once they are up (I'm guessing/hope with a week) these will go into my budget system to grow there under 480W LM301H panels for a few weeks but with only 12 hours of light. The idea is to move these to the large closet as soon as they are about 4 weeks old, but that is not necessarily a requirement because you can also remove the lamps from that loft and move them to this room. That depends a bit on the size. What I'm going to test this round is how good/bad 12/12 from seed is doing in Hydro. Since most feeding schedules with hydro assume that you only pre-grow 1 week, I thought I might as well rule out that one week. In addition, from the moment the roots emerge from under the net pots, I want to increase the EC to 1.5 fairly quickly. I like small stocky plants without having to scrog. Maybe I'll top and maybe even mainline, but that depends entirely on the development of the ladies. In any case, there will be no feeding computer for the first few weeks (a bluelab Guardian) and as growth food they are given Hy-Pro Hydro A/B with Calmag (4-4-1 ratio). I expect very low temperatures in space so it won't be a banger. I have the impression that a correct root temperature compensates to some extent. I'm still looking for a way to transport the ladies in the right way (or I have to find a way to be able to use the same net pots in both systems). But that is of later concern. Since I only have 1 pre-growth room and 1 flowering room, I will put these ladies in a kitchen cupboard for the next week. The Bruce Banger goes on Sunday and then I can put them in there. The idea is to continue breeding on 12/12 from now on. After six weeks, new seeds will always germinate and no more than 5 at a time. I now make a round with originally 15 ladies, 3 of them were left behind in such a way that I took them out (to prevent rot) with the probable cause of too little light. 5 Planting will probably yield a little less, but hey, I can't finish it otherwise. And now my friends are very happy with my clearing days but of course that is not what I grow for. In addition, it also hurts a bit to give away 3-4 ounces after so many months of work. Just a summary of the materials used for the enthusiasts.... Lighting: 3x Meiju LED Samsung LM301H 240W with Jisun Drivers. Heating: Juwel 200W aquarium heater Nutrition Growth: Hy-Pro Hydro A/B, Ata CalMag. Nutrition Bloom: Atami ATA AWA Max, Ata CalMag, Plagron Green Sensation Containers: 5x 11 liters Bato (2 liters of nutrient solution per container) 36 liter reservoir Extraction: G-Tools 400 M3 adjustable extractor and PK2601 Filter Measuring equipment: Bluelab Guardian EC/PH/Temp Meter, Ali temp/lv meter Irrigation: Pressure compensated drippers 7.6 L/H Disease Prevention: H2O2 50% Silver Stabilized