very well, brother gardeners! these little girls go on their way more and more shiny and full of resin stay tuned for the harvest 🤟🤟🤟🤟🤟🤟🤟🤟

Week 6! Plants are green and healthy. They range from 15”-25”.

those nugs are getting bigger and bigger each day. They‘re just soaking up the fertilzers. We have to water them every second day 2l per plant

I BROKE THE MAIN STEM but she's recovering. She won't be as big as she could've been but it is what it is. FF feeding

Day 85 Day 50 Flower Friday 17/05/24 She seems to have exploded since I sorted the temps. The tops seem to be swelling nicely , and the smell is soooo sweet and dreamy with a kick of blueberry. Last Feed today!! Before water off then flush week. Day 87 Day 52 Flower 19/05/24 - Sunday. Water today with calmag Wow, kicking out buds definitely seeing her final push 💪👌 Buds swelling, beaming with trichomes, and absolutely smells phenomenal, like a very sweet blueberry candy it's insane. Starting to mature pistils, seeing about 50/50 cloudy too clear trichomes. This will be her last feed Day 91 Day 56 flower 23/05/24 The smell is getting intense, blueberry sweetness with candy shop vibes it's lush. She is still swelling and throwing a last hooray. End of week today. Big Flush week next week.

How do you produce electricity with living plants? By using the natural processes that already occur. In short: the plant produces organic matter via photosynthesis. Only part of this organic matter is then used for its own growth. The rest (40% of carbon capture) is excreted via the roots. Around the roots, bacteria feed on the organic matter and they release electrons. If you’re able to harvest the electrons into an electrode, you can couple the first electrode to a counter-electrode and build an electrical circuit, like in a battery. The electrons flow back into the natural system via the counter-electrode, so it’s completely circular. 0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Magnesium (Mg) is a chemical element classified as a light, silvery-white, alkaline earth metal, and it is the lightest structural metal. Magnesium is a central component of the chlorophyll molecule, the pigment responsible for the green color in plants and vital for photosynthesis, where plants convert light energy into chemical energy. The photoelectric effect of 285 nanometers (nm) ultraviolet (UV) light on a metal surface causes electrons to be ejected with a maximum kinetic energy of 1.40 electron volts (eV). *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond. A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. The optimal pH for nitrification is between 7.5 and 8.6. Nitrification is the process of oxidizing ammonia to nitrate and nitrite.

Hi Growmies, I feel I had a root issue, may have even been root rod. So as I saw a few of the very deeply submerged roots turning brownish and decay, I decided to generously cut away the affected areas and cleaned everything with hydrogen peroxide as good as I could and then properly rinsed the whole system. It seems, however, like she has started a whole new set of roots that started to submerge after I started feeding the orca from plant success (can be seen in the video below). Can highly recommend this product! She has also not show any signs of stress due the suspected root issues. Other than that she is a super pretty indica lady :) almost crazy how symmetrical she is. I have trained all main colas horizontally until the canopy had evenly opened up. Now I will let her grow towards the scrog and depending on her stretch, I will flip her at some point towards the middle or end of next week. Here is the code that’ll give you 20% in Zamnesia‘s online store, just input ZAMMIGD2023 at checkout. Thanks for stepping by and until next week!

Viel passiert! habe immer mal Blätter entfernt, immer ein paar,hat Sie gut ausgehalten.jetzt merke ich aber ,das ein Netz besser gewesen wäre,ich habe Angst,das die Äste brechen,die Knospen werden immer größer und schwerer, habe versucht mit Stäben zu stabilisieren, schwierig da zu viele Wurzeln da sind,die dann zerstört werden.Ich muss abwarten und hoffen dass keiner knickt. Blätter ober verbrennen langsam,das liegt am Dünger, ist aber nicht weiter schlimm, lass sie dran bis zu Ende. , Ich dünge 3/4 nach plan. jetzt noch ungefähr 4 Wochen. Nichts mehr wird gemacht,nur noch 3 Wochen gießen und spülen. Jetzt ist Geduld gefragt 🍀🍀🍀 jedesmal wenn ich davor stehe,kann ich's nicht glauben dass es eine einzige Pflanze ist einfach traumhaft schön,und unglaublich gut riechend

Random bagseed I found, was my first plant. Even though I messed up a lot and this plant didn't turn out as I had hoped, it was an invaluable learning experience and I look forward to using what I learned to make my future plants greater. Wet Trimmed and placed in jars in the mini-fridge to dry.

FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

This lady’s on the end ! Only water starts tomorrow! I’ll flush it hard to get a smooooooth smoke !

Day one of flower for the London Pound Cake and Purple Shah. I moved the Blueberry Muffin into another veg tent for a week or two. They’re early finishers so when I move them back everything should harvest around a similar timeline. Fed them all with an Organic Alf Alfa seed sprout fermentation. The triacantanol in the Alf Alfa makes these things go crazy if you don’t overdo it. Add some coconut water and aloe and youve got yourself organic plant steroids. The growth rate will cause you to have an increased need for ca mg and nutrients which in organics may not be readily available. Top dress or feed ahead of the curve.

Nun wurde die 2/3 Pflanzen geerntet, die Shiskaberry war an Blütetag 66 soweit und trocknet nun im Kühlschrank

Everything is going fine can wait too see some more fan leaves come out

9/22 - Since all the ladies are now in flower it was time to adjust the temp and humidity in the 4x5 auto tent. I like to keep it at about 80°F & 50% humidity during lights on. With 70°F & 45% humidity during lights off (approximately). To accomplish this, I added a programmable dehumidifier and oscillating tower heater. 9/25 - Top dressed all with Roots Organics Seabird Guano, and Elemental. I also did a 24 hour brew on some compost tea. Fed that to them as well. They are really fattening up now and are covered in frosty trichomes. So far, one of them has a very deep purple while the other three remain a beautiful lavender color. Her smell is very potent. She smells like a grape SweetTart (remember those?).

A lot going on this week!! Feeding 3 quarts every Sunday and Wednesday at this point. I did a light defoliation on Monday and did a more thorough defoliation on Friday! I opened up a lot of bud sights and it shows in the pics from late in the week!! I just turned the fan and carbon filter on. Temps are currently holding at 73-74F and the humidity is between 43-45%. I'm very happy with that! I hope to keep them both happy!! Enjoy!

This is the week of thanksgiving. Due to me being gone, my heat was a little high around 89 and got higher as the day got brighter. I messed up and think I have caused Northern lights to have heat stress on the roots. I'm hoping that she'll bounce back in a week or two. Resolution is crappy on my video and I apologize for that.

Going into 48hr darkness at day 60, plants are sticky asf very strong sweet smells looking fwd smoke testing all 3 phenos.

What can I say except I'm shocked at these @tastebudz genetics, she's exploded out of no where in this past week! I can see her fattening up swell 👌, see you next week and remember happy growing and stay green ✌️ 💚 👌

Bene la prossima settimana farò le piegature dei nuovi rami secondari. Il tempo nell'ultimo mese è stato veramente caldo.. temperature continue di 35+ gradi. Faccio i complimenti a questa varietà per riuscire comunque a resistere.