Day 83: After being in the dark for like 4-7 days, they where ready to harvest. All plants getting cut by the machine, big buds are cut by hand. I never weight wet buds because that doesnt make any sence. I will update soon on how much it is dry weight. My friend helped me with the harvest since it takes many hours of work. I have many buds that are as big or bigger as my hand. Quallity so far looks promising even thought there are shitty buds as well, but thats normal and oke. They have been cut freshly so I won't lose much weight when cutting. This will happen when cutting dry buds. The remaining small leafs on the wet buds will dry in with the buds and will be barely visible. Thanks @Fastbuds for sponsering the seeds. It was a really hard thought to make a diary about it while having more then 100 other strain plants. So both diaries look almost the same now. Ill hope you guys liked my grow and that we can go bigger in the future, so that i can make a , single strain,better and full diary about it. More info soon.

Meine Woche war sehr gut, ich habe um getopft nun ist sie nicht mehr in den Becher und hat ein bisschen mehr Platz um sich auszubreiten. Ich habe heute wieder enhancer benutzt auch hier habe ich wieder von den 1 g die vorgegeben sind ein wenig auf die Oberfläche gestreut und nach gegossen. Wenn Sie die gewisse Größe erreicht hat werde ich auch diese toppen und so weiter machen Ich denke sie sieht ziemlich gesund aus in den nächsten zwei Wochen bekommt sie noch mal eine Düngung ab der siebten Woche mache ich das wenn die Wachstumsphase mehr wie acht Wochen beträgt Auch diese wird von der neuen Lampe die ich als Unterstützung die sie auch bei meinen anderen Grow Report sehen können bestrahlt ich probier das einfach mal aus. Lg

Nice growth but it does look like this one is going to be a thirsty girl. She already wants some additional nitrogen. I topped every bud site on every plant, both indoors & outdoors.

todo va bien, esta semana han crecido, pero creo que se han detenido casi por completo, hice una ligera defoliación, intenté limpiar las partes inferiores debajo de la red, dejando las hojas que aún están verdes. nos vemos la semana que viene buen cultivo a todos MrBigBong 🍁🍁💪👽👍

I’m almost over the finish line with my first grow. From now, she’s on plain water ph 6.5. I’m paying closer attention to the trichomes, she’s very frosty but no sight of any ambers yet. The smell of the fullgas has changed to a lovely sweet candy . So Looking forward to smoking this guys.

Here we are in week six of flower and not a lot has happen this week other than the usual watering and letting her do her thing. Only trouble this week was updating GoPro had to try a few times. Other than that we got some rain in my home town and collected about 60 gallons that I'm going to use to finish the rest of the grow. Also, got my new AC Infinity CLOUDLINE T4, Quiet Inline Duct Fan System with Temperature and Humidity Controller, 4-Inch. I was really hoping this two plants would finish before the year ended, however, it looks like they got others plans. See you guys next week.

Really surprised with how everyone turned out! Everyone is starting to flower but Kayla definitely got the lead in terms of pistils and bud sites. These ladies still need to be LST every other day. Looking forward to an early harvest!

48hr after planting all popped up. All look healthy so far.. All 4 PKA going strong. 1 I is a little shorter bit looks healthy. Good week... happy with results so far.

1er semaine en 12/12 s'est bien passée.

Tbd

Seeds were left in water overnight to simulate an all night soaking rain. The next day they were direct sown .75" deep into moist soil. They were left outside and because of the 40° nights took 4 days to pop. The soil was premixed with 15ml of rock dust and top dressed with the above listed nutrient at the listed ml rate per gallon of soil. 35ml of coop poop and 21ml of blood meal were mixed together and top dressed in a ring around plants, when they popped.

🌸 The White OG – Week 2 Flower Strain: TheWhite OG by Seedsman Seeds Stage: 2nd Week Flower / Week 13 from Germination Grower: DogDoctor Pot: 30L Fabric Medium: PRO-MIX HP Mycorrhizae Lighting: FOG LED Controlled by: TrolMaster Environment: 🌿 🔆 Light Schedule: 11/13 (Light/Dark) 💧 pH: 6.0 ⚡ EC: 1.26 🌡️ Water Temp: 18.6°C ⸻ 💥 Let the Bloom Begin We’ve officially entered Week 2 of Flower—and you can see the shift. ✨ The canopy is full ✨ The stretch is slowing ✨ And the first signs of flowers are popping up! Tiny clusters forming, her energy turning inward to begin building her crown. This is a foundational moment. What we do now will shape the rest of her flowering cycle. And for White OG, it’s looking like she’s going to be a big mama, just as we’d hoped. 🌿 ⸻ Feeding: The Aptus Clean Program with Breakout Powder This week’s feeding is a carefully balanced clean recipe—precision, not excess. 💧 Order of Mix 1. Regulator – Strength and cell structure 2. System Clean – Sanitation and oxygen boost 3. RO Water Conditioner – Unlocks nutrient uptake 4. All-in-One Liquid – Balanced base nutrients 5. Breakout Powder – The flower kickstarter 🌸 Why Breakout Now? Week 2 of flower is when we want to nudge the girl gently into full reproductive mode. Breakout powder provides the phosphorus and potassium bump needed to stimulate early bud formation and drive more focused energy into flower sites. Not too early. Not too late. This timing is just right. 🧠 ⸻ 📈 Metrics That Matter • Final pH after mix: 6.0 – ideal absorption • EC: 1.26 – strong but not heavy • Water Temp: 18.6°C – slightly cool, but within range This is a recipe that’s been tried, tested, and it’s clearly working. Her leaves are loving it, and her roots are thriving. ⸻ 🌿 Canopy Goals She’s taking to the Scrog beautifully—spreading, reaching, stacking. You can feel her momentum building. The defoliation we did earlier paid off. She’s getting light where she needs it and airflow is perfect. You can already feel her presence. She’s not just growing—she’s preparing for bloom with intention. ⸻ ❤️ Thank You to the Dream Team • Seedsman Seeds – for giving us these genetics to explore • Aptus Holland – for their clean and powerful feeding philosophy • FOG LEDs & TrolMaster – for total environmental control • GrowDiaries – for the platform to share, learn, connect • To the community—friends, haters, lovers, fellow growers—you are all part of the rhythm • And of course, to Instagram, where we keep the vibes flowing daily 🌈 👉 Come join the journey at [@DogDoctorOfficial] 🎉 Don’t miss the Dognabis Cup - 1st Edition now open! ⸻ 🌙 Final Thoughts This week, we don’t rush her—we guide her. White OG is stepping into her flower phase with grace and strength. The roots are fed, the canopy is full, and the energy is shifting. One week closer to the magic. Let’s trust the process, respect the plant, and enjoy the ride. 🚀 With Growers Love, DogDoctor 🐾💚 As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚

Hello Diary. The first week of vegetation is over. The plants thrive nicely, look healthy and satisfied. Watermelon grew 10 cm in the first week of vegetation. In addition to the nutrients that I mixed into the soil at planting, I started adding BioBizz’s Root-Juice. I regulate the humidity with a humidifier, so the humidity varies between 50% and 60%. Along with Watermelon on the “farm” are two Purple Punch Auto, who keep him company, with one Purple Punch not sprouting right away so I had to repeat the germination. Let’s see what the first week looked like. 27/01/2021 - Day 1. Official first day of vegetation. 29/01/2021 - Day 3. Watering. I prepared 4 liters of water but each plant got about 1 liter. p.H. I regulated with Plagron’s Lemon Kick at 6.2. and added 4ml / lit Root-Juice from BioBizz. Temp / Humidity on the farm - 22.9 degrees and 50% humidity. 02/02/2021 - Day 7. Photographing and watering. After the photo shoot, I watered the plants, each getting about 1.5 lit. This time I didn't add any extras I just adjusted the p.H to 6.3. and the water temperature was 20.2 degrees. I also measured the height of the plants and Watermelon grew 10 cm. That’s it for this week, thank you all for your support and likes. See you soon.

As of day 14, the Blackberry Kush is still exhibiting it's abnormal leaf growth. I've only ever seen this on another genetically purple strain, so I am curious if there is a connection. If anyone has seen similar issues in their own plants let me know! It's growth hasn't been too bad, and I am sure it's going to continue to take off over the next week! I usually top my plants between day 14 and 21, so i am hoping it is growing vigorously enough to prevent any stunting. I haven't seen any adverse effects from temporarily switching to my plentiful dry cal-mag, so I am happy about that so far! I am still adding a similar EC worth of Cal mag (.5) so it's good to have dialed in a rough equivalent. I hope everyone is staying safe, and happy growing! 👍🌱 Day 15: the leaf growth continues to be very screwy, and even if it's at least partially a genetic issue I continue to triple check all my practices and parameters. The PH drifts up mildly in my reservoirs between cleaning/remixing of nutrients, but it is going from roughly a 5.8 up to a 6.2 (at worst) with no change in the EC/PPM. Between the lack of EC drift and lack of smell, I don't think there are any major bacterial issues. The outflow PH is also acceptable (5.8) and the outflow EC is around .2-.3 above inflow, which is also acceptable. I dug into the coco a little bit, and the medium is not oversaturated with water (it is always a bit "fluffy" with good drainage and never compacted) and the roots are white and healthy. With the healthy vigorous growth of the other Blackberry in the same conditions, it brings me back to this being at least partially a genetic issue. I looked through grow questions of other diaries for similar leaf issues, and it seemed that most were either blueberry or blackberry strains from a range of breeders. This could be purely a coincidence, but it does make me wonder. The grows with similar issues seemed to otherwise have no commonalities in how they were grown. I am going to keep trying my best with this plant regardless, so I hope it pulls through alright! Day 17: being very careful with my PH and keeping it a bit lower, to rule it out as a possible cause of the twisted leaves and less vigorous growth. I am keeping it between 5.5 and 6 for the time being to make sure there is no lock out of micro elements like boron. As per the comments, I am being more accurate be using a pH pen as opposed to drops which I may have misjudges. I topped the plant, which is definitely a risk! But I am hoping for some healthier leaves to come in, and the plant hasn't stunted so far! It has grown the number of nodes it should have for its age, it just not as filled in and lush as I would like it to be. Day 19: I have been monitoring PH especially carefully, taking a few measurements per day and keeping it between 5.6 and 5.8 (a little on the low side). The runoff is consistently under 6 as well. EC and other conditions have stayed where they should be as well. I reduced any PH drift by running the air pump for the res 24/7, instead of just for mixing and before fertigations to rule that out. But I haven't seen any overall improvements for the leaves so I am reverting back to my theory of a genetic issue with this particular plant. It's growing larger and it's stems are thickening, so I'm just going to keep it growing as well as I possibly can and see what it yields!

Dense bud all the way down. The +Speed auto can be chopped at 7 weeks but generally require 8-10 for best results. My environment is steady and temps are perfect. VPD was kept on point for the majority of the run and nutrients fed at just over half of what was stated on the bottle. The amount that can be grown in such a small area and in such a short space of time is unbelievable. Only one plant has been harvested at the moment so I will update the harvest week of the diary with the other two once they are ready.

This was an amazing firat grow and I’m not done yet love mainlining. Depending on how these dry and the yields come out I may just do lst and get about the same amount of yield out of the grow but I still have another week or so till I chop the others

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.