Likes
25
Share
@Dunk_Junk
Follow
This girl sure is taking her time. I hope that's because of the high Sativa content 😍 Because of this the buds are starting to grow long and pointed, I'm going to try the backbuilding technique to see if I can get these to fatten up. I snipped half a dozen places and left the rest. Also I've noticed her leaves are very dark green and very very shiny, glossy. I cannot remember growing another plant with leaves like this!
Likes
18
Share
May 31st Everything is looking good after the LST from last week, I said I was going to swap them into flower and I realized that I should wait another week or so as they will be going into a new home so to speak. Updates coming next week for that. Doesn't look like to many PH issues anymore or whatever was happening but the plants seem a bit happier now June 1st I Figured today would be a good day to do a bit of defoliation on these girls in order to get some more light down to the newer growth. I didn't take a ton off as you can see, but for the size of the plant I suppose it was a decent amount. I read somewhere that a general rule of thumb is only defoliate roughly 30% of the plant at most. I'm not to sure if it is true but I tried to stay within that general rule. June 2nd, I decided since I would have them in veg for at least a little while long I would top them again. After topping I gave them some water and nutrients. I know I said I would do straight water for the next one but I went for it anyways as it seems the flowering mixture may be giving it some deficiency's. So I gave them the recommended feeding for heavy veg growth. I gave about 3L to the bigger plant and around 2L to the smaller plant (as it was still a bit moist but it wasn't damp). My crappy soil tester was saying my soil was at around 8PH so I figured I would aim to feed around 6ph. With the small amount of runoff from the smaller plant I did A PH test and the PH seemed to be around the 4.5-5ph area. My liquid ph meter arrived broken so I am waiting for the new one, therefore I am using the general hydroponics liquid test kit. I presume my soil ph is lower then the water I have given seeing as it went from 6ph water to around 4.5. Next feeding I will aim to feed at 7PH. With the defoliation I just made sure that the tie downs were decently tight still and moved what I thought needed to be moved. June 3rd,4th Not a ton to update on. I didn't get any pictures for these 2 days. June 5th Some obvious problems going on with the bigger plant. I am guessing it is the PH issue but I am still unsure. The one browned leaf I accidentally squished in the tie down while I was low stress training it so it got a bit damaged. Other then that the plants are growing decent. Im not sure why I didn't have more pictures for today but I mainly took problems of the problem areas. June 6th Not much going on still. They are still just hanging out not doing to much. It was a busy work week so pictures in general were a bit lazy. I will try to get more for the upcoming weeks. Big news for next week!
Processing
Likes
4
Share
We start this report almost with finished vegetation period The 13 seeds Og Kiss It was a gift from a friend I thought it will be an auto, but in 4 weeks I understood its fem I think this can be one of the best trees* that I have seen I mean in indica, because I had bigger sativa plant than this one Enjoy people this is one of the best plants that I have seen Super strong and heavy
Likes
10
Share
@BombBuds
Follow
-Cotton Pad method - before putting them into cotton pads soak seeds in bottled drinking water - !!! DO NOT SOAK THE PADS !!! - just give them a few gentle sprays with a mist sprayer then put 2 seeds in 2 cotton pads like a sandwich and spray that sandwich again. - put cotton pad Sandwich in baggie with little opening for air circulation and spray into baggie one Last time - everything together in an dark medium warm spot and wait for about 24-48 hrs
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
13
Share
Plant is starting to bloom. It's 16 inches from soil to top of plant. The way it is lst'ed it is about 10 inches from soil. Hoping I caught my tds and ec being extremely high quick enough. We will see come harvest.
Likes
10
Share
Going well did some defoliating and going to do some more also added to my grows as well deffiecies still present need a ph pen to check everything may switch nutrients next grow as well
Likes
59
Share
Prima settimana di fioritura,tutto procede più che bene,,anche questi altri giorni si sta riprendendo ogni giorno di più. ..
Likes
6
Share
@Naujas
Follow
it grows perfectly, it hasn't received any food yet, only clean 6.3 ph water with biobizz heaven :)also starting today I start using more wires :)LST.
Likes
85
Share
Start of day 84 ...... January 1 2022 Start of week 12 ........ 58 DAYS INTO FLOWERING 😕 LOOKS LIKE THERE GONNA GO A LITTLE LONGER THEN EXPECTED ? 😕 ( HAPPY NEW YEARS😋 🎅 🎄) ( SMELLING GREAT ) !!!!!!! Check out the full grow video on latest weekly update Super Exceptional Growth Daily Still adjusting LST when needed and leaf tucking....... Water Only when needed but its drinking more every otherday and adjusting lights when needed...... Rain Water Only ....... ( DAY 26 AND BOTH NL 1 & NL 2 SHOWED PREFLOWERS ) ( DAY 49 AND RESIN PRODUCTION HAS STARTED ) ( DAY 57 , EQUIPMENT FAILURE , main FAN , over heated😡 tripped breaker , reset light timers , lost a DAY, REPLACED new Main Fan 😁 back up running 👌) ( DAY 70 DID ITS FINAL FLUSHING TODAY TO GET RID OF ANY BUILDUP ) ( DAY 77 AND IT SHOWS A SLIGHT DEFICIENCIE MAYBE A CAL/MAG GETTING CLOSE TO END OF LIFE ) IM ALSO DOING VERY LITTLE, SLIGHT DEFOLIATION ( DAY 89 AND ALL IS GOOD , THERE FATTING UP ) DAY 89 .....NL 1 SHOWS CLEAR TO MOSTLY CLOUDY RESIN HEADS , STILL AWAY TO GO ....... DAY 89 .....NL 2 SHOWS MOSTLY CLOUDY RESIN HEADS , JUST WAITING ON THE AMBER TO GET STARTED , GETTING CLOSE BUT MORE TIME NEEDED...... I hope you enjoy my growlog...
Likes
10
Share
She’s growing really well. We had two extremely hot days at 30°C, which caused some leaf curling, but overall the plant handled it just fine. The heat didn’t stress her much, thanks to the two CO₂ grow bags I have in place to help manage intense light and higher temperatures.
Likes
8
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Anesia Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Settimana strabiliante!!! Grazie a tutti per il supporto ❤️🍀🔥
Likes
2
Share
Likes
10
Share
@41310a
Follow
Cultivation was very easy in terms of vegetation and up to half of flowering, where I encountered difficulties and ended up postponing their harvest. drying Purple presented 220g wet and 39g dry. I can smell a fruity scent on it and I see a lot of resin. I'm happy with the result but I still want a 50g plant.
Likes
4
Share
@Diips
Follow
Week 6 allready! atleast 4 weeks left minimum 🌞✌️
Likes
5
Share
@Sativa763
Follow
Sooo another update : Week 4 This week starting with Mulch, using hay, first time for me. Plants Are looking very good and are growing Nice. Snapped a Branch on the Right one .. Sad. Very sad. Switch will be done at may 1st so in realtime we Are on day 45 of flower! Lets say they are still alive ✌️ See you soon Happy growing
Likes
10
Share
@Grishka
Follow
Trimmed a lot of fan leaves off the buds to get light to the lower ones . Probably should have done this sooner but I learned a lot . Also started to flush two of the more mature plants that seem to be a couple weeks ahead of the other two.
Likes
16
Share
Mind-expanding and pleasure-inducing, Hypno Seeds presents its autoflowering version of the famous Amnesia Haze, Hazenberg AM Auto. For lovers of Sativa, this quick-growing autoflower cannabis strain will definitely be a big hit. With its incredible earthy flavors and delightfully euphoric effects, like a cannabis mantra, this strain will have you saying its name over and over again. Tech Specs THC 16%-21% CBD 0.40% Flavor Cinnamon, Lime Tree, Patchouli, Sandalwood, Walnut Type 25% Indica / 75% Sativa Flowering 8-9 Weeks From Germination Height 70-130 Cm Effect Corporal, Energy, Extra Sensual, Happy, Sociable Genetics Amnesia Haze X Autoflowering --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34