Week 3 has come and gone and it was a sight to see!! All the pistills came in nice and strong. I have to get in there and defoliate every couple a days a bit. This will be the last week of defoliation. Once I can see the main bud sights I will do my final trim. Started reducing the Nitrogen as the stretch faze comes to an end and up the bloom ferts. I cant raise my light much more so I hope they stop stretching this week. Im excited to see the flowers grow into these pistills and watcch the calayx swell.

Greetings to all who follow the development of my blueberry. I am very pleased to see you. Comment. Like. A week passed in the normal mode, the head swells in order to strengthen the flowering. I used pesticides of the gibberlinic acid group.

8/17: I fed today and did a little training. They're "sardined in" pretty well, so I'm limited as to how much I can do, but I worked on a couple of #4's since they were already bushy, and supercropped my tallest auto, and a tall one that's either a #2 or a #3. 8/18: After seeing them beginning to flower, I have reached the conclusion that I have 4 different varieties of the FFT clones growing! There are definitely 4 x #10 There are definitely 5 x #4 There are probably 4 x #2, but maybe only 2 There are probably 2 x #3, but maybe really 4 The #3 in the outdoor garden was a seedling (my last FFT bean) grown outdoors and pathetic looking, so I'm not sure what it would have looked like when looking at the clones. The #2 in the outdoor garden was viciously attacked by hoppers and mites so it didn't have much foliage to compare with, and died this past weekend before budding up enough to compare with. 8/22: I fed them today, and started them on Beastie Bloomz. 8/23: They're doing great. Fattening every day. Not bad for 2 weeks of flower. That's it for week 6!

Videos explains it briefly how they look so on the environmental side I’ve only been monitoring RH and temps. They’ve been sitting at 55-60 RH and 80-82 F. I separated the 4 plants as they were now overlapping in the 2x2’ section. They were transplanted in 2 gallon pots last week and by the looks of the Beast at most 2 weeks and she will fill that pot no problemo. I need to get them to 5 gallons before switching to flower. It starts with good genetics I couldn’t be any happier with the Beast, still amazes me daily.

Flower starting to swell

Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.

End of week 5 - Night 41 Added a couple videos, one from the side of the buds and one from the back (LST) things are going well for this plant now, it may only be 15-18cm but its flowering stronger than my other plants. the smell is just getting more pure and strong every day :) and its getting frostier too :D so excited! I have to grab myself a magnifying glass of sorts on monday to try and estimate when harvest will be :o

10/19: I fed today. Only one plant has any signs of deficiency..an Orange Sherbet that needs more Mg than everybody else. Serious stink now! Wow..gonna have to order another carbon filter.. I shot a little video of the soil remediation amendments I'm using these days. This will be the first time I use the Coast of Maine Lobster Compost. I usually use a different brand with added biochar and mycorrhizae, but I wanted to see what all the fuss is about the efficacy of lobster compost. Recipe: About 50 gallons of soil, previously flushed with TPS Liquidsoil to re-establish the microbial population. 1 cu ft - Coast of Maine lobster compost 15 lbs - Earthworm castings 4.5 lbs - Microgrow granular inoculant 4 lbs - Bokashi 4 lbs - Dr Earth Veggie, Tomato, and Herb organic fertilizer 2 lbs. - Nectar for the Gods - One Shot granular fertilizer 2 lbs - granular humic acid plus molasses 1/2 lb - texas greensand 1/2 lb - azomite 1/2 lb - dolomite 10/20: Halle Berry(Blackberry A) is getting soooo fat..maybe 20" in circumference! I spotted another couple of nanners on the Strawberry Pie and decided to leave them to do their thing..might be some very interesting hybrids as a result. It occurs to me that it's almost time to start germinating the next batch of beans...👍 10/23: Fed them and rotated the edge plants. Switched to Cha Ching. 10/24: Halle Berry is foxtailing a bit ever since I upped the wattage in the tiny tent. She's fading nicely..I'll probably flush her towards the end of next week. I started germinating the next batch of beans today, so I'm gonna need these bitches to hurry the fuck up now.. 10/26: Fed them and rearranged a little bit. I dialed back the ONE, increased CaMg and Sweet & Sticky. I flushed Halle Berry with 8 gallons of warm water and LiquidSoil. She's ripe, but I'll let her go another few days.

Casey's Rollex OG has been making progress. I believe the pest problem has been resolved. I did a good defoliation on her today to open her up more. I plan to switch to flowering in a week. Everything is looking fairly good at the moment. Thank you Spider Farmer, and DutchFem Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

The girls are starting to wrap up their cycle. I have been watching the trichomes closely, and we are getting very close

I had a long week and a lot happened in the garden. The plants were growing too slow and their leaves were closing like they were trying to protect themselves, some of the leaves ends were dropping downwards, purple stems and I also had tecnical problems; the GoGro ( auto feeding equipment ) valve didn't work and I ended up with a flood twice, which brought a few freaking little flies, and the lights were disconnected for 7 hours on sunday morning by accident. To solve this issues I had help from the folks here and some research online, I raised my lights up because it was cooking the plants, i adjusted the ppm giving more food to stop the leaves tip dropping, got Calmeg for the purple stems, pest control spray, I fixed the valve a gave a pretty good cleaning with Clorox in the tent. There were good things too. I did fimming technic to make the plants shorter and to get a more even canopy to get more ligh to them and more flowers. The girls are doing great, they are 4 feet taller now. I learned more about how they work and how to take care of them thanks to some free online books and lots of youtube. It has been hard work with lots of hours of dedication. I'm loving it. Thanks people from here. Thanks GrowBoss.

Well I made the decision to remove the plastic cover of the greenhouse because these babies are HUGE. Never had a plant this tall, ever, especially an auto. I removed all the lighting and left them and the other hydro girls exposed to the natural elements. Most were barely showing any signs of flowering so I figured the natural lighting would be sufficient and promote flowering. All my lighting is IP65 rated waterproof so I'm still looking for another way to mount them to run during the day when light is scarce or on cloudy days etc. But not for any extra time compared to sunrise and sunset. Have been removing large fans from the bottom up, exposing lower nodes. Also have been adding support their extremely long branches or tieing them back to the main stalk loosely at a node with hemp rope. At this point I'm not at all dissapointed that these Devils haven't flowered sooner, I expected delayed flowering because of the high doses of Superthrive throughout most of vegetative life. I just hope theres enough time left in the season for them to finish! Had to add an extension on our fencing lol, but the neigbors seem cool 😎, its legal anyways. Will add official height and current pictures in a few hours.

6/4/2 goddamn I'm loving this plant. The underneath of the fan leaves turn a deep magenta. They will look so beautiful contrasting with the buds

Since i applied almost identical training to all of them, i will name them individually once.the flowers start formig and there is an actual difference haha.. Health is perfect, they enjoying food, water, ecosystem, everything seem to be on spot and i am not worried at all, just waiting for flowers :D I defoliated extremly so all the budsites are exposed to light and there is good airflow, i also lolipoped those branches i am sure wont make it till the end.. Much compliments on remo chemo and spliffs strawberry, i see them as winners here

Last 3 days till the chop. Getting put into 36 hours of darkness prior to harvest. Trichomes are where I want them to be.

I’m starting to see both the dosi & bride cakes nodes reaching taller everyday, more & more pistils are forming! No signs of deficiencies or pests. I will be keeping these ladies on the Jacks/ Autopot feed but the seedlings shown in the update video are going to be receiving the Athena program via hand watering which I’m very excited about!

Day 15: Cosmo is looking strong. No more top heavy look after a full day of full fan and a night's rest. First big feed: 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 2ml CALiMAgic, 1ml RapidStart, 1ml Floralicious Plus and 2.5ml Armor Si. RO water PH 6.0 Temp: 75º RH: 63% PPFD: 450 VPD: .53 kPa Day 16: Cosmo doing well. New leaf growth showing this morning. No water no feed. Temp: 76º RH: 61% PPFD: 475 AVG VPD: .46 kPa Day 17: Looking healthy and happy. Applied some LST this morning. Feed tomorrow. Temp 77º RH: 55 % PPFD: 500 AVG VPD: .6kPa Day 18: All is well the nursery. Fed 250ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 500 VPD: .44 kPa Day 19: Looking good. Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 20: Still looking good. New growth. Fed another 250ml RO water with 1ml RapidStart PH: 5.7 Tent Temp: 77º RH: 60% PPFD: 550 VPD: .44 kPa Day 21: End of Veg Week 3! Looking strong and healthy so far. Almost feeding/watering daily at this point, will up the solution volume and see if it will last a day or two longer. Fed 350ml-400ml of 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom, 1ml RapidStart, 2.5ml ArmorSi, 2ml CALiMAGic and 1ml Floralicious in RO water PH 6.2 PPM: 750 Solution Temp: 69º. Tent Temp: 77º RH: 60% PPFD: 500-550 AVG VPD: .44 kPa

Once again, this week starts where the former one ended. With the exception of all the cables you can see in the first picture. I dared to install a minimalized version of the Raspi control only controlling the self-built humidifier and one blower/fan combination. I was very pleased to see how easily the simple diffusor can hold optimum VPD as long as temperatures are high and humidity tends to fall below optimum VPD. A single 10 seconds evaporation can hold the level for about 2–3 minutes. I am not pleased to see the Monsanto blowers rather underperform. It’s impossible to reduce humidity or temperature with both running on full speed, while a lifting of the tent door will bring immediate changes. With the Raspi/Arduino success so far*, I am thinking about using old Power Mac fans which are WCM controllable and use 12 V. At least one to increase air intake, and maybe even the blowers. * It wasn’t any problem at all to have the Arduino collect CO2 and soil moisture data, so after some more cable manufacturing (aka helpless soldering), I could extend the Raspi control. I’m still uncertain about the camera module (@trelorny impressed me with his time lapse videos). I don’t want to put the hardware into the tent with its not so electronics friendly climate, already risking some rare outages of the temp/hum sensor. But the camera module cannot be placed far away. So maybe I’ll use the 3A model I own as a spare part as a camera driver. Any maybe, if it works, invest in a better camera module. Mine is generation 1. Oh, and the ladies! Gave them slightly fertilised water yesterday, and even it or the better VPD yesterday or a combination of both make me believe bud growth is a bit more visible today. The smell in the morning when I open the tent to release accumulated humidity is outstanding. They were already thirsty on day 57 again, so pure RO + a bit of tap water until it spilled out of their pot’s bottoms. Many fan leaves turning autumnally now, and the smallest Sherbet suffered a bit from over-fertilisation as I wrote. But it this stage I don’t go for leaf beauty anymore. Just another learning: Don’t use differently sized pots anymore. Hard to feed them individually this way. VPD was mostly in best range yesterday, and I have the feeling it really supports their bud growth. I added an "Evening time" option to my Raspi control that allows the humidity to sink a selected time before lights shut down. That made it possible to have humidity in best range for most of the night time too. They were even dry again on day 58 morning. Another time just water. The blowers cannot cope with the flowers’ smell anymore, and so sometimes my flat cannot hide who shares it with me. Day 60 presents me with a problem: I’ll leave on Friday for a few days. Considering the microscope pictures are not from the tops buds: Would you say it’s safe to give them another week? Problem solved on day 61. Only clean water from now on, and next week will be their last. You won’t see any new pictures for some days now. Me too … Something I wanted to share with you before I leave: I just finished to update my grow box control with a new PWM fan hat that keeps the Raspi cool, while at the same an infrared sensor can now measure real leaf and additional ambient temperature. Setup is much cleaner and more robust now, but I wish my flux would not make the solder stick to the tip of the machine instead of making it flow and stick at the tiny tiny spots I have to hit …