Likes
Comments
Share
She be coming back from the past at this rate she's not exactly been a perfect start but I thing in the end she will give abundant amount of tricomes
Likes
3
Share
Things are starting to be exciting. The SQ is a bit slower than the Fat Bananas, even so, it developed nicely this week. Planning to top it at the 6th node this time and give around 5-6 weeks of veg.
Likes
6
Share
@1Prinz
Follow
18.07 watering with 400ml - 400ml - 400 ml Blueberry got only water Trainwreck got Bloom, Top-max and Fish-Mix All the others got only Top-Max and Bloom. Search everyday for some spidermites or something else. On some days I find a few on blueberry and Biscotti. I remove the manually. 21.07 watering with 400 - 400 - 400 water. Again: blueberry only water All the others Top-Max and Bloom Trainerwechsel started to flower. The leaves of Blueberry and Biscotti started to get yellow. Also removed some leaves with were down in the shadow of the top strains of frosted guava.
Processing
Likes
80
Share
Finaly she is looking and getting better. Becaue of my low humidity I had to spray her with water each time 15 min before the light when out. As you can see it helped allot. She is a tough lady and this genetics with the Plagron line is golden. I am almost ready the flip it to 12/12. I will do it this saturday. She only had water this week because the bat mix soil has enough nutes for her as you can see.😃 Also I dimmed my 250 watts to 175 watts and hang the light higher and what a change. After I flip it to 12/12 I will go back to 250 watts and after 3 weeks of flower i will 10% more. And I wil lower the light too. Lets hope she gets some nice colas.😅
Likes
1
Share
Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself
Likes
188
Share
WEEK 3 FLOWERING = 28/4/2023 (DAY 15 FLO) ---> 4/5/2023 (DAY 21 FLO) [DAY 64 - 15° FLO] - 28/4/2023 ⚡ - TS1000: 40 cm distance / 100% dimmer = 150 watt; ⌛ - 12/12 light cycle; 🌡️ - 27° C - 50% RH during light / 23° C - 58% RH during night; 📑 - PH 5.9 - EC 2.3 in DWC; 🍔 - For the third week of 12/12 I decided to decrease N a little and increase P and K: Micro 2ml/l, Grow 1.8 ml/l, Bloom 2 ml/l; 💧 - Solution in DWC is getting warmer: 22° C; 🥅 - I'm using the second SCROG net to even out the canopy. I bent the topmost branches and spread the branches further towards the sides of the box. The branches are still flexible enough to bend without issues; 🌱 - No marks on leaves, the plant has a nice green color. There are at least 30 flowering sites popping out of the second SCROG net. As already said, it's my first time with photoperiod and I don't know what to expect in terms of stretch, I'll try to manage it as best I can. ↕️ 43cm; 🔜 - Bought and mounted my new 3x3 tent. Next time I'll use that with my 2 TS1000! [DAY 65 - 16° FLO] - 29/4/2023 🌡️ - 27° C - 55% RH during light / 23° C - 55% RH during night; 📑 - PH 5.8 - EC 2.3 in DWC; 💧 - Keeping an eye on the PH and EC values ​​I noticed that in this 50 liter configuration the EC is very stable while the PH slowly drops day after day. I manage it don't using PH down when I top up. In this way I bring the PH levels to 6.1 and need to correct it after 3 or 4 days; 🌱 - Look at the day 65, done? Now go to last week and look at day 60. In 5 days the plant has filled the box again, amazing! 🌸 - Pre-flowers are forming, between tomorrow and the day after the flowering sites will be full of white pistils. [DAY 66 - 17° FLO] - 30/4/2023 🌡️ - 26.5° C - 60% RH during light / 22.5° C - 57% RH during night; 📑 - PH 5.8 - EC 2.3 in DWC; ✂️ - Removed about 20 big fan leaves; 🌸 - Flowering sites are filling up with pistils. [DAY 67 - 18° FLO] - 1/5/2023 🌡️ - 26° C - 64% RH during light / 21.5° C - 60% RH during night; 📑 - PH 6 - EC 2.3 in DWC; 🌸 - Pistils everywhere! [DAY 68 - 19° FLO] - 2/5/2023 🌡️ - 26° C - 65% RH during light / 21° C - 65% RH during night; 📑 - PH 5.8 - EC 0.4 in DWC; 💧 - Flush for 24 hours, tomorrow she'll get full flower blend; 🌱 - Plant got 6 cm in the last 48 hours. [DAY 69 - 20° FLO] - 3/5/2023 🌡️ - 26° C - 65% RH during light / 21° C - 65% RH during night; 📑 - PH 5.8 - EC 2.4 in DWC; 🍔 - After 20 days, DWC change: 40 LT flower blend. Silic (1ml/l) + CalMag (1ml/l) + Micro (2ml/l) + Grow (1ml/l) + Bloom (3ml/l) + Fulvic (1ml/l) + Atazyme (3ml/l). Added about 100ml Ph down Flower by Canna, to be honest I don't think it's very effective, I had to use a lot to lower the PH and I hope it's stable. Only plus side: is just phosphoric acid and is very useful in this phase! 💧 - Not a single dead root at the bottom of the DWC, I hope the old roots are at least rotting away. On the bright side, they're not causing any problems; 🌱 - Plant looks pretty fine, perhaps there is some slight light burn. I'll check tomorrow and, if necessary, raise the lamp by a few centimetres. The branches are still quite flexible but I have no more space to bend them 😅 [DAY 70 - 21° FLO] - 4/5/2023 🌡️ - 27° C - 60% RH during light / 22° C - 65% RH during night; 📑 - PH 6 - EC 2.4 in DWC; 🌱 - Week 3 flowering is done. Big change this week! I don't know if I'm talking bullsh*t, but since the switch I have noticed an important change in the leaves, they seem much thinner and longer, typical of Sativa dominant plants, and I like it!
Likes
11
Share
The smell is very strong…14 days before harvest I’m not loving the humidity levels in the high 78% however the wind is very strong so they should help dry up the buds there’s a Full Moon on July 13th 4 days from now so I expect rain and I harvest a week after…soil is currently drying out….I’ve read that coco coir can flush within a week so I will start soon.
Likes
13
Share
@Canadian
Follow
I feel sorry for my plans this 2 weeks I haven't been able to look after them properly I've been working long shift with Christmas approaching there's no time for anything so I was pushing in a lot of nutrients into them and I caused a nutrients lockout .I have flush them out with just clean water at the right pH 6.5 and they are responding very well from now on I will continue to Baby them so they gave the best result possible within the circumstances of the plants. Thank you for reading I will continue to update have a happy grow
Likes
14
Share
@Cannabot
Follow
Plants taking nice shape at 2 months old.Not bad for about 9 hours a day from seed.I think the purple kushes are going to be my biggest yielders this season.Really impressed thus far.They seem to soak up lst ,responding positively in this method.Bonus is the purple pheno
Likes
3
Share
@ryu420
Follow
Flower smell like lemon a bite and sweet
Likes
13
Share
Seeing the plant starting to fade. I keep checking tricomes to see when its ready but not yet. Posted many pics of my tricomes using a digital microscope.
Processing
Likes
6
Share
She looks extremely healthy and happy let's see how she performs at the end,she's 100% organic grown without any chemicals from bottles. Starting to show the first pistils on August 24th
Likes
2
Share
Processing
Likes
16
Share
@MG2009
Follow
Good week here #1 is 10" and wider,took a clone. #2 is nice too she is 8.5" tall , both are healthy i will be flowering soon, I want both about 12" when I flower them. So maybe mid week flip? We see. Thank you for dropping in hope you have a great day🙏 1/08/19 Mid week both one and two are females, I will try to a good picture to show her pistils. #1 is 11.5" tall, and # 2 is 9.5" i anticipate flowering plants at start of week 8.
Likes
20
Share
Having trouble keeping humidity up as my grow is in the basement. Have home humidifier set to 35% but not enough even with a humidifier in the tent set to 60. Lights out isn’t an issue, it’s when lights on and the 6” exhaust is running that my temps are good but rh too low. UPDATE 12/21: The girls are back on track I fixed the whole home humidifier and added more humidifiers so my humidity is up to 50s. Plants are extremely healthy and the soil ecosystem is dreamy. Lots of worms at subsurface, cover crop is spreading and growing well and the plants are loving life.
Likes
27
Share
The Runtz has been an incredible strain to grow and she looks fantastic after the trim. I’ll update everything after she’s dried and I get to taste her briefly before the cure! 🙌🏼 Edit - Runtz is tasting incredible after a week dry. Now it’s in to the jars for curing! Thanks fir checking in.
Likes
24
Share
I found out that my ph was off too, so the plants look ok if we take all my f ups in count.
Likes
67
Share
@Canna96
Follow
Ripper seeds knocked it out of the fucking park with this one. I have no idea what she will yield, but I can tell you this entire plant is just stacked colas from top to bottom. With that being said, I do believe I low stressed trained her far too long and hurt her yield significantly. I did LST from day 30 until day 38, so I believe I lost out on far too much vertical growth during the stretch. I am going to adjust on my next grow and only LST the top 4 mains for about 2-3 days just to allow the bottom 4 mains to catch up. This Acid Dough absolutely reaks, and smells stronger than anything I have grown so far. The trichomes are almost ready, and she is only drinking plain water from my dehumidifier at this point. I am planning on harvesting her on Sunday, and I am working on a little 4th of July harvest video. This will also be my last (flowering) run with the Mars Hydro TS 1000 as I just received a couple new lights from Mars Hydro and ViparSpectra. The Mars Hydro TS1000 was a fucking champ, and I will still use her for vegging my autos. I will be running one auto under the Mars Hydro FC3000, and another auto under the ViparSpectra XS2000 from here on out. I am also running a timelapse of my Gorilla Girl from Sweet Seeds, and since I am only running 2 autos now, I actually have room for it! Unlike the Wedding Cheesecake, I am totally looking forward to trimming this Acid Dough Auto, and I believe it will take less than half the time. This is absolutely one I will be growing again! Thanks for stopping by all, be safe and Blaze On!!!
Processing
Likes
Comments
Share
@Fergie
Follow
Hey guys so here is number 6 looking a little warped . Going see how she takes over next few weeks and decide whether I going to keep or not .