Recommended
Likes
Comments
Share
This girl is coming along really nicely I'm really pleased with how she had turned out for my first ever grow. I have noticed this week she is starting to get a lot more of purple colour to her stem and branches she looks amazing. Her buds are are looking really frosty and are nicely dense I can't wait to try them! This week I have started the full flush by doing a full reservoir change to just water at ph 6.2 - 6.5 and will continue to add just water untill harvest. Happy growing 🌱
Likes
16
Share
Fast Buds White Widow is a strain that is easy to grow she can handle some stress if you have issues. She makes a massive bud on the main stem mine was 80 grams freshly trimmed!! She doesn't stretch much if your growing in a confined space. I'll repost what the total is dried and cured and smoke report as well. Smoke Report Update she's Earthy, Piney, with sweat citrus flavors, smooth pull, earthy, piney up front then then that sweat citrus when you exhale, really clean and smooth enjoyably smoke hits you quickly and then mellows out she has the ability to change your motivation level but not put you on the couch the rest of the day or night for the most part!!! 70% Indica 30% sativa. The total weight of the grow of 535 grams wet weight, when dried out to it was a total of 178 grams dry. That's a loss of 67% of the weight. She's a plant with thricomes that cover the fat, stinky, and sticky buds. I didn't have any problems with her. She can take some nuts for a autoflower as she never showed any signs of nutrition stress. Easy grow, strong plant, dense sticky buds, she smells sweat with a earthy note. I would recommend to any grower new grower you really can't mess her up, advanced grower she will give you a great harvest. Continue to grow your own medicine if you can or grow for someone you know that can't continue to make a difference in lives!!! Growdiaries is a great place to learn and connect with other like minded individuals!! Stay growing my friends!!! Thank you for looking at the diary!!!
Likes
7
Share
Likes
13
Share
@Prozak
Follow
the strain is really strong , low temperatures resist , 3 weeks around 12/16º graus and steell growing wel nice new colos between week 4/6 in flowering. really good strain to manipulate! 5 stars * * * * *
Likes
4
Share
Hello everyone, Been busy but I shoot a little video for yall to see, also if growing is something you guys intended to do, I suggest you guys get yourselves a Digital Microscope or a jewlers loop. I just got myself a Digital Microscope for under $20.00 on Walmart.com, I got me a cheap one to start with so I can learn how to use it properly. But for under $20.00 this one brings 8 led lights, a adjustable mount, comes with 3 different connection choices build in, magnifies from 50-1000x, can take pictures and also videos and my favorite part, it connects right to my mobile device, you download and install a Google app and your ready to go, ill work with it and add pictures next week... See you guys soon 👊👊👊
Likes
27
Share
@LSchnabel
Follow
This plant is really starting to pack on the weight now. Buds are getting dense and absolutely covered in frost. The smell is phenomenal and very very strong now. I had to take out a few fan leaves that started to cover up some bud. Doesn’t look like this one will be too hard to trim after the dry. Light is sitting around 950 PPFD so she is getting absolutely blasted to the max without adding in CO2. No signs of stress ever in this plant. I’m guessing roughly 1-2 weeks before she gets cut. Will start checking at the end of this week. Next feed will be just CalMag and Silica.
Likes
5
Share
@RastaRick
Follow
Tok off large fan leaves on day 24. Seeing preflower starting. Decided to try out a natural shape instead of doing LST. I hope this doesn't backfire... The blackberry gum on the right is getting big. I like how autopotamus has natural shape... But he also has much more light haha
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
9
Share
All looking healthy except for i found a couple of thrips defoliating can anyone recommend anything
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 56 Took some glamor pics with black background - not really for vanity (although there's a little) but for contrast. I see more of the lockout issue better in the pics this way. - on that note, the ph seems to be working as it's been two days since defoliation and knitting needle ph correction, and the progression is way slower than it was on the last leaves at 3rd day of identifying. So with that, room VPD of 1.07kpa seems stable enough with temps about 76F/65%RH/33%ILV I released the binds today to let her grow without them until they crowd each other too much and I need to restrain - so in a couple of days at max. Day 62 Transfer day. Although at first I didnt think I would be able to until Saturday, I got pots and plant saucers today, so I ended up going ahead and doing it. Started by calibrating/testing both meters. Double checked the soil mix from yesterday as the last time I used wood ash the ph rose the day after... however this time it was fully mixed to I wanted to know if there would be a higher ph - it was the same as yesterady - 5 reading avg of about 6.35 - the slurry of 1:1 soil and 7.7 ph water was tested at 6.3 also. Made about .75 gallon of 75/25 veg/bloom juice water at 500ppm feed water. Tried to ph read the soil in the pot and seen it go from 6.6 down to 6.35 (took video) in the dry soil, so I decided to use the 6.35 new soil reading and ph balanced the feed to that. Used the needles since it was 7 days since the last feed and I am using such a small amount. Poured over needles in 8 places and pulled each out to let water down. the vacuum pulls the water down when I lift the needles. Then I mixed 5tsp of Dynomyco to the 5 gallons of new soil and mixed really good. I placed a layer of perlite on the bottom of the 10 gallon pot and then layered in some soil. Then with the help of my wife we pulled the plant out of the pot and placed it in the 10 gallon. I place back in the tent and added about a quart of plain de-chlorinated water evenly over the new and older soil to help bind them. I reduced lights by 100ppfd to have about 505 and 500 at center colas and 430 lowest on outer ring with most at 450 and 470 highest. Soil to light is 35 inches and the plant is about 14 inches so about 21 inches from leaves to lights. I left the ring off today and will rebind as needed tomorrow after she rests. Today the leaves look wilted and limp. Also reduced humidity to 60% so 58 to 65% should be the range and the temps are 73F with the lights lower. PPFD was higher with the new growth - unbound and tucked in for better cola/light position, it reads 570 to 580 on outer colas and 590 at both center branches Day 57 Getting 1 more day out of free range growth before I tie her back against a ring. So in that time I decided to take a few vanity pics. Overall the ph block seems to have slowed or stopped and she's back to growing again. Will be thinking about flip at the end of this week or so. VPD same stats 76F/65%RH/33%ILV - ppfd right at max so I'll likely tie her off tomorrow. 605 600 in center and 580 to 590 at the outer ring. Day 58 VPD stats mostly steady again today - 76F/65%RH/33%ILV - ppfd was checked after LST, measured 600 at each center cola and the outer ring measured between 550 and 590 most at 580 So as I said, I did LST today to bind her more out while the 4 center 4 colas fill the middle. I had to bind to the pot base instead of the ring as the colas are still a little short to reach for binds at the ring just yet. There's a lot of space to fill and a few (about half) of the out colas are sideways for now. Had a break at the center cola when I tried to pull it back for bind. I knew to hold the branch at the node but forgot to do it here and heard a "snap" ... taped the crack and moved on - will monitor obviously Day 59 Did more light LST to ensure the branches are growing where I want. PPFD was mostly the same as yesterday only now there are more colas around 560 than 580 on the outer ring with the center colas at 610 and 590 (front cola was tied down to spread more away from the ring and fill center better. vpd same as past week or so 76F/65%RH/33%ILV Last feed was on day 54 and the soil still seems damp so I will check again tomorrow for the next day. (Day 61) The broken branch doesnt seem to have affected either side of the split as both sides seem to have grown a little with little to no wilt or drooping leaves. Im hoping it heals okay and doesnt delay flip to recover more; still monitoring. Day 60 Did some light LST today by releasing the lower binds to the pot and attached as couple to the outer ring now. So far I only have to bind a few as most are already holding where i want them to. Took the tape off the split and seen I didnt seel the gap closed when I taped it so now Im considering a drop of super glue to bind the branch back in hopes it grows onto the other side again. If not at least it would be more secure than it is now. And since it's a main split for 4 colas, I dont want too restrict it by binding at the split and potentially cutting off the nutrient pathways. ppfd after LST was 610 and 600 after more LST and the outer ring is still ranging 550 to 580 with more at 560 now. VPD same as I havent messing with any of the variables. 76F/65%RH/33%ILV Soil is a bit dry and it's been 5 days since the last feed flush, so I have about 3 gallons of tap burning of chlorine now for a feed tomorrow morning. Might still update again later if I find superglue... found some superglue - tried to take pictures but I cant hold, squeeze the applicator, and film with just two hands. So the idea gets through, I did both sides. On a side note I discovered a root popping out of the soil from the top. Covered it up but wasn't sure if I should be concerned. Day 61 VPD same as it's been for most of the last week - 74F/65%RH/33%ILV PPFD was recorded after I turn the plant a quarter turn for the smaller colas struggling to get over he ring's edge to have more light. Most colas at 580 with a couple at 600 and a couple more at 550 - center colas are hitting 615 and 620, but I have plancs to reduce in the next couple of days now On that note, the root growing out of the top tells me that she's hungry and needs more root space, even if that means growing through the top of the soil. So I plan to transplant to a 10 gallon and flip after the recovery. After reviewing more of NugBucket's journal I realized this is why he moves them when growing 16 colas. New pots should be here Friday so I should be able do it on Saturday. So I prepped soil (using more Happy frog with mycorrhizal fungi already growing in it for a few weeks) with de-chlorinated tap water Started by ph testing the soil and the water (4 readings on soil at 5.03 avg) - added about 1/2 cup total of wood ash to bring up the ph , mixed and tested again - added water at (about 7.7 ph) and tested again... last 5 readings in soil was 6.24,6.3,6.35,6.37,6.38 avg of 6.328 - covered and let rest until needed. Since I plan to transplant in a few days I felt it would be best to 'lightly' feed tomorrow, again on transplant day, and again 2 to 3 days later. Since my wife was taking pics at this time, I could only find this one to show the roots growing into the perlite then we planted it in the bigger pot. -------- (Day 62 root base picture from above) I have a hypothesis that says these are so short because I intentionally tried not to move the plant without the base stand to keep it from grinding these up and allowed them to grow in the last 2 weeks. This is that test picture/results. I like the idea of better/more drainage, but thinking I am doing more harm each time I hear those gravel pieces crunch as it cuts those and forces the plant to look somewhere else for root space. Notice how the small root lines have no finer pieces or laterals grow out from these - I believe that is because they are so new in growth and that the perlite chewed up the smaller laterals even with little to no movement over the last two weeks I would like to see a root ball experiment that exposed the roots throughout the grow but for now I can see these roots do grow into the base perlite and need to be handled carefully if you want them to grow more freely or with a standard pot size. As you can see Im not root bound but my plant thinks it is and is growing roots out the top.
Likes
8
Share
I had to top a few of these because they were hanging so far out, making lots of new space for bud sites I really like to bush/stretch out my plants making as many colas for flowers. Im seeing small pistils popping out here and there.
Processing
Likes
1
Share
Likes
11
Share
SPREADSHEET: Jack's vs. Advanced: https://docs.google.com/spreadsheets/d/1HtHnZOxMHtBK5DFQjpBun2lbhDxYVhI7lJaq4W6xbyk/edit?usp=sharing 9/26 - Day 35: Slight light burn - nothing major at all. Moved lights and used "Korona" a light PPFD app, and placed everything a little better. 9/28 - Day 37: All is good, the little shits are growing like crazy. Also, my first time using trellis netting and it's amazing. It's LST without the wires and I can do kind-of a ScRoG (not a literal one) by having the stems grow out horizontally for a period of time. Really cool!
Likes
10
Share
Day 78 from seed This week was a big learning curve as may have dodged a bullet and improved yield . Finally changed res after 3-4 weeks thinking I could get through to harvest I was wrong ppm was spiking to 2200 after multiple water top ups Figured plant wasn’t up taking nutes and had some sort of lockout , ph dropping aswell 5.5 ish Res was salty all over , was way over due , note to self add nutes gradually to reach desired ppm, I gave her what little nutes I had left ( could have more ) Settled around 1000 , seemed to uptake them in two days to settle around 750 , ph at recommended 6.3 , buds changed within a day ! Had to tie her up as she was leaning badly after res change, may invest in a pump to make things easier. Look to be ripening , putting on weight ; pistils browning :)
Likes
72
Share
@BodyByVio
Follow
Topped the plant in day 29 from seed. Nutrients concentration is dropping 10-20 PPM every 1-2 days. PH is drifting up every day, I have to drop the PH every 1 to 2 days. Light intensity for this week is at 46% ( Fluence Spydr 2i) . After toppling I dropped the light intensity to 36% for a day.
Likes
18
Share
week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress
Likes
4
Share
@Lazuli
Follow
So this plant grew during winter, i cant heat the room where the tent is so the only warmth was from my LEDs and dehumidifier, during summertime this strain finishes in around 10 weeks from seed, if u like strong smoke you should try her out
Likes
12
Share
Letzten 7 tage unglaublich an masse und höhe gewonnen echt atemberaubend das anzusehen ,hab das zelt gut voll bekommen mit wenig plants bis jetzt alles super. Habe heute meine neue Led lampe bekommen bin positiv begeistert.Habe 600watt durch eine 1200watt ausgetauscht.