Recommended
Likes
Comments
Share
@Warhead
Follow
🗓️95 3/28/21 🌖 🌻60 🔆 12/12 🌡️ 79° 🌁 58% ⚗️732 💧6.0 📝 one of my branches has gone polyploidy. 🗓️97 3/28/21 🌕 🌻62 🔆 12/12 🌡️ 80° 🌁 58% ⚗️567 💧6.2 📝 Added 1ml of PH⬇️ 🔆Light schedule 🌡️Air temp. 🌁Humidity 💧PH ⚗️TDS 🚰Water added 📏Height 📊Nutes added ♻️Reservoir change
Processing
Likes
35
Share
@Paulolo03
Follow
No more yellow leaves spreading problem, it was the lack of nutrients for sure ! Thanks for those who helped me ! :) Something to consider for my next grow: I decided to grow 10 plants to get a chance to have a decent harvest as it is my first time but it takes too much space, I barely have room to move myself inside the box and the plants have less light. I also think it is the reason it's too hot inside the box, when the plants were small and the outside temperatures the same as today, it was was less hot. Next time, I'll grow like 5 or 6 but making them bushy as hell !!
Likes
6
Share
Two flower on top it going to die ,why I don't know
Likes
3
Share
The little ones are developing well, unfortunately there are a few minor nutrient problems in the direction of Calmag with the Morello Cherries and also slight signs of this with the TerpyZ Punch. I counteracted this with a foliar spray. The pH value of the hydrosystem has unfortunately dropped a little to 5.5, which I have equalised with ph up from Plagron. The plants are currently getting light between 800-900 ppfd and as soon as the stretch starts, l'll increase this to 1000 ppfd. Both ladies are slowly starting to smell.
Likes
5
Share
Repotted into 20L pots. Accidentally snapped a stem while using plant bends but she will recover nicely so not to worry. Again not enough pictures/videos in early veg unfortunately. EC also upped slightly.
Processing
Likes
14
Share
Roots continue to grow the older roots are stained from the color of the solution. I also topped her. no problems this week. This is my first time trying the TOP technique. I topped her two days ago and am seeing good growth. I think the 5 gal bucket is better than the crappy Rainforest 66 reservoir I used in the first grow. I have gotten good at controlling the A.B.L.E. Grow Chamber's Air and humidity using different settings for the ventilation or humidifier. I currently have humidity at @48%. and temps go from 21 to 24 C.
Likes
70
Share
All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 63 She didnt grow much over night but she seems to have already took to her new digs with no further signs of stress past last night's droopy leaves that have since bounced back today. PH tested the top soil 6.38,6.45,6.42,6.4 for an avg of 6.4125 - I tried to take a couple from the original soil and the soil divide of old/new - the numbers run close to the same so Im satisfied. Placed the ring back on - Measured 11 inches from soil to bar, but I can work with that as it's still level and the branches run past it all the way around. I also tried to level it. I didnt feel the need to tie any of the branches this time as they are mostly going where I wanted them to. PPFD is still lower power at 2 ticks from high and center colas at 510 and 500 with the outering at 430 lowest and 470 at highest with most at about 455 VPD is okay with temps at 74F/64%RH/33%ILV Day 64 VPD and PPFD still mostly the same about 520 to 440 on ppfd from center to lowest outer ring and 74F/64%RH/33%ILV she seems to be likely the new set up and soil is still somewhat tacky - Plan to water in 2 days. I could water tomorrow, but I rather make the roots look for new space in the outer ring before just giving more for now. Day 65 VPD and ppfd mostly the same - 73F/64%RH/33%ILV with lights at 520 for the center colas and 430 for the lowest of the outer ring She's mostly filled the ring and close to 15 inches including the ring meaning I should be able to defoliate and flip this coming weekend. So I'll prep for that. It has been 3 days since transfer and last feed. Soil is still moist but not wet on the very top. I prepped tap water to burn chlorine tonight and will consider wetting her a little tomorrow. No more than a gallon of straight water for now, then again with reduced nutes a few days after that. Day 66 VPD same; 74F/64%RH/33%ILV PPFD after watering was 430 at lowest and 520 at highest - also moved the lights because I finally got the stand for the 10 gallon pot. Lights are now about 33 inches from soil and since the plant is about 15 inches high that makes the light about 18 inches from leaves to light. Watered with 1 gallon of 6.4ph de-chlorinated tap. Used a spreader water can and spray bottle. I used the whole gallon and there was no run off. Day 67 VPD okay at 74F/65%RH/33%ILV took 4 ph tests in the top soil got 6.64, 6.65, 6.67, and 6.54 for an avg of 6.625 (actually higher than I wanted but still well with-in range of acceptable. waited until later in the day and defoliated lower leaves - mostly the larf leaves under the ring. Also used HST and LST to break a few branches and tie others. The goal is to set a more level top before flip. But one that can be secured with the ring later if needed. PPFD now has 600 as highest and 430 as lowest she's spread quite far from center to outer rings now. Overall she looks close to flip and I think I might be able to at the start of week 10 day 70. Day 68 VPD was normal at 74F/65%RH/33%ILV - PPFD ranged from 400 to 600 with most around 500 She seems to be recovered mostly form the HST/LST/Defoliation - or at least is accepting the training as the colas that were bent are now pointing up. There are a few leaves showing stress and possible deficiency but all I can do is monitor and treat with my next feed if I see it spread more. Took measurements too - about 16inches tall with a diameter of about 22 by 22, so I am happy with this wing span and no scrOG Day 69 Normal stats with 74F/65%RH/33%ILV ppfd also the same as yesterday ranging from 400 to 600. Tomorrow will be 4 days since her last water feed - I plan to feed about 1 gallon of de-chlorinated tap water with about 50 ppm of each veg and bloom juice mix. I also plan to flip to 12/12 tomorrow. Schedule will be 3 hours later and earlier from current times. Decided to put her into a MarsHydro 24x48x71 tent and start giving UV/IR light treatments through flower. So that's the tent I also have a Bloom Plus XP2500 LED Grow Light - a set of Spider Farmer UVR40 40W UV & IR Supplemental Lighting Bars and I am using a iPower 6 Inch Smart Vent. I measured the distance from soil to lights and placed it back at 35 inches like it was with the ViparSpectra XS2000 in the other tent - I then dialed the lights down to the same ppfd as it was. I am giving her 30 minutes of UV light 1 hour before bed and then 15 minutes of IR after lights out and before lights on again - which is now 3 hours later.
Likes
25
Share
Great week, these lemon pies have gotten huge. Had to stop LST awhile ago because ran out of space . If all turns well they will be the biggest Autoflowers I've grown. The pheno type I have is definitely more Sativa leaning
Likes
37
Share
This one is a wrap… Hang Dry for as long as possible and well be testing later 🚀🚀🚀 GHL
Likes
13
Share
Bestva Quantum Board LM301B / Mr Hide seeds Semana de agua reposada únicamente. Están casi totalmente amarillas, lo que indica que se han lavado bien. Flores compactas, sanas, olorosas y pegajosas. Semana de cosecha 🤙🔥
Likes
4
Share
Começaram a cria os primeiros brotos, com um bom desenvolvimento, sem algum tipo de stress… vamos seguir com o sistema😉🤫
Likes
4
Share
@QixxGrows
Follow
Day15 - Day17: I had some difficulties to get the humidity right. It was either too high or fluctuating too much. I ended up getting a timer for the plug and running the humidifier 15mins every hour. To help with air flow, I have the main duct fan running 4 times a day for an hour. To ensure that there's airflow around the plant, I have a fan in the light as well as a smaller clip-on fan that runs during light hours. I'm not sure how the camera moved on day17... I only watered it mid-day. Day18: The timer on the humidifier and Duct Fan is now keeping the humidity in a good space. VPD now under control Day19: The Vivosun controller perfectly adapted the lighting schedule to an hour earlier, to ensure 6hrs of darkness. UInfortunately the RPi kept it's 04:00 schedule (makes sense). So I captured an hour of darkness. Adapted everything. Will have 18hrs again from Day20 onwards. Day20: In the next days I'll lift the camera higher for a better view of what's happening up top. My mesh-netting-dingsbums will arrive and I'll use this as a platform for the pi+camera. Day21: I'm not sure if I like this angle. I'll only keep it like this until she goes into veg-mode. It at least shows the new nodes growing from different perspective
Likes
101
Share
I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!
Likes
26
Share
2022-10-31 The Plant is now under 12/12 and iam courious how she stretches She gets watered every day with a weak feedingsolution like 900ppm so iam sure she stays happy. Beneficals are mixed into the solution growing easy and steady website for for my Fertilisers: https://greenbuzzliquids.com/en/shop/ Code: mrs_larimar Breeder Info: 👉Black Sugar is an indica dominant hybrid of Black Domina, L. A. OG and Critical. It has kept the medicinal properties of L. A OG, a good flowering rate on the Black Domina lineage, and the compact size of the classic Critical strain. With its small growth, the strain produces large yields of up to 600gr/m2 on bushy branches. The buds are very dense and stinky. Black Sugar has a high THC level. The variety has a fruity citrus aroma. Dense smoke gives the effect of relaxation and body buzz. Good for Smoking before going to bed. It can become one of your favorite Seedsman strain Genetics Black Domina x L.A OG x Critical Harvest 450 - 500 g/m² Flowering 50 - 55 days THC 20.0% CBD 1.0%
Likes
36
Share
watering with liquid karma, bud candy with a touch of molasses inbeween feeding ending the week adding some fox farm Cha Ching transitioning from beastie bloomz
Likes
8
Share
@Monkeyboy
Follow
So wer at day 87 and going strong, banana peel water as feed. I think I'm going to give it one more week before harvest. Definitely a 100 day seed. Smells amazing. So can not wait.