Likes
Comments
Share
@coolesrat
Follow
I got the purple pheno at last !! So glad actually... that it is actually changing colour and with so many more weeks left for it to continuously transition. Totally what I’m looking for in future breeding projects. Black amnesia haze fast: for its rooting and overall vigorous performance. Creating good yields each run And this one I’m still waiting to see how she goes! Way more grows in the future!
Likes
9
Share
@Medgrow93
Follow
Had mold at the very end so ended chopping then down early. Delicious smell. Smells like vomit or piss and gets stronger as they continue to cure.
Likes
37
Share
Edit: I came home from work after making my weekly log entry yesterday and I could smell my grow from my driveway... so I asked for help. THANK YOU OOZLEFINCH FOR THE HELP.. THIS IS WHY WE ASK FOR HELP... I left a question on here stating that my new canister wasn't working and asked for generic advise. He left an answer that pointed out the fact that my exhaust fan might be set waaaay to high... and it was! It turns out there's a limit to the amount of air that filter fan 'scrub', and my exhaust fan goes way over that limit even on 6 or 7.. I turned it down to 3 and the smell got better immediately. ☮️ Still on auto pilot at this point... I'm really close to harvest.. and I'm not even on day 60 😲. I created videos this weeks, they capture the plants in ways that a still picture just won't. My entire house stinks.. my neighbors are looking at my funny, and my wife thinks a family of skunks is hiding in our walls... I've never had this problem.. I even got a brand new carbon air scrubber and its not helping 🤣 Process/ Environment changes since last week: - To help preserve the terpenes I've been trying to lower my temperature, which is hard without an AC unit I'm not plugging in an ac just to grow some plants. I'm at 24- 26 degrees C (75 - 82 F). - I've been lowering my humidity accordingly to keep VPD in a good range - I lowered my lights closer to my plants, turning them up would just add to the heat. - I'm defoliating as much large fan leaves off as possible - My watering pH is at around 6.7 to 6.8.. I will not be flushing these plants - I rotate my plants every day to make sure I'm getting light to hit every node it can This week I'm pulling out the digital scope and doing the first trichome checks for these babies. The cheese auto is going to get the chop by the end of next week.. I hope you like the video I added of it.. it's the easiest plant I've ever grown and she's going to be FIRE. The blackberry auto is giving off a gas/berry smell and is very sticky to the touch. A beautiful triploid... my first and I hope to get many more. The Forbidden Runtz smells just like a zkittles does, it's bang on. Very dense very sticky buds. I almost tossed her during the seedling stage too due to her mutation. I'm glad I reconsidered ☮️ Thank you Fastbuds
Likes
8
Share
I had a lot of fun with this grow and can’t wait to taste the final product after dry and cure!
Likes
127
Share
@SwissKush
Follow
Day 8 - moved into DWC a. DWC is ready to go, with 400ppm of nutrients b. the growth we are seeing is very nice c. am still watering around the rocks a few times a day to promote root growth Day 9 - all is well a. plant is noticeably growing b. PH is sitting at 6.2, and not fluctuating - using dechlorinated water source Day 10 - she is growing a. nothing new to report b. utilizing humidity dome with small space for DWC to breathe, the humidity in my barn is a bit too low Day 11 - growth a. new leaves are forming b. one root has made it outside the basket Day 12 - roots in the pool a. we have a root in the pool! b. there will be many more to follow, the water level is just at the base of the basket Day 13 - you can depend on FastBuds a. just like clockwork, at 2 weeks there are 10+ roots reaching into the nutrient pool, FastBuds seeds ALWAYS germinate faster Day 14 - explosive growth a. roots are about 5cm into the pool, she is taking off b. love the shape of these initial leaves, the green hue is wonderful
Likes
17
Share
Que hay familia, actualizo la tercera semana de crecimiento de estas Runtz F1 automáticas de Zamnesia. Vemos que las 5 están en perfectas condiciones, tienen un buen color y van creciendo a buen ritmo. Empiezo por supuesto abonando una pequeña cantidad de la gama Agrobeta. La temperatura está 25 grados y la humedad anda entorno al 50%. Riego cada 48 horas y suelo pulverizar con agua para aumentar un poco la humedad ambiental. Hasta aquí es todo estas próximas semanas veremos cómo van avanzando. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Hasta aquí es todo, buenos humos 💨💨💨.
Likes
120
Share
Welcome back to another thrilling update on our Lego Ninja Tropical Tangie Run. Week 7 has been an exhilarating journey of rapid growth and breathtaking canopy development. Our Tangie is proving to be an extraordinary ninja superstar! Last week, we embarked on an exciting transplant adventure. Our fearless Tangie had outgrown her previous home, so we bravely transferred her to a spacious 25-liter fabric pot. With the assistance of Aptus Holland Mycor Mix, we ensured a smooth transition, providing her with beneficial mycorrhizal fungi. These underground helpers are like her very own ninja squad, supporting her root system and establishing a strong foundation. To continue supporting her growth and development, we incorporated the incredible Aptus All-in-One Pellets into the soil. These pellets act as potent ninja power capsules, packed with essential nutrients. Each watering session delivers the perfect dose of nourishment, fueling our Tangie's journey to greatness. She's thriving with optimal health and vitality. And let's not forget our loyal companions, the trusty Lego Ninja buddies. They have remained steadfast by our side throughout this green adventure, offering both moral support and an unwavering display of ninja vibes in the grow room. Who would have guessed that little plastic warriors could be such fantastic companions? After the successful transplant, it was time to introduce our Tangie to the art of scrogging. We skillfully installed a scrog net, creating a framework for her to weave her way through. This setup resembles a challenging ninja obstacle course, encouraging her to grow horizontally and maximize her bud production. It's truly remarkable to witness her impressive moves as she gracefully and sexily fills up the space. Of course, proper nutrition remains crucial for our Tangie's ninja training. Instead of using Aptus Holland Veg Watering Mix and All-in-One Liquid separately, we have now transitioned to solely relying on the pellets. These convenient premixed pellets integrated into the soil eliminate the need for additional liquid NPK. This simplification allows us to focus on other essential aspects of her training. To ensure she remains pest-free, we have been diligently conducting leaf picking sessions, which also serve as an opportunity to check for any unwanted visitors. So far, our Tangie has passed with flying colors, and her vibrant 9-fingered leaves are a fantastic sign of her overall health. As our Tangie continues her epic ninja journey, she basks in a PPFD of 600. These photons act as her loyal ninja training partners, stimulating robust photosynthesis and fostering explosive growth. With each photon absorbed, she becomes increasingly formidable, ready to take on any challenge that lies ahead. In summary, Week 7 has been an absolutely exhilarating chapter in our Lego Ninja Tropical Tangie Run. The successful transplant, the magic of Aptus products, the support of our Lego Ninja buddies, and the installation of the scrog net have all played vital roles in our Tangie's remarkable progress. We owe a tremendous SHOUT OUT to Aptus Holland, Dutch Passion, and Grow Diaries for their continued support and exceptional products for the love and for it all, without them nothing we see here wold be possible. Join us for the next update, where we will delve deeper into the fascinating world of ninja training techniques and witness the unfolding of our Tangie's extraordinary ninja powers. Until then, continue cultivating with joy, embrace the indomitable ninja spirit, and remember that every plant has the potential to become a botanical ninja superstar! As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
24
Share
@MaxMo8
Follow
Merry Christmas and happy 🎄 holiday 🎁 🎅
Likes
59
Share
@AsNoriu
Follow
Day 0. Look who is back ;))))) Most stupid run ever from all my stupidities;))))) Ex Green Tea bag and hopefully that girl will heal my ungrowers depression;)))) Suicide run, but I am ready ! My windows even look to west, so no direct sunlight for that girl, let's see !!! Soil from my ex green house( to green house it went after growing indoors, so third cycle for same Biobizz AllMix soil) All feed I showed, will be a punch of each to soil and then a bit mid veg and potash in mid flower Maybe will watch pH, still thinking ;)))) This grow dedicated only for this : https://growdiaries.woodroom.tel/giveaways/Tiny-Pot-Seedsman?utm_source=Grow+Diaries&utm_medium=Chat%26newsletter&utm_campaign=Best+Rarest+%26+Smallest+Pot&utm_id=Best+Rarest+%26+Smallest+Pot Never understood policy, why companies push growers into uncomfort to show off good strains, stupid no ? ;)))) Day 6. Still no movement, so i pop one more to the pot a bit aside from first one, its cold at home for growing for sure ;))) ill give a week from now and then rethink if nothing starts ... New Day 0. Seed has brownish root, either light pollution or pH. Didn't regulate pH, so most probably second... Still don't know what caused issue of first two attempts, bought pH +- and Ecothrive bacteria, just 4 months ago I gave everything away , even sent light to Germany recently .... now 15£ spent again .... :)))) that b$tch has to bring 10g or its a bust ;)))))))) Happy Growing !
Likes
9
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
38
Share
@TrueNorth
Follow
I am absolutely shocked at the bounce back these plants are making, luckily i went with some good genetics! Thank you humboldt! The ladies are fighting hard threw some tomatoes in there!
Likes
56
Share
Granddaddy plant in week 6 of flowering. She is in full bloom. Bugs Issue: There are some old caterpillar holes on leaves but I think bugs situation improved. The smell from plant dropped last week after first round of insecticide spray. Smell is like plant crying out in pain after being attack by bugs. I sprayed spinetoram one more time in the beginning of the week. Late in the week, I used a USB microscope to check. And there was a Protoss tank patrolling a leaf on plant 2. On the bigger plant, I just saw carcass of dead mites strewn around. Prepping plant 2 for an early harvest. I am always happy on harvest day. Trim her and let the pot dry out for a couple of days. And plan to spray my garden with third and last round of spinetoram. Next week, I am going back to microbes. Plant 1 is doing fine. She is bigger and handles pests better. Her flowering cola’s also smell nicer. Plant 1 phenotypes is much better than plant 2. And I removed some leaves. This past week, I fed both plants with half strength potassium based orchid fertilizer. Plant 2 shows slight tip burn. So, this is the feeding limit. Plant 1 leaves are nice and green. A few leave started to yellow but I am not bothered by that issue at late flowering stage. Next week I’ll just give plant 1 a dose of yogurt and start pre-harvest preparations. Trimming, flushing, and all that. Transplanted a clone to 25-liters basket. She started to put our pistil. This is one issue with Mycorrhiza. It over stimulate the root. And root tips put our too much cytokinin that signals flowering.
Likes
15
Share
@BruWeed
Follow
🍀27/06 - Empieza su quinta semana en Etapa de flora. 🍀Se encuentra perfecta sin ningún problema. 🍀Los cocos cada vez están más llenos de tricomas, se nota la genética gorilla. 🍀Cada vez requiere de más agua, antes era aprox cada dos días y ahora ya cada 1 día y medio esta pidiendo. 🍀Ya queda poco tiempo para la cosecha, igual se ve que le falta engorde a los cogollos. 🍀Subi dos videos para que se pueda apreciar mejor de como se encuentra. 🍀En estos dias subiré más imágenes de como viene. 🇦🇷🍀😶‍🌫️Podes seguirme en Insta Gram como @bruweed_arg 🇦🇷🍀😶‍🌫️
Likes
6
Share
@SAC87
Follow
Hey Growers. These girls look good and are Rolling along nicely. I honestly don’t have much to say as this is the easiest way Ive ever grown. Just Gaia Green top dressed every 2 weeks and water with cal mag for now. Happy Growing 🌱
Likes
5
Share
@Deli_Weed
Follow
Va increíble, a pesar de que tardo para entrar en floración, nunca detuvo su crecimiento y logré hacer un LST super chingon de modo que logre que todas las puntas estén masomenos a la misma altura, así todas recibirán bastante luz y crecerán muy bien 🤤 ya me las imaginó 💪🏻🌲
Likes
10
Share
@SgtDoofy
Follow
5/8 Watered both with plain PH'd water yesterday. Both of the plants are sucking up leaves. Trichomes are only really looking amber on the brown leaves, but otherwise milky. 5/10 Decided that these brown-leaved buds on Trainwreck were ready, so I tried a little bro-science and watered an hour before harvesting. Noticed there were some really nice green young buds intertwined, so I did my best to trim around to leave them for another week or so. No weight measurements yet, will wait till after trimming and before curing.
Likes
12
Share
Likes
10
Share
At the end of week 10 I have splited main stems and after 5-7days I'll harvest all of them. Before that plants will be in dark for 24 hours.