I am attempting to germinate Baked Bomb autoflower from Bomb seeds. Seed was lightly scuffed on ends, and placed in water. 🤞🏻everything goes well. Thank you Bomb seeds. 💣 🤜🏻🤛🏻🌱🌱🌱 Update: 1st seed failed, started a second one. Second seed sprouted then dampened off. Waiting on 3rd and last seed. I loosened the coco up to hopefully avoid any more issue. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

HELLO LADS WELCOME BACK TO MRS PEAKY'S GARDENS THESE BEAUTIFUL GEMSTONE CONTINUE TO GET FAT LIKE FAT COWS EVERYTHING SEEMS TO BE GOING RIGHT...

I’m letting this cherry cola literally do it’s own thing. I want everyone to see how little if done right it takes to grow an auto

Week 3 Light settings 18/6 on at 6.00am off 0.00am Light power= 46% 109w Radiator settings LIghts on Turn on if temp drops below 21.4c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19.1c Humidifier settings LIghts on Turn on if humidity drops below 59.9% Turn off if humidity goes above 60% LIghts off Turn on if humidity drops below 49.9% Turn off if humidity goes above 50% Extractor settings temperature 24c with 1c steps Humidity 62% with 2% steps Max speed 8 Min speed 1 VPD aim 0.5-0.9 Wednesday 8/2/23 Day 15 5.00pm Turn pots 90 deg Thursday 9/2/23 Day 16 8.30pm #2 Feed 1.5L Ec=1.06 Ph=6.4 Run 80ml Ec=3.35 Ph=5.7 Moved #2 to left #2 Height= 13CM Dist= 58CM DLI=18.8 Friday 10/2/23 Day 17 Did nothing #2 contemplated fiming Saturday 11/2/23 Day 18 8.00pm #2 moved to right and fim, should have 5 sets of nodes and then the fim part. #2 Height= 15CM Dist= 55CM DLI= 20.0 Extractor settings temperature 25c with 1c steps Humidity 62% with 2% steps Max speed 8 Min speed 1 Sunday 12/2/23 Day 19 4.30pm Leaf tuck all 3 #2 managed to expose a few nodes. 8.30pm removed humidifier and moved pots nearer centre of the tent. A bit more leaf tucking. Monday 13/2/23 Day 20 7.30pm #2 Feed 2L Ec=1.04 Ph=6.5 Run 50ml Ec=1.67 Ph=6.0 Tuesday 14/2/23 Day 21 #2 Height= 17CM Dist= 53CM DLI= 21.2 Round up for the week. Again it's been a fairly productive week with the grow. Didn't quite hit my VPD target but I wasn't far from it. There is enough foliage that I managed to remove the humidifier from the tent. #2 Tropicana Cookies FF is so far the best looking plant out the grow, she has grown extremely quickly and got some real big leaves. I attempted to Fim during the week to slow down the height a bit. Hopefully that has paid off. I'm thinking 1 more week before going 12/12. Power used for week Light (1.96+1.96+1.96+1.96+1.96+1.95+1.95)=13.7Kw Extractor (0.05+0.05+0.05+0.06+0.06+0.06+0.07)=0.4Kw Fans (0.31+0.30+0.30+0.30+0.3+0.31+0.39)=2.21Kw Humid (0.05+0.02+0.0+0.0+++)=0.07Kw Radiator (1.44+0.9+1.04+0.68+0.6+0.92+2.61)=8.19Kw Total for the week=24.57Kw Back in a week. Thanks for stopping by.

Nice colours

Day 18 Last day vegetation

Plantitas con 21 días de vida Días 20 solo se corto a todas un nudo de abajo y se les agrego los tutores.

Lowered the lights a good 8-10inches just because i realized i could get them closer without burning! Going for around 6-7 inches above canopy getting the temp in the high 70s low 80s om top canopy. All pheno are getting very unique and super resinous! I have a slight lnat problem going to spray this week when i get paid

For the Herbies contest - https://growdiaries.woodroom.tel/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Most of our autoflowering feminized strains are easy to grow. This one, however, is so easy to grow that we had to call it Easy Bud. Easy Bud is very similar to the autoflowering strain White Dwarf. THC: 12% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 30 - 80 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 110 cm Flowering: 5 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: White Indica x Ruderalis Type: Sa 15% In 55% Ru 30% Effect: Physical Climate: Mild —RQS EASY BUD GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, this one with a purple center, let's give her some days in and see what happens next.

se nota el solecito de dias atrás

Booommm! Llegó la hora tan esperada Farmers nuestras flores llenas de resina acabandose de formar, la verdad que estas genéticas ayudan mucho al desarollo del cultivo espero que os guste!! Un banco seguro y confiable para una locura de olores y terpenos!!💚

Follow my ig page @billybillycultivations

Que du plaisir avec Divine Og Kush !

SO UPDATE GANG!!!! Everything is going well so far, i stocked up on water for the girls nutrients are doing well but im going to upgrade them to the FOOP line of OMRI nutes other then that will keep everyone updated so far thanks!

Time to flush.

ถ่ายรูปไว้เมื่อวันที่13/10/2023

This beautiful plant keep growing very well and it started to produce a small amount of smell. This week i done the first topping on the main stem (as you can see in the video). I put a little bit of melted candle on the cut, that is why you can see some white things. I have done this to dont let in any bacterias or fungus. I transplanted it in the biggest pot that i had (16l)😍