Likes
Comments
Share
Since my last grow i have a problem with powdery mildew... So on veg. i just spray Sulfur and worked fine... (the smell is terrible....) now i am in flower and found the mildew again... i try a new mixture: dry common horsetail 1 onion 1 garlic cook that for around 1 hour. Then i flux it 1:5 with water. The smell is not so bad and just for 2 days. The leaf and flower not change color or smell. Hopefully it works! i will spray that now every week. Update: Flower Day 20 I start with the Top dressing on all Plants. They start to frost. The powdery mildew spreads :'( i dont know what else i can do?! i spray again!
Likes
25
Share
Welcome to my Purple Haze Autoflower Diary sponsored by MSNL & Xpert Nutrients. Days 36-48 weeks 6-7 of pre flower day 2-15 Plant is responding really well having 14hrs of light under my FC3000, and I've been using IR to give my fems extra flowering time & this has suited my Autoflowers really well. New nutrients i see huge improvements in all of my Autos not only from MSNL but crop wide. Root Zone increased 3x easily. Been organic/mineral you need to PH to 6.7 for soil. Are ideal 6-6.1 ph in-between coco/soil and you adjust as needed. Really happy with their push for my plants. She has put on a nice bit of height. Her smell is very new to my grows, as I've not grown a purple haze or smoked it in years. Fruity, like a soda, typical PH, can't wait to taste this girl. (She's currently just been taken out of my tent into dry room, I'll hang her in a few hours) FEEDINGS/DLI DLI is around 40-41 700-730 ppf over 14hrs with UV-A calculated in. Core NPK feeds have been only 1x every 5-7 days 450-550 ppm, next week I'll start adding there pk /bloom booster. Master root & everything else brings the general ppm per day 7-1000 with enzymes & master root having huge EC change to water. (Note? This is a different kind of EC, bacteria/enzymes & amino acids have a high EC input but aren't counted as core NPK feeds, which have been 450-500 "master bloom parts A+B) Thanks to MSNL & XPERT NUTRIENTS for their support & sponsorships. Much appreciated. Shout out to yall for stopping by. I look forward to seen your diaries. Either way thanks for dropping by.
Likes
33
Share
@DrDuhboto
Follow
Lots of fattening up happening this week. The smell in the room is wonderful. I am battling Humidity a little bit but nothing major. Not much else to report. I used the FFJ I made which smelled exactly like a few bud enhancers I have bought before.
Likes
29
Share
@EXZELENS
Follow
1st of November, HARVEST, D91 So, after the 24 hours of darkness, she is now beautiful and ready. After chopping her, I hung her for some hours – I had some stuff to do – and after that I did wet trimming since I find it more convenient and I don´t like to trim dry buds. I guess the best way for me would be to leave it drying for some days, do the trimming, then leave it drying some more, but, I sincerely don´t have patience lol. When I was in the last stock to trim (which was the main btw) the top bud looked strange to me so I opened it and it was starting to rot.. I got really sad but what can I do except for trying to save it, right? So I took all the rotten parts out of the top bud and tore it to pieces to watch it closely and keep it from getting any more mold. D94 Today I weighed the half part of the top bud that was already dry and it remained without any mold: 3.6 grams. D97 Everything is dry and now curing, the total weight is 68.6, 65 of the whole plant and 3.6 of what I saved from the rotten bud. I´m really happy with the results, the buds aren´t much dense but they look beautiful. D111 Today is the 14th day of curing. D120 Today I´ll be doing the smoke report, it´s been curing for 3 weeks and the smells is quite good already, I know it can be better but the taste is good already so I´ll be doing it today. More info on growing in the previous weeks and a summary of growing and also the smoke report are on the top at the strain review. Thank you very much for reading my diary!
Likes
24
Share
TOTAL YIELDS wet weight Blue Dream 1 - 600.2 G Blue Dream 2 - 552.9 G Blue Dream 3 - 565.3 G TOTAL Blue Dream - 1718.4 G ________________________________ Chemdog 1 - 616.9 G Chemdog 2 - 598.1 G Chemdog 3 - 558 G TOTAL Chemdog - 1773 G ________________________________ TOTAL OVERALL - 3491.4 G 7.7 pounds wet
Likes
18
Share
@valiotoro
Follow
Hello everyone week 3 of flower has passed for this Vanilla Latte auto 🍼 Same feeding schedule Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻
Likes
13
Share
@GrowGuy97
Follow
Flower day 24 - Ladies are coming along great! A few are having calmag deficiencies but nothing major, other than being a bit crowded I couldn’t be happier with the grow so far! Thank you to everyone following & happy growing friends!✌️🏼🌱 Flower day 25 - Humidity is at 47% temp is at 79F - Ladies got watered today at 6.5 PH , a few got some calmag. Happy growing friends!✌️🏼 Flower day 27 - RH is 51% Temp is 81F - Ladies got fed today, I got the fox farm Dirty Dozen kit is so the got a lot more stuff this week hoping it helps! Happy growing friends!🌱✌️🏼 Flower day 29 - Noticed some PM on one of the Gorilla zkittlez😫 have her pulled out of the tent right now apply neem oil hoping she will bounce back!
Likes
3
Share
I will be running this again and literally anything from In House Genetics.
Processing
Likes
9
Share
Turned light to 12/12 start week 6 day 35. Defoliated the central cola's to allow the sides to catch up. She's stretching fast at the moment. I'll start feeding her from week 7
Likes
94
Share
Earlier in the week, I saw a discolored bud, and upon closer inspection, I found bud rot. Ugh. I immediately cut off the infected bud and the one closest to it. I looked through the canopy but couldn't see any more affected buds. Right after, I went out of town for a few days to Mary Jane, the big Cannabis Conference in Berlin. It was the first one after legalization, and it was wild. I had an awesome time, and it was great to meet up with friends while in Berlin. What wasn't so great was seeing more signs of budrot when I returned home—those days of +85% humidity at the start of last week made the botrytis go brr. Sigh :( Checking the trichomes showed it was still early to harvest, but I decided to chop anyway to save the unaffected buds. I also decided to hang each branch separately, as it would allow me to inspect each one closely to ensure no affected buds made it into the drying tent. Another reason is to decrease the drying time. Usually, I prefer a long dry, but due to botrytis, I aim to speed up the process. Overall, I found 12-15 affected buds, and of course, they're always the nicest-looking buds. I don't care about the yield loss, as more than enough is still left. I only hope the remaining buds are unaffected, and I'll inspect them daily throughout the dry. Now we wait. And hope.
Processing
Likes
11
Share
@Hawkbo
Follow
These are doing pretty damn good for the most part. I figured out with the green buzz the only thing in bloom that raises ppm is the base bloom and the more PK which is good to know. Also been using lower ppm for the autos and they seem healthier than usual. These pics and the video were taken on Day 36.
Likes
9
Share
📆 Semana 9: La Epsilon F1 Auto avanza con fuerza en la floración. Los cogollos se desarrollan compactos y uniformes, cubriéndose de una capa cada vez más visible de tricomas. El aroma se vuelve más punzante, con toques especiados y cítricos que anticipan una cosecha de calidad. El ritmo de nutrición se mantiene estable, reforzando el aporte de PK y azúcares sin provocar excesos. ¡Seguimos creciendo fuerte! 💪
Likes
15
Share
Dear Growers , Over the next weeks, we’re excited to share a very special project with you: Sensi Seeds Berliner Automatic 2025 Release With dedication, knowledge, and hands-on practice, we’ll guide you step by step through the journey—watch with us as growth, development, and small wonders unfold before your eyes. Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sensi Seeds • Tent: 120cmx60cmx80cm • Light: 2x 200 Watt Full Spectrum • Humidity: 45% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 5.8 A Special Thanks To Sensi Seeds for the amazing collaboration, trust, and generous support in making this project possible. Your contribution is truly appreciated! Congratulations on Your Own Projects! We celebrate your growth, your creativity, and the passion you bring to the table. It’s truly inspiring to witness at Each visit . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!
Likes
26
Share
@Ageddd
Follow
------- ------- Quality is very good, buds are very frosty, and the plant was soooo beautiful to grow, smells like fruits so a lot of bugs hanging around, i like to contemplate nature and this was precious gift .. The only downside is the fact that the plant remained short in height, and yield was small... maybe it was the pheno, even so, weather was horrible when Vegetation... but you dont have to pay lot of attention on her. ------- ------- First Auto, and not impressed, im still in love with photoperiods, with this experience i know outdoor and autos are a good combination, if you are lucky to have enought sun...
Likes
17
Share
@reirrac1
Follow
She’s got some of the most unique bud structure I’ve ever seen, along with the most beautiful colors! Fading and thickening up very quickly as the grow winds down. Going to chop very soon.
Likes
18
Share
I changed my lights on 12/12, cause i mean that plant hasn't rudelaris gen, or i disabled that gen with HST what i did in week 7. Continueing with guanokalong bloom, but i have a little bit and i dont want this for my next grow, so i buy some biobizz bloom and topmax, they deliver it ot me in a few days. Than i flush and start again with biobizz.
Likes
410
Share
It's been 74 days of flower now and they only got another week left. A few of the girls were acting up so they were put into dark solitary confinement for 24 hours🤣🤣🤣🤣 bad girls... I have been flushing them for 2 weeks now. Almost there 🤘🤘. I'm very happy how they have turned out, the color, the smell, the crystals 👍. Very proud of what I created. One was chopped last week and is trimmed up and curing in jars now. Looks and smells good👍... The gals are still loving the new fc4800, TSW2000 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
29
Share
@HighDran
Follow
Su crecimiento y rendimiento fueron muy satisfactorios,tiene un colocón alto y un sabor y aroma excepcional.2160