Repotting them at day 24 to a 1 gallon (3,7l) Root Pouch. Gave them a little bit(2/3ish of the recommended amount) of GHE Tripart(Grow,Flora,Micro) hydrophonic nutrients and plants seemed to like it, growth of the roots was super fast and overall healthy looking plants.

📆 Week 9, 7-13 December 2023 7-13 December - Continued with simple adjustment of branches to receive maximum light. There was no defoliation of any leaf this week. Her growth rate has slowed and I believe she is heading in to the bulking stage. I’m satisfied with her size at this point. 8 December - Turned light power from 50% up to 75%, and raised lights from 18” to 21” from top of plant to facilitate the bulking phase of flowering. 📑 Let’s briefly discuss light and umol/m2/s or PPFD. First of all its all about numbers. Is there an agreeable starting point on these figures - the cannabis plant requires between 100-300 PPFD in seedling, 400-700 PPFD in vegetation, and 800-1000 PPFD in flower. It can go up to 1500 PPFD with certain C02 concentrations. I believe this may be generally accepted. Never being much of a numbers person, in ways I avoid it. I’ve grown indoor weed for a long time without a fancy device to tell me what this number was, the plant did that. A quality light and the plant itself will talk to each other in a matter of hours sometimes, days in others, I just need observe. But what I have come to realize the past few years is that these numbers, found in simple instruments (apps for smart phones) give us a very specific area of where she is within all these spectrums. It allows us more precision and insight to what would otherwise be a possible weak or vulnerable spot within our grow. I’ll use mine on a new strain, and to verify any questions. They are easily accessible tools for the common gardner. When we adjust our lights we can measure what will be optimal for our plant. Using my case in point; from: 50% power or 890 PPFD at 18” to: 75% power or 1080 PPFD at 21” **if not raised 3” - that number would have been 1320 PPFD - likely damage the plant - or raised any higher there would be no real benefit in what I’m attempting to achieve - likely waste of power** The 2023 ViperSpectra XS2000 lights (the ones I use) come with a new switch now that go from 25, 50, 75, 100% power and no option in between. So that kind of put a kink in a week or two during my grows I have to work around. Going from 50-75% power is a big shift in light intensity, and these lights are bright. Knowing what that number is and being able to adjust the height precisely to avoid damage is reassuring. I appreciate advancements that make growing a little easier. In most personal grows during flower I’ll go well over 1000 PPFD depending on the strain tolerance, without C02. Here are my experiences why: 1) my set-up allows it, 2) that number only reflects the greatest reading at the highest point on the plant - my reports, 3) when the plant is budding it is absorbing much more photons than when in the leafy only stage - everything is accelerated - this is a totally different discussion, 4) the additional light provided will proportionally increase a higher yield, and finally, 5) some of todays theories on light will change in 5 years, as it has from 10 years before, we still have a lot to research. LEDs are definately cream of the crop, but there is something new to learn I’m sure. Until then I can only tweak what I have in search for a tighter bud, higher in THC. I said I would briefly discuss this subject. Everything is possible with lights. It is science that says the cannabis plant does not have to produce secondary metabolites (trichomes and cannabinoids), in some cases it may not. It produces them based on its environment. She returns to you what you dedicate toward her. Something to keep in mind when deciding what kind of light to use to while trying to grow quality cannabis. 🍽️ Nutrient change on 7 December 🐲 Feeding schedule updated 7 December 🌊 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.1 at 65 degrees F 💡 Light power at 75% That is it for this week. Thanks for the look, read and stopping by.

Two plant same strain being feed the same and I have two total different out come. The first one is nice and frost growing with no issue even smell great. The second one I don't know🤦🏿🤷‍♂️🏿. I not doing anything different from the other on but it's growing but struggling at the same time. Where the first one is super frosty and smell strong the second has no smell is growing buds but is not frost at all and the leave have been dropping. So what I did was flush the second one and will just feed it ph water and no nukes for about a week or two to see if it get any better.

its day 35 since sproud and surag black rose is looking very good. grows the fastest looks the healthiest. Also trained her with the bending clips to make the branches stronger. I collected leave mold from the surrounding woods. a lot of white fungy hopefully usefull mycoriza.

I went ahead and transferred this week I also decided to start up my out door project things are looking good clones are Adapting well to new systems

Week has gone very well will be trimming all fan leaves come week end. The buds are already starting to come in and the smell is becoming more pungent

Everything is going good, girls are looking healthy and already reeking. Going to veg for another 4 weeks I looking to do a scog canopy which I would need bigger plants which need more time to grow. I can see there about to stretch this time in veg

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 24 since time change to 12/12 h. Hi everyone . The lady is developing beautifully :-). The buds start to get thicker and it smells better and better :-). I added 2 g GHSC Bio Bloom per l coco. That should be enough for the remaining weeks. Otherwise everything was checked and cleaned as usual. Have fun with the update and stay healthy 🙏🏻 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Man, I whipped these girls into shape! They got an amazing lolipoping~! its hard to sacrifice some of those branches but they look so much better for it and i hope it better allocates the plants resources! Did a big defoliation that really changed the way they look!

And off we went, the adventure with Zamnesia's F1 Hybrids started off great, with a stunning 100% germination 8/8 born without any hesitation after a very short time in water and subsequently in soil. She is exactly at the 10th, she is the Wurlz, she grows well regularly and very similar to the little twin. One of the characteristics of the F1 Hybrids is stability and for now it has been thoroughly demonstrated since day 10. For the rest we have to say everything is going very well, the parameters are in order, the girls were born in a biodegradable jar which biodegraded a little earlier than expected and I proceeded with the potting, no repotting, be careful the seedling never came out of the jar biodegradable the roots pass it at a certain point of decomposition. So we are now in a comfortable 11 liter house that is perfect for autoflowering in my opinion. Unfortunately, the Zamnesia pots are about to arrive but I didn't have them in time, I preferred to repot them for the sake of the plants, we need to photograph them of course but first and foremost I'm a grower and I care about the health of my little girls. Something tells me we will be growing a lot of Zammi plants so we will use them in the Official Grower version next time. Wurlz F1 seeds specifically https://www.zamnesia.com/10669-zamnesia-seeds-wurlz-f1-automatic.html Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. As for fertilizers, I'm doing a small comparative experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus, both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io

No issues with this plant, awesome buds with awesome scent and flavor! Super easy to manage during growth. I'd definitely recommend this strain.

Se puso la maya de scrog para que se inicie con la técnica, será la primera vez que uso esa técnica espero que funcione

Day 59-66 transition from veg to flower

Day 65, 17th of November 2020: Welcome back at the beggining of the 3rd week of flowering. They seem to be stopped streching and now concentrating on buds. All of them are gorgeous..... The 2 Zamnesia genetics Gelato and Kalini Asia are pretty and buds are forming nicely. Kalini Asia might strech a bit more but not long. The Sweet Seed ones are really nice and I am so happy because Red Hot Cookies is already getting red.... pistils and around the leaves.. I hope the same happens to the Red Mandarine and Tropicanna Poison also. They are so gorgeous. They calmed down I don't expect more strech. Fertilization still the same every 2nd day with the ratio and mix above. Some lollipopping (Defoliation) is also done. I removed all the LST the plant remains in the same shape from now. The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.

First week of flower growth for the older ones, younger ones are still sort of finishing stretch (4 day difference). Plants got much taller than I expected, especially the one which started out extremely weak with very messed up leaves, which is around 2 feet at the moment. I remember weeks 3 and 4 I was butthurt like “why are they so small :,(“ LOL, if only I knew. Now I’m having to actually move my light up! Past few weeks most of the new growth has been growing in with yellow tips, still haven’t figured out why. Don’t think it’s nute burn cause I’m barely pushing 800, could definitely be wrong though I’m too new to this. Otherwise they’re completely healthy, consistently standing right back up immediately after I train them whether it’s LST or even HST. Humidity is beginning to become a problem, which I was not prepared for. The paint in the closet is beginning to crack and bubble off so I will most likely have to go in there scrape it and re prime and paint it myself eventually. Ordered a small dehumidifier on Amazon because I’m on a budget, that was a mistake. It pulls about a quarter pint out per day -_- wasn’t trying to spend 150+ on a new one so I found a 25 pint on Craigslist for 40 bucks, it should work, picking it up later today. Edit: dehumidifier is up and running and works perfectly, rh now at a steady 50. Leaving on a trip for a month in December so I will unfortunately be forced to harvest at 12 weeks, really hoping they will be close to done by then. But yeah, still having fun tending to these awesome organisms!

🇺🇸 Week 8 of Growth – Mother Gorilla – Royal Queen Seeds 🇺🇸 This week, I’m happy! The roots have recovered well. They continue to eliminate dead roots, and you can see in the photos that new root growth is emerging. This is a great sign—it means the plant is regaining strength. The roots have resumed their growth, which is the big highlight of the week. The plant has also continued to develop foliage. It’s now dense and well-filled out. Today, I did a major defoliation to maximize light penetration and maintain good airflow. Now, I’ll let the plant recover because I think I’ll be switching to flowering soon, maybe next week or the one after. I really want to optimize light penetration to encourage new shoots, which will later become flowering sites. Environmental Conditions & Nutrients: We’re still at 18 hours of light, with temperatures between 25–27°C and humidity around 70%. pH and EC: I’ve had some issues with pH rising. It tends to climb to 6.5–6.6, so I have to lower it regularly. Since switching back to RO water, I stopped adding tap water. But now, I’ve started reintroducing small amounts to help stabilize the nutrient solution. Initially, my RO water had an EC of 0.1, which I increased to 0.2–0.3, and now I plan to raise it to 0.4 before adding nutrients. This should help maintain a more stable pH. The EC was set at 1.4, and now it has dropped slightly to 1.3, which is great news—it means the plant is drinking and absorbing nutrients well. Final Thoughts: • The roots are bouncing back. • The plant is strong and healthy. • I performed heavy defoliation and topped some apical growths to keep the canopy even as I finish filling the Scrog net. • I changed the nutrient solution this week, so we’re on a fresh mix. Now, I’ll let the plant recover from the defoliation, which might slow it down for a couple of days. Overall, things are looking great, and we’re getting closer to flowering! ⸻ 🇫🇷 Semaine 8 de Croissance – Mother Gorilla – Royal Queen Seeds 🇫🇷 Cette semaine, je suis content ! Les racines ont bien repris. Elles continuent d’éliminer les racines mortes, et sur les photos, on peut voir que de nouvelles pousses apparaissent. C’est un excellent signe : la plante retrouve sa vigueur. Les racines ont repris leur croissance, et c’est vraiment la bonne nouvelle de la semaine. La plante a également continué son développement foliaire. Elle est maintenant bien touffue et bien fournie. Aujourd’hui, j’ai fait une grosse défoliation pour maximiser la pénétration lumineuse et maintenir une bonne circulation de l’air. Maintenant, je vais laisser la plante récupérer tranquillement, car je pense la passer en floraison bientôt, probablement la semaine prochaine ou celle d’après. Je veux vraiment optimiser la pénétration lumineuse pour favoriser de nouvelles pousses, qui deviendront des sites de floraison. Conditions & Nutrition : On reste sur 18 heures de lumière, avec des températures entre 25 et 27°C, et une humidité d’environ 70%. pH et EC : J’ai eu quelques soucis avec le pH, qui a tendance à monter jusqu’à 6,5–6,6, donc je dois le réajuster régulièrement. Depuis que je suis repassé à l’eau osmosée, je ne mets plus d’eau du robinet, mais j’ai recommencé à en ajouter un peu pour aider à stabiliser la solution nutritive. À l’origine, mon eau osmosée avait une EC de 0,1, que j’ai augmentée à 0,2–0,3, et maintenant, je compte la monter à 0,4 avant d’ajouter les nutriments. Cela devrait aider à maintenir un pH plus stable. L’EC était à 1,4, et maintenant, elle est descendue à 1,3, ce qui est une bonne nouvelle : la plante boit et absorbe bien les nutriments. En résumé : • Les racines reprennent bien. • La plante est forte et en bonne santé. • J’ai fait une grosse défoliation et topé quelques apex pour maintenir une canopée homogène et finaliser le remplissage du Scrog. • Changement de solution nutritive cette semaine, donc on repart sur du neuf. Je vais maintenant laisser la plante récupérer de la défoliation, ce qui la ralentira sans doute un peu pendant 2–3 jours. Dans l’ensemble, ça se passe très bien, et on se rapproche de la floraison ! 🤘😎

Cada dia,con mas fuerza es el crecimiento de estos clones,acostumbrandose mas a su nuevo espacio e iluminación!!!