Got some sealant to properly seal my DIY CO2 generator and lil maggie seems to like it. Her buds are starting to swell up. For the CO2 generator I did the following: 2 Liter Bottle -> 1 Liter Bottle -> Fan (Fermenting) -> (Water Filter) -> (Distribute) Ingredients: Sugar - 3/4 Cup Yeast - 1 Teaspoon Water - 6 Cups Step 1: Add 6 cups of room temperature water to the 2 liter bottle. Step 2: Add 3/4 cup of sugar to the water and mix until sugar is fully dissolved. Step 3: Add 1 teaspoon of yeast and let sit until bubbles appear in water filter bottle. 
Step 4: Direct the end hose to the plant canopy. CO2 is heavy so it falls, use fan to blow it to the plant canopy.

This strain has never disappointed. Always a beautiful fade and amazing smell.

I fed her 100ml of phd water due to wilting leaves I will wait for the pot to dry up again before I feed her again! The next feed will probably be her last before I repot her. She still is receiving natural sunlight!

I think I should’ve let her veg a little more.

Seems like all is in order. I had to go away for a week because of an emergency and luckily a friend looked after them, only thing he wasn’t sharp on was training and defoliating which is why it got so big and bushy last week. Still no nutrient deficiencies. I visited a website called cannastats a month ago and it actually breaks down ppm requirements for each element. Was a lot of work to get my spreadsheet to calculate properly, but really seems to be working. If anyone wants further details on this, feel free to DM me. I think the big stretch last week was caused by high temps, as a window was left shut when it shouldn’t have been, and also the light wasn’t in the middle because my friend moved the lights up and didn’t realise, so the colas at the back stretched more... that’s my theory anyway. Overall all is good, switch back to 3200k bulbs again today. Need a wide angle lenses to take a photo of this thing, she’s huge...

Day 57 - Yesterday I noticed that the leaves are darker than they should be, so I re-made the mixing solution lowering the PPM from 750 to 550. I've tried to raise it to see how much nutes that ladies can handle since it's my first time in coco and I like to experiment. Now I'm going to finish this mixing solution and then stabilize the next ones on 650 PPM. Keep learning every day 🙏 Day 60 - Today I added one extra equivalent 75W LED to give the lower nodes more power. Some fan leaves touch it, wish they will not burn. New update in the next days.

Mass cloning! Not sure how many are going in the greenhouse yet but I will just give away any I don't use.

🔥🙌🏽

another great week, have some definition coming in. getting some yellow popping up. soil ph runoff is 6.0

I will update the report after it has dried, to give a number and also later with a smoke report. Stay tuned!

10/21 #1　 Drying　Day8 #3　Curing　Day38　＠boveda62% #4　Curing　Day41　＠boveda62% #Clone☓1　Curing　Day33　＠boveda62% #Clone☓3　Curing　Day21　＠boveda62% #Clone☓5　Frush #Clone☓4　Frush　short-day Day44 #Clone☓3　short-day Day11 10/24 #1　 Drying　Day11　@140g #3　Curing　Day41　＠boveda62% #4　Curing　Day44　＠boveda62% #Clone☓1　Curing　Day36　＠boveda62% #Clone☓3　Curing　Day24　＠boveda62% #Clone☓5　Frush #Clone☓4　Frush　short-day 47 #Clone☓3　short-day 14 10/25 #1　 Curing　Day2　＠boveda62% #3　Curing　Day42　＠boveda62% #4　Curing　Day45　＠boveda62% #Clone☓1　Curing　Day37　＠boveda62% #Clone☓3　Curing　Day25　＠boveda62% #Clone☓5　short-day 48　Harvest&Drying #Clone☓4　short-day 48　Harvest&Drying #Clone☓3　short-day 15

27/02/19 - Cant wait for these to be done as I’ve never had gelato before so I feel like I’m missing out 😂 but yeah other than I let them stretch abit taller than I usually prefer it’s all going well, new genetics/nutrients/medium seem to be doing the job. 02/03/19 - Just transplanted all into their final pot, just in time I think as it looked like the roots were starting to circle at the bottoms of the pot, sprinkled half a tea spoon of Mykos on each hole prior to the transplant & fed them 2.5 litres each. I was going to saturate the whole pot but I’ll do that next feeding.

Started a little training, cut down the older fan leaves and topped up. I’m adding a tiny bit of root stimulator cause changed the pot size last week so it will to promote a faster growth. Gotta keep this lady low cause the box is quite small. So excited 😆

Up up and ... one more week here We go ❤️🤘 so they are grooving hehehehe i'm focus on producing good amount of trichomes and tryin to bring some colors to them. i reduse nutrients and stabilized my condictions . i like this AC thing lol I brouth down my temps to77 day time and 65 nigth time, humidety is the one i'm having problens bringing it down but is not too bad any way is going up and down and arround 55% so is ok Peace out and stay happy and safe D

Ok this week is going well. Some of them are stretching more then the others and that's ok. Of the little bit of smells I got from them just buy rubbing a frosty sugar leaf the 1st "blue" plant has hints of mint, the 2nd "red" smells like generic weed and the 3rd "yellow" is kinda a mix of the both. I was thinking they wold have stretched more but guess not. Still have another week or two before the stretch is done and its starts to thicken up. Plants are showing some signs of something, have not looked into to much but the blushing of the leaves on plant #1 "blue" could be from my heavy hand at water or cooler nighttime temps that have been hitting it. This is the one that is having the most issues. Because of this I did a soil slurry test of all three pots and they all had aorund the same EC but the PH was different in each by a significant amount. it went up from plants 123 it is to high in plant 3 and kinda high in all the others as well yet looks fine, and the one with the highest PH its the biggest of them all. go figure. Could have been a bad sample. I did not want to disturb the roots to much but wanted to get a full spectrum of soil from top to bottom of pot. I brushed off the top dressing to not artificially mess up the EC results and took it from about a inch in from the edge of the pot in one location only vs multiple. #1 "Blue"........EC=0.25||PH=7.20 #2 "Red".........EC=0.32||PH=7.36 #3 "Yellow"....EC=0.27||PH=7.95 With this in mind I will contemplate the idea of lowering the PH levels of the water I give them to help offset this. from 6.5 down to aorund 6-6.2 Have not checked in on clone is a while, they have been outside hardening off for the most part. I only have clones of plant #2 "red" and #3 "yellow" the #1 "blue" clones died and IDK what one is what in the 2nd round of clones I just tossed a bunch of cutting from all of them into a jar. so their is some #1 blue in there maybe, I know its mostly one of the plants just can't recall what one. Applied some BTi to the soil in the last water to kill the gnats, thought I had some nematodes leftover but I did not so went out and got some BTi at the grow shop. Should do the trick. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you're interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.woodroom.tel/grower/MedicGrowLED

Creció como un real elefante , grotesca . Sin ir más lejos unas de las autos con mejor rendimiento

She was pretty much on AutoPilot all week. Growing and drinking like crazy.Running out of head room and i hope she gets the point here soon lmbo… More below ⬇️⬇️⬇️ 8/16: Trimmed down dead/half dead leaves from bottom of plant. Feels good to see just all green without the couple of eye sores. She still a sexy girl! Topped of rez with the rest of her nutes in half gallon jug. I’m n to half gal jug of water before next nutrient batch mix. 8/17: Just been topping off the rez all day! She has been drinking heavy! Will need to mix another batch of nutes tomorrow. 8/18: Mixed new batch of nutes today. Mixed in gallon jug. Split into half gallon jug. Topped off rez with full half gallon jug then some plaint water from half gallon jug. 8/20: Mixed another batch of nutes for the week.

And the first week of flower begins! I started this week off by defoliating any and all large fan leaves blocking lower nodes. Also did a little supercropping on BL to get her to spread just a bit more. I raised the light up to 45cm and this will be the final height. They've been drinking really fast by this point. Definitely going to be very diligent with waterings/feedings until harvest. Cheers all! This is my most painless grow to date, praying for a nice and smooth wrap-up to this cycle as well.