Likes
Comments
Share
Well I flushed her this week. Only water. As you can see she is getting fatter and she is still shooting pistils. So I am just waiting till she stops doing that then she will be ready to harvest.👻
Processing
Likes
56
Share
@Zannabis7
Follow
Day 12 of organic grow and all is well. Seemed to have dialed in the conditions and able to keep good air movement, CO2 levels, and consistent temperatures/humidity with the ThruWall Closet Fan (Model TW108 ), and the Holmes Twin Exhaust/Intake Fan (Model HAWF-2041). Humidity is maintained with a Lovoit 6L Ultrasonic Programmable Cool Mist Humidifier (Model# LV600HH). Added a SCROG screen (just a cargo net) and bought the Sample Pack of organic nutrients from Nectar for the Gods (just pay shipping and they will send you the sample nutrients - check out the website). People say their line of nutrients make the buds smell and taste like no other! I have always been an organic Earth Juice nutrient guy, so I am going to experiment with combining the two. Lights are on 24/0 and she has tight internodal spacing with good vertical growth. Room that closet is in is beginning to smell skunky at times, and like diesel at other times. Will begin light organic nutrients with next watering. If you made it this far, please check out my other autoflower grows. Day 13 - Watered today with very low strength nutrients added. - Zannabis7
Likes
346
Share
@Canna96
Follow
Hey now, was a pretty good week for the Sour D, I didn't really make any changes as far as the nutes, still at EC of 1.6, with water from my dehumidifier, then cal mag, then maxi bloom powder, then liquid kool bloom. Only real issue I had this week was on day 58 I noticed her leaning a little bit, and I went to move her pot, and she almost toppled over. It really scared the crap out of me, so that is why you now see all the wire tires wrapped around her base. Definitely something I will be more mindful of in the future. Still dealing with high temps and humidity, but my dehumidifier has been a real Beast. I will also add that when I open that tent, the smell of Diesel Fuel, and Lemons smack me in the face like a 2x4. I have never smelled anything that pungent before. I am amazed at how well my Terra bloom carbon filter is doing, although I am sure it helps I have an 8x24" inch filter and Infinity T8 exhaust running on the lowest possible setting in my tiny little tent. Really hoping for some thick and sticky flowers! Thanks for checking me out and and Blaze On....
Likes
3
Share
We entered the 7th week of flowering, we are no longer approaching the cut but it is still growing and producing giant buds, the smell remains strong, sweet, little by little we are approaching its end 🙌👏
Likes
55
Share
@Xpie77
Follow
Will start defoliation in 2 weeks. Want to try not to do that to soon. Started give some food to the ladies. Some like it, soms its just a bit to much. 💚Please Like This Diary and Leave a Comment!💚 Plants are growing nicely! Just some water @ pH 6.5 Red Wine was created by crossing Rozay F2 with Jet A. They are 2 very powerful aromatic Cali hybrids. This exclusive new Cali strain is a very strong and fast flowering indica-dominant strain. It has an aromatic, intoxicating and relaxing effect. That is comparable to enjoying a good glass of wine. Red Wine has an average flowering time of about 7-8 weeks when grown indoors. Outdoors it is ready fairly early, usually around the end of September. The yield is very good. Indoors she has an average yield of 450-650 gr/m². When growing outdoors, 600-800 grams can easily be achieved per plant. Red Wine has an aromatic scent that can be compared to a full red wine. Her full, purple-green buds are very compact with few leaves. This is very convenient when cutting the plants and saves a lot of time. Smoking this weed gives you a nice high with relaxing properties. The taste of Red Wine is very fruity sweet with an aroma of red grapes. Flowering time: 7 – 8 weeks Genetics: Rozay F2 x Jet A 30% Sativa, 70% Indica Plant height outside: 100 – 180 cm Outdoor harvest month: from June to October Yield indoors: 450 – 650 gr/m² Yield outdoors: 200 – 800 gr / plant THC: 25% 💸💸💸Wanna Try Red Wine from Seeds Genetics?💸💸💸 https://seedsgenetics.nl/product/red-wine-gefeminiseerd/
Likes
36
Share
Gonna keep an eye out for crosses with face off OG! Good outcome for 1st grow👽 BHO made made with whip it premium after about 3 days in freezer with column. Didn't run w dry ice🤷🏼‍♂️ evap then vac with as little agitation as possible. -Dosido 22-16 has a earthy sweet cream well rounded berry cookies nose & a funky diesel undertone -Effects are hard hitting and euphoric, can put you down for an indica nap or keep you fine, groovy & grounded depending on the dosage. -An ideal indica IMO for anyone looking to ground mental health state from anxiety -Also helps with pain from stomach pain to a migraine, insomnia, appetite , Post workout recovery. Overall This strain is potent indica, Calms the mind & body putting you in a nice place
Likes
6
Share
will edit this text, the page closes all the time because of lack of the memory or something, so im saving it all the time
Processing
Likes
70
Share
@MephistoGenetics, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 10 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. I am very excited to see how the new growroom will work and how this Illuminauto 21 - Sour Crinkle will turn out. Illuminauto 21 - Sour Crinkle (Grape Crinkle x Sour Crack) Two of our fastest and frostiest varieties collide to make a sweet and sour delight! Expect super frosty, compact nugs that won't be a toke for novices. Destined to be a great strain for extraction work too! Plant size - Small - Medium Cycle time - 60-65 days from sprout Indica/Sativa - 80/20 Frost level - Extra Ridiculous https://www.mephistogenetics.com/product-page/illuminauto-21-sour-crinkle -------------------------------------------------------------------------------------------------------- 2017-10-02. New week. Added pics and video. The girl is 30 cm high and starting to bulk up, there is a little frost beginning to show. Starting to feed them more nutrients now. ---------------------------------------------------------------------------------------------------- 2017-10-06. Added some closeup of this beautiful girl.
Likes
18
Share
Aug 16: Sunday Punch EV is a strong plant and it will likely be my biggest yielder this year. Have the UV lights going again today and the buds are looking great. Natural UV drops really fast here after mid-August so the UV lights should help them finish strong with higher potency. Aug 18: flash pics before using red light at dusk is okay, but don't take flash pics if you don't have a far red light. Bad idea. Likely. Video shows how to use the far red light at dusk. Just a few seconds at the right time of day is all it takes. I use Civil Twilight for my location as listed on timeanddate.com which is a few minutes earlier each night at this time of year.
Likes
2
Share
@DrBud420
Follow
23.05. today is the end of the fourth week for the plants, they haven't progressed much since last week, they grew a few cm and gained a little weight, but they are healthy, which is the most important thing... in a few days I will transplant them and top them because some of them have already developed the sixth pair of leaves, so I simply have to top them. turned out... I thought of transplanting them into 10-liter pots and after two to three weeks into 50-liter holes, however, the weather didn't cooperate, and I was already late anyway because of the bad weather, and because of the same, my plants in the fourth week were the same as they should have been in the second, and because of the same, I couldn't even transplant earlier... now that nothing went according to the "plan", of course, I don't know how smart it is to transplant them into 10 L and then into 50 with the fact that it is with me the longest day of the year is June 22, so that actually a week after that it can start flowering (it usually starts at the end of July or at the end of August, but it can be late and start even in September, and it also knows how to plow and start already at the end of June)...now I think that it is better to buy smart pots of 50-60 liters and immediately transplant into them and then just bury them...another problem with that is that the soil that I took for vegetation has food in it for a month days, if I transplant twice, it may happen that it enters flowering, and the food for the vegetation has not yet been used up, and that would be a problem...advices are welcome Stay high!!!
Likes
8
Share
Likes
31
Share
Tarde en subir el resumen de esta semana porque ya pensaba subir las fotos de la planta cortada, pero por el tono de los tricomas esta si es la última semana, ya el 18/11/22 subire fotos de la planta cortada lista para curar. Mas de esta semana no pasará, luego esperare para subir el resumen de la genética. Volviendo al tema de la planta esta semana solo fue regada con agua, asique el lavado de raíces se cumplió a la perfección.
Likes
21
Share
Day 19 of flower, I went ahead and lollipoped both girls. This will be my last time defoliating that heavy. As the days go by, I will defoliating here and there. They’re growing strong and healthy as well. 51 days until I harvest. I can’t wait! Catch yall on the next update ✌️🏾
Likes
18
Share
@Manic
Follow
Day 43 and I shut her lights off at noon, and I'mma let her b without light til 7 in the morning so her first day I'mma let her go 21 hours without light then she will be on a full 12-12 schedule. Gave her last feeding with quarter dose of ff nutes yesterday so she can have reserved nutes for her transformation, her next two feedings will be with regular distilled water with 6.5 pH. Will still maintain the LST for the next few weeks til her branches harden. Don't have any pics for day 43 cuz I want her cut off from any light. Day 44 will have pics and will see how they responded to flipping the lights schedule throughout this whole week. All and all they are doing great and I will prolly start to defoliate next week.
Likes
3
Share
@GeminiCQC
Follow
Going back to autos only for this round. Trying out Earthbox jr.'s. As usual, I'm just gonna have fun and chill with the plants till they ready. The wedding will be more of a press plant, so I'm trying to be specific with it (not sure how)
Likes
166
Share
@iMeus
Follow
Hello friends! Here’s the skinny on my grow “First Mainline Attempt!”. I’m going to split this up a bit so it’s easier to follow, this will be a long one :) ~ Progress Day 56 ~ There’s been a lot of growth happening since I got this new light from KINGLED, genuinely surprised. I could notice the difference within hours that my little ones where love’n the light! Compared to last week the difference is huge (to me). I was using a Bestva LED light for my grows up to this point. I read reviews and thought that would be the best light (Bestva) within my current budget. But my plants didn’t seem happy, or growing at an expected rate, I thought I was doing something wrong. Well long story short the KINGLED has made a impact on my plants, I can’t believe all I needed was more light. I will post the light specs below if you’re interested. Now i’m gonna jump right into this weeks growth. I’ll separate each plant below and provide details on height and structure. ~ Individual Progress Notes ~ [CBD Blueberry] Height: 6.0" Tops: 8 Notes: Smallest of the mothers, and she has a weird asymmetrical growth pattern, the nodes don’t match evenly, not sure what mutation this is. It could be that this strain doesn’t like being mainlined.. If this negatively impacts the overall yield and quality I will kill off this mother plant and clones. I have 2 more seeds to germ so it’s not a total loss. [Mazar] Height: 8.0" Tops: 8 Notes: This girl is responding the best to the mainline experiment, I’m excited to clone her off later. Nice symmetrical growth :) [White Widow] Height: 6.1" Tops: 8 Notes: I honestly thought she would be the runt, guess not! Though not the biggest she has the phatest leaves and thickest canopy. I can only wonder what the next few weeks will be like. Must clone! [Super Silver Haze] Height: 7.2" Tops: 8 Notes: Another that’s responding well to the treatment. I’d like to clone her of as well as soon as there is enough growth for me to collect samples. I’ve only had this strain once so I’m hoping this will be as good or better, who knows :) [Purple Urkle #1] Height: 8.0 Tops: 8 Notes: I lost the clone to this girl, I'll need a replacement(s) to test before I flower, more stretch than the others, hmm (both 1 & 2 need to be tested via clones) [Purple Urkle #2] Height: 9.0 Tops: 8 Notes: This girl is very stretchy and her clone is insane! Thickest stalk out of any of my girls? I don't know why but she is phat, love it. Check out my diary "A Few Clones" if you're interested in this possible monster of a plant :) ~ Concerns ~ My only real concern at this point is mite and insect control. This grow is in the garage so that’s not especially easy to avoid. Staying vigilant and nuke’n everything that moves (without harming my plants) is working so far. Those pesky mites and other fan favorite insects! I swear I’ll get my revenge >:( ~ Final Thoughts ~ Other than the local mite population making claims to my property, I’m very satisfied with this weeks progress. Installing the ducting and fans was the hardest chore I had to do, and now that’s taken care of. Before I finish up I want to apologize for not being as detailed and thorough these past few weeks. Now this is a bit personal but I’m willing to share it with ya’ll. My mother has stage 4 cancer, yeah… It hasn’t hit me like a train yet, but I’m still suffering. I’m trying to prepare myself in the event she doesn't make it through chemo and that’s a tough pill to swallow friends. Hopefully I can produce some cbd medicine for her to ease her pain, and help to improve her quality of life. I’m going to close this weeks update by saying thank you to all of you wonderful people, the support and comments make my day, I appreciate em all. Much love, Meus [Light Specs] Brand: KINGLED Series: King Plus Model: 3000 watt Replacement: 2000 watt Avg Power Draw: 615 watt Input Voltage(AC): 85-265 Volts Frequency: 50-60 Hz Lifespan: 50,000 hours Total LEDs: 300 Core Coverage Area at 24": 7.8' x 7.5' PAR at 18": 760 μmol/m2s Lumens: 23454.6 Weight: 15.8 lbs
Likes
144
Share
@DevilsBud
Follow
New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
5
Share