🤣🤣

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

I harvested this plant on the same week that I pulled down the 2 B Blunt, so there was no more progress in the garden. Was thinking that it was going to take a bit longer to cut down than it did (I wet trim). Feel free to let me know why that is not the proper way to trim... I have my reasons and it has been working for a while.

Bueno , este es el segundo cultivo que realizó del la cepa "Waka" , el anterior lo tengo igualmente documentado en otro diario . en esta ocasión cultivamos los clones que habíamos recolectado del cultivo pasado , guardando los fenotipos que nos gustaron más y los clones restantes los pasamos a floración que fueron los que se le hizo seguimiento en este diario. El crecimiento fue bastante explosivo y reaccionaron muy bien a cada trasplante realizado . pude observar que los clones de cada fenotipo seleccionado se desarrolló con mucha similitud al de sus madres . El olor en vegetación es bastante discreto y en floración se pone un más intenso El desarrollo en floración fue explosivo generando bastante resina y se vieron muy hambientras . Al fumar se puede sentir un rico toque cítrico en las N° 4 se siente un fuerte sabor a limón en algunas flores mucho mas marcado que en otras, N° 3 y 13 un agradable toque a naranjas muy rico de sentir en el paladar , La N° 8 con pizcas dulces bastante interesantes. El humo al fumar es muy suave lo que permite sentir mejor el sabor de cada fenotipo.- saludos y buenos humos😉 Al momento de cosechar se cortaron los clone y se dejo secando en oscuridad a temperatura ambiente por cerca de 16 días posterior a eso se pasó a curar en frascos

Auto Flower AK Triple Haze (A-AK3H) by Super Sativa Seed Club: Day 42 from seed, 17 Days in flower. All are Green, healthy & growing. Still running a comparison of living soil+Teas vs Coco/Perlite+Fertilizer. Dramatic difference as you can see in the video. Not a lot of difference in Bud size though. But we will see. Still some time for the stack & ripening stages. Exception of course is A-AK3H #3 whom is the runt of the litter since it began. Weekly Environment: 77F, 46% RH, 975ppm CO2, & yesterday moved to 1100-1300PPFD 12hr Lighting. A-AK3H #1, 2, & 3 all received 2 teas this week along with an amended soil application to keep up with nutrition.

Starting to feed plants with molasses. Smell taste Is changing from vegetal to fruity .😍 Added smart thermohygrometer sensor for Optimize humidity ranges also it's rainy this week and humidity raises a lot. Installed 100mm pipe in intake ending to heater and controlled by thermosmart sensor for lowering humidity since it's rainy days.

Week six all the plants have been doing very well. A few of them have suffered some broken tops because of me but other than that doing well the leafhoppers have been doing their best to do some damage but nothing major and the hole seem to be holding water very well I’ve been minimally watering only about once a week just a couple gallons. They seem to be retaining enough water, giving them their boogie brew tea every seven days and their pure protein with soluble seaweed every four days that’ll be the schedule till the end keep on pulling them down and stretching them out trying to get those branches to level out and grow more tops upwards. These plants this year are definitely larger than my previous ones, which surprised me I started these a little later, but they are much taller and growing much more vigorous than the last and the last were very large so high expectations for these week six everybody’s doing great. ..

Buenas amig@s, pues una semana más y pues contento con el crecimiento la verdad, no he tenido problemas con los insectos 🐜 tras pulverizar el insecticida natural que ya os comenté. Tras cambiar la tierra que tenia en un principio por la proporción turba-perlita 50/50 he notado que el crecimiento es mas rápido y el agua se retiene mucho mas. Gracias y ansioso por ver el final de mi primer cultivo, parece que octubre se va a hacer rogar, y en tanto tiempo podrían salir mal tantas cosas que me tiene de los nervios LOL pero bueno, mente fría, esperanza y alegría.

@humboldtcountysown LLC for Veg&Bloom Thanks Again Phil&Gail! @rocket_seeds Newest Seed Sponsor!!! @vivosun.official VIVOSUN®️ VS2000w & VS1000w Grow-Thank You so Much J Bro! I'm Honored and Very Proud to be apart of your Family/Team! I #FlippedToFlower on Friday 6/24/22 ShoutOut to our Bro @soillife420_2 for Gifting us this VS®️ VS1000w LED Grow Light! Sponsored VS®️ VS2000w LED Grow Light with Samsung LM301 Diodes & Sosen Brand Driver, Dimmable Lights, Sunlike Full Spectrum with Grow Room Glasses for Seedling Veg & Bloom Plant Growing Lamps for 4x2 Veg & 3x3 Flower Grow Tent or Grow space! Lower Cost & High Efficiency: VS®️ VS2000w LED grow lights use the latest LED plant light technology including Samsung LM301 Diodes, high-energy efficiency with 2.9μmol/J; Extremely high output but consumes only 200W of electricity, making it more efficient than traditional HID lamps and other plant lamps on the market! It comes equipped with 3000k Warm white Diodes that Boosts Bloom, 5000k Cool white lights that Promotes Germination and 660nm Red lights for Higher Yields! Thier attached to a Durable, Waterproof Aluminum Heat Sink with Low Noise and only weights 9.03lbs. with a 5 year Warranty! SuperCropped3rdTime #TransPlanted into 3GallonPots from 1GallonPots #Lollipopped ToppedThe3rdTime #LeafTucked Transferred into our 6×5ft. #ChronicCave BasementFlowerArea and Growing under our Brilliantly Bright VIVOSUN®️ VS2000w-VS1000w with the 12/12 lighting schedule, Dimmed⬇️=50% around 30" Over Canopy's We Love to use Team @tnbnaturals @tnb_naturals #TNBNaturals #TheEnhancer #Co2DispersalCanister for Vigorous and Great Growth for our Grows! ShoutOut to Bro @dr._weedman I'm Growing from Team @ilovegrowingmarijuana_strains #HeroMixpack #ILGM #SkywalkerOG-Fem #BruceBanner-Fem #BlackWidow-Fem and started Up a New phenoz of those, my Team @nirvana_seeds nirvanashop.com #Zkittlez-Fem and a New pheno, Team @nukeheads.nutrients #CheetahPiss-Fem clone and from my Wonderful Wife's @juicyjj85 plant, I've taken two Clones from our Bro @goliathgrowshow #GoliathGrower #MacBerries-reg Thanks Again Everyone!!! #BudBrothers4-L Happy Growing! Cheers Famz!!! Much Props and Much Pars!💯VS®️💡's+⛺'s=🏆's #LoveWhatYouGrow #BringGreenToYourLife #vivosun #vs1000 #vivosungrowlight #vivosungrowtent #vs2000 #vs3000 #vs4000 #vs1000e #vsf4300 #hcf1600 #hcf3200 https://linktr.ee/vivosun.official https://www.linkedin.com/uas/login?session_redirect=%2Fcompany%2F77743591%2F https://youtube.com/c/VIVOSUN https://instagram.com/vivosun.official?igshid=YmMyMTA2M2Y= https://www.facebook.com/198734887125319/posts/1724749361190523/?extid=a&mibextid=baczqb https://mobile.twitter.com/VIVOSUN/header_photo https://pin.it/2uORZDs https://www.tiktok.com/@vivosunglobal?lang=en&is_from_webapp=1&sender_device=mobile&sender_web_id=7110614037704197678 https://www.amazon.com/stores/page/A2F7F49B-7130-4423-BF67-59CE3EC5A44F?maas=maas_adg_01A961034EF443FE5006848DB5A6C70B_afap_abs&ref_=aa_maas&tag=maas&ingress=3&visitId=3e0468ed-290c-4c15-9d06-7a22afdff345&mc_cid=e5417eb03f&mc_eid=69bad0aef8 https://www.amazon.com/stores/page/3EDD8CEC-742A-44F6-90C4-0930E78DD730?ingress=2&visitId=6cfb6992-f86f-4c85-a5ad-4cb5d1c06d07&ref_=ast_bln Limited-time deal: VIVOSUN 6-Pair 1/8 Inch Adjustable Grow Light Hanger, Heavy Duty Rope Hanger with Reinforced Metal Gears, 8-Ft Long and 150 lbs Weight Capacity Rope Rachet for Grow Light, Inline Fan https://a.co/d/1WezHcI

All 3 of my bubble og plants seems to really like being topped they all are starting out nicely with good spacing for the leaves. The stems are still a little thin I'm guessing they will probably strech alot early flower and have flimsy stems needing tied up. Hopefully they grow like one if the 1st plants I ever grew and I still haven't grown a plant like it. They all have a great small so far. Already when I open the tent door I can smell these plants it hits you This past week, the plants went from being weak little plants that had just been top and now they are on there way to being nice and sturdy. I could flip them to flower now if I wanted. I plan on letting them grow a few more nodes on each branch before I give them the flip. My hopes is I get longer colas if I let it ride out longer in veg cutting off all the lower growth b4 flower. I have had the light on 25% still but today I raised it up to 3o% I like to have them handling 40% nicely before I turn them to flower

start of week 6. (day 36). i am not sure how far my plant is in flower right now. she looks like week 4 now but shes in flower since march 12 (today is may 4th) i noticed she kept growing the first weeks of 12/12 but here she is now, huge and bushy but looks like a week 4 or 5 of flower here... gues ill have to flower her at least another 3 weeks from now. as u see in the video, the smallest plant doesnt have too much yield, thats because i cut of so many undergrowth (stems and leaves) during the third week of flower) this plant was already in a very bad shape before flower. how she looks now is unbelievable compare here here and watch the pics of week 5 vegetation. i flushed the system this morning untill this evening ( in the 12h dark period they run straight rainwater) and when the lights turned back on tonnight i added the nutrients at 820ppm (0.5 convertion) i hope she will now get more explosive as i had 250 grams dried but last time i grew this on soil (2 plants, this diary is on here too “critical”) these were grown under the same light in soil, finished quicker and had more yield (as of now) anyway lets see what happens the next weeks. may 8 (day 39) defoliation, not too much just big fanleaves from the top of the cannopy and underneath the net, more light reaches budsites now

Day 64, all defolitate, and a few cut on Cream Cookie that I try to clone... Tangie Matic is doing her shit, loving the photoperiod.. 😎 The others are slower but I'm optimist about them 😅 See ya next week ✋

21 days of flower 🌸🌼

Belle défoliation semaine 4 et 5 petit tête qui apparaît

DIVINE OG KUSH / DIVINE SEEDS WEEK #6 OVERALL WEEK #5 VEG This week she's doing good recoveredfrom topping and fresh growth she's got a nice green color to her and hasn't had any issues this week. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you DIVINE SEEDS!! DIVINE OG KUSH / DIVINE SEEDS

Week 6 I seem to have solved the problems that were appearing 🤞 I have a problem with watering. due to the size of the por and the respective evaporation. I have been giving water with higher doses of nuts but less often. Is in week 6 of 7-8 maybe leave it for 9-10 weeks. I want her to feed a little more and then I'll do the real flush 🛁🛁 The main colas are strong and with great structure. Some main branches look authentic colas... other branches are smaller but good looking. I did a defoliation and laid the canopy down so the light could reach lower and used a net to lst🌞🌞

2nd Week Report 24/10/19 - 31/10/19 25/10/19 I didn't flushed, but I filled the reservoir with 3l of 10% strength solution. Added to the current solution the same nutrients quantity as the first week (except for "Root Stimulator" and "Enzymes" that the first week were 20% strength and now got back to 10%). Now the reservoir should be filled with a 20% strength solution 29/10/19 - CMXL is 10cm height and it is growing really well along with his roots. - LSD is 6cm height and it is growing a little slower like his roots, but both of them look healty. I think in some days should start growing fast like CMXL Added 2 low frequency (113kHz) Ultrasonic Piezoelectric Discs: - One for the root chamber that should help with root expansion as it nebulize solution and the fog carries nutriments (like a small aeroponics integration) and will help my attempt of cloning. - One will stand in a 20% solution next to the plants to increase Humidity (and maybe feed them a little). I'll try to set them running 24/7 Switched water pump that sprays Rock Wool from 5sec every 30min to 6sec every 60min. Next week I plan to stop using the pump as "Top Feed" if roots will be well developed and probably I will use it as "Recirculation Pump" to keep nutrients in reservoir mixed better 30/10/19 Roots exposed to air inside reservoir got a little yellow after inserting the small fogger, so I will try to keep it 30/30 seconds ON/OFF. I will check next day if it's helpful to existing root o as root propagator for clone trial Topped CMXL and did a little of LST just by bending the main stem to expose the small growing next to fan leaves. The cutting was immediately dipped in a solution made by honey and Root Stimulation (the same I use for reservoir solution as it should contain rooting hormone), hoping it covers the cut like a gel and don't let the oxigen get in the cut until there will be some new growing. After that I put the cutting on the lid without any pot, as you can see in the picture some tape is covering the hole and it holding the topping. I covered it with a small jar to maintain humidity, hope to see some roots next week ;) I plan to fim LSD tomorrow if tonight grows enough 31/10/19 Filled the reservoir with 6L 20% strength solution and after that added 10% nutriment for 36L directly into the tote (like I did last week). Now nutrient solution inside reservoir should be 30% strength and it's ready for the 3rd week Pinched LSD Top with my fingers and applied LST by bending a little the main stem. Hope this FIMming works and returns better yield ;) Cloning trial didn't worked (I was expecting nothing, just a test), the cut part of the topping is already dry. I knew the topping was too short, next time if I try to clone his stem will be at lest 2cm Last Update 31/10/19 Next Update 03/11/19 with the next week See you guys ;)