July 13: first heat wave of the year was last week, and there is another forecast for next week, but for now this is pretty ideal cannabis weather. Added a third Scrog layer and tied it off to some weights (partly filled water bottles) to open up the canopy further. Works, simple, and easy to move around the yard as needed. I really like this plant and how it’s going so far. July 14: re-scrogged again to widen the canopy further. Supercropped the ends to maintain the same elevation at the various growth tips. Four stems in middle were topped to keep them from getting ahead of the others. Experimenting to see how it goes. July 16: hot again. Increased water volume and sometimes misting air with garden hose water for the evaporative cooling. She looks great. July 17: another 32 C day. Watered four times today so likely 7-8 L in the heat with the growing plant. July 18: hot again. Mixed Power Bloom and malted Barley with some soil and added as a top dressing.Hit 34 C and 20% relative humidity which is far too hot and dry for cannabis. Lots of watering, and misting of leaves and air to provide some moisture and cooler temperatures.

I decided to spend the weekend looking for a good Co2 generator setup. It was quite easy to get it running. All you need is two containers, tubing, yeast, sugar, and warm water. Now I'm just waiting to see how long it will last before I have to refill it. Here is a YouTube link with directions; https://youtu.be/Gxb_G3JAhso The plant on the left started to get too wide so I wrapped a bit of string around the two stems and brought them towards the inside of the plant. Then I tied it off on the hooks loosely so I can still adjust it. Just for good measure I raised the light a few more inches to keep it about a foot distance.

Been doing a lot of tweaking with the new gear and multiple sets of plants. Been quite a busy week and probably behind a bit on keeping track of everything. I'm currently working on trying to get better charts made to keep track of things like light schedules, detailed feedings, height change per day, etc. My current setup is my oldest 1st set of plants (5plants) and my 3rd set (6 seedlings), in my new 4x4 Vivosun grow tent equipped with a Spider Farmer SF-1000. I have kept my 2nd set of plants (4plants) in my original 4x2 Vivosun equipped with 600W Vivosun LED. These plants had been extremely stressed due to not having soil or containers available with shipping constraints. They've been doing a lot better since then and I'm hoping they make a full recovery. Fingers crossed! Running 24hr light schedule. Both tents equipped with temp/hygro high and low ranging from about 71-81°F with an average of about 78°F. Watering by plant pot weight, according to GH FloraTrio + CalMag Schedule. Mild LST via tucking of leaves blocking developing sites. No more than 3 leaves removed per plant, per day to avoid stress. ______________________________________ Can't wait to start upgrading the quality of my journals and to hear you all's feedback! Happy growing and good vibes as always 🌱 ______________________________________ 4/29/20 - Update Okeydoke! Feel like I've been doing too much running around everywhere. Sorry for being so hectic the past week or so if anyone has been keeping up with this 😂 For the time being, I'm currently running all three sets of my plants in my 4x4 tent. It's running all three of my fans, both lights and has the carbon filter system and humidifier hooked up to it as well. I basically have the other 4x2 just sitting as a shell for the moment. Either planning to save it for climate control when curing the first harvest or sell it to invest in another Spider Farmer SF-1000 LED or equivalent and possibly another 4x4 tent. I have started a grow chart that's still a little sketchy but if nothing else having it here hells me keep up with it that much better. [April 24th @ 3pm] Plant 1- (11in.) 2- (9in.) 3- (14.75in.) 4- (13in.) 5- (10.75in.) [April 26th @ 1:30pm] Plant 1- (11in.) 2- (9.5in.) 3- (18in.) 4- (14in.) 5- (11.5in.) [April 27th @ 12pm] Plant 1- (11.5in.) 2- (10.5in.) 3- (20.5in) 4- (15.25in.) 5- (11.5in) [April 29th @ 4am] Plant 1- (12in.) 2- (10.5in.) 3- (23in.) 4- (16in.) 5- (11.75in.) [April 30th @ 3:30pm] Plant 1- (12.25in.) 2- (10.5in.) 3- (25.75in.) 4- (16.75in.) 5- (12in.) ______________________________________ The most current batch of nutrient mixes for was made this morning about (2am 4/29/20) for the 1st and second set of plants. The first set of plant's nutrients was made to 4gal of water. The mix is a ratio of (Cal-Mag/GHMicro/GHGro/GHBloom) It's mixed (for the 4gal) in order; 10mL, 5mL, 10mL, 10mL. 440ppm @ 98.5°F 890EC @ 2.2°F us/cm This new nutrient mix was applied for the first time tonight and will run about a week. I'm running a bit behind according to the GH schedule I was following due to stunting the growth I felt like over a couple issues to where I have them an extra week of veg nutrients. As I have defoliated them and they have seemed to take it pretty well, I'm hoping the increase in bloom nutrients will kick the buds into overdrive for production and the plants will start to thicken up again. The second mix follows the same order as the first set in regards to nutrient usage. This mix is only mixed to one gallon. It as follows; 2.5mL, 2.5mL, 1.25mL, 2.5mL. 500ppm @ 98.6°F 992EC @ 0.4°F us/cm This is mostly following the same GH nutrient schedule as the first set only about 2 weeks behind. These plants suffered from being in too small of containers for too long and I believe this stunted their growth. I've had them in suitable new containers for a couple days now and hoping this new mix of increased nutrients will bring them back to life a bit and get them back in schedule. I'm honestly not too sure still about the ppm and EC numbers but a few bud-dies have mentioned that it plays important roles in plant health. So until I can better research good numbers and how to control it for my set up, I'm at the very least trying to keep track of the data. I apologise about this large chunk of text! I hope you enjoy the diary anyway in spite of the fact. I'm loving the look of the buds and everything seems to be going great. Only a few months to go! 😎

...and here I am, at the end of this fantastic journey, with so much knowledge I have got in this process, including regarding myself! Fantastic!! I harvested one week early because I got some issues with mold! Thank you people for helping me when I got into some trouble hahaha Love you all! :-) Peace and freedom!

Week 8 in the books, cruising to the finish line two more hard watering each and 48 hrs of darkness starting Friday. Genetics: Natty Roots Seed Co Instagram: @green_house_lab

d39 ya no me caben dentro del Indoor, debajo del foco pequeño que tengo. Todavía se espera lluvia para la semana que viene, pero no caben y temo que alguna se ponga a florar por estrés, entonces las sacaré al exterior y las aclimataré. d40 Las he sacado a exterior , no les da mucho el sol, están a media sobra, esperemos que no se pongan a florar debido al cambio de fotoperiodo, son menos horas que en el Indoor, podía pasar, lo bueno es que las hemos sacado y ahora cada día están aumentando las horas de luz, mas o menos cada día tenemos 2 minutos más de sol, uno por la mañana y otro por la noche, amanece antes y se va más tarde poco a poco, si se adaptan bien, van a crecer mucho, pero si se ponen a floración veremos que hacemos, esperemos que no pase. Se le han puesto unas piedras para que se aguante la maceta, es de 2LT y con que haga viento la maceta se va al suelo y no queremos que pase eso. También se ha quitado el primer par de nodos LBP(Lower Branch Pruning), que normalmente salen ramas que no llegan a ser gran cosa. Se han quemado del sol, se ve que les da directo y no lo han soportado y se han secado, la tierra esta bastante seca al igual que muchas hojas, por suerte me he dado cuenta al cabo de unas horas, no esperaba que el sol ya pegase tan fuerte, las he cambiado de sitio y se han puesto donde no da el sol directo en ningún momento del día y están solamente a la sombra. Se han regado con un poquito de agua para que se recuperen, les he puesto una maceta más grande por fuera para que si diese el sol, que no le de a la maceta de dentro(2L) que es más pequeña y se calientan las raíces. d42 Se han regado y añadido aminoácidos(más Pro XXL 42% Aminoácidos) ya que eso ayudará a que la planta se recupere, por la tarde-noche les da el sol, no hay otro sitio que le de menos el sol directo, se han secado un pelín más la hojas, pero los brotes nuevos están blanditos y parece que las plantas seguirán creciendo bien.

-SOAKING SEEDS STARTED AT 4:15PM on 4/2/22 All of them sank by the next day with a little stirring of the water - most of them were floating before I stirred the water then they sank & stayed underwater. -PLANTING SEEDS STARTED AT 6PM on 4/3/22 Seedling Starter Soil: 1 Coco Coir Block (hydrated with 12cups aquarium water) About 5 cups Vermiculite 4Tbsp Down To Earth Starter Nutrients Mycorrhizal Fungi Spring Water - watering the hole with mycorrhizal before planting seed & then again after planted. -AFTER THE FIRST SPROUT ON 4/5/22 Turned on seedling clip light to blue only, dimmest setting @ 20%. Keeping light on for 18/6 6am-12pm - 4/6/22 INCREASED BLUE ONLY SEEDLING LIGHT TO 50% It seems like they were slightly stretching for light **watch for light burn on cotyledon leaves** -4/7/22 MORNING INCREASED BLUE ONLY SEEDLING LIGHT TO 100% The plants are stretching even more I increased light to full 100%, it'll have to keep an eye on them & make sure they don't get light burnt or topple over from reaching -4/7/22 AFTERNOON SWITCHED LIGHT TO GIIXER The two tallest plant cotyledon started to droop to the side so I didn't want to take a risk continuing to try the clip light only on blue @ 100%. I have the Gixxer on only veg at a distance of 10" away from the tops of the cotyledon leaves. I also cracked the lid & put an oscillating fan on low just to give them a tiny bit of movement to strengthen their stems because they'll be tall and weaker with stretching. *I tried using a new seedling light & it was a failure - they are now stretching due to that light. I switched back to my trusted seedling light & hoping they'll be back on track.*

Plant has doubled in size and has budlets growing all over. Top dressed at day 14 yo keep up with food and also did a heavy defoliation and removal of branches that was not to the top of canopy. Almost out of room vertically but I have faith I will squeak out this grow without light stress. No bugs, no wierd growth this run.

ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

This fantastic plant is growing very well, it has stretched a lot in a few days, tomorrow I want to perform LST otherwise I risk that it touches under the led😂😂. I did the topping because the plant has stretched a lot, I performed a small LST in order to make the branches grow more and let the light reach the bottom, the plant responds very well to the solicitations and immediately absorbs all the nutrients.

Finally the end of the sixth week. I had very bright, slightly yellow leaves because i had given too much light and too little fertilizer. The lamp was then turned down to 80W and raised to 50cm height, so that the plant could calm down again. I also corrected the amount of fertilizer. Now she looks happier again 😇 Thanks also to @Seedler, I "tucked" the leaves under the buds and it worked very well. 🌱🌱🌱 Grow Hard. Go Pro.

Yooooo what is up guys! Welcome back - in to week ten and the zkittlez has been harvested. Cloudy trichs all over and about 10/15% amber so went with a chop today. Wet weight of 628g for the plant roughly. Including a bit of stalk weight, which I’m chuffed with. 🙌🏼 She’s on to dry now, so stay posted for post dry weights. I’ve taken off the majority of fan leaves but left all the sugar leaves for a dry trim and to help slow the drying process. The Runtz still has a few days or weeks left in her. Just waiting for those pistils to stop sprouting and some further clouding up of the trichs and then chop chopppp! Thanks for stopping by 🤟🏻

Hello everyone 😎 Week 2 of flower for the strawberry banana auto from Fast Buds 💥 She grew fast with beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Mars hydro SP-6500 60% Have a nice day 😋

Hello Diary, We start with a new round. I am continuing with F1 strains since I am delighted with Medusa F1. This time I will have three different strains on the "Farm" Apollo, Milky Way and Titan. I will keep separate diary for each strain, and this one is intended for Milky Way F1. First, here is some information about the strain itself. MILKY WAY F1 As one of the first true cannabis F1 hybrids, Milky Way F1 is an autoflowering variety stemming from multiple inbred lines. The result? Unparalleled uniformity, impressive resistance to disease, great productivity, and flavors and effects that will inspire you to sow these seeds again and again. Milky Way F1 arrived in the cosmos after breeders crossed several highly inbred genetic lines that share a heritage with Blue Mammoth, Blue Dream, and Sin Tra Bajo Auto. Milky Way F1's parent varieties passed down a complex mix of terpenes, including myrcene, farnesene, caryophyllene, pinene, and limonene. Together, these aromatic molecules converge to create dank aromas and flavors of metallic Skunk and citrus. As a result, Milky Way F1 holds the title of the most aromatic cultivar in our F1 range. As far as effects go, this F1 hybrid will catapult you into orbit with high levels of THC. Expect a warm and fuzzy body high perfect for the evenings. Trace levels of CBG and soothing terpenes will help curb the peak of the high to keep things chill. Flowering time - 42-45 days SET-UP ON MY LITTLE FARM: Box - Secret Jardin DS120W 120x60x178 Lights - MIGRO 200+ Ventilation - TT Silent-M 100 Filter - Primaklima filter PK 100/125 Fan - Oscillating Koala Fan X 2 Humidifier - Beurer LB 45 Soil - BioBizz Light - Mix Pot - 11L Air pots Seed - Royal Queen Seeds Nutrition - RQS Organic nutrition I can now officially start the journal. 20/04/2023 Planting plants. As usual, I prepare everything I need for planting in advance. I still use Air-pots because they are really great. For the soil, I used BioBizz - Light Mix, which I filled 2/3 of the container and then added the Organic booster in pellets, Mycorrhiza and Rhizobacter. I mixed everything together well with the soil and filled the container to the top. I soaked the earth well with 2 liters of water, made a small hole, put the seed and lightly covered it with earth. The conditions on the Farm are satisfactory, the temperature is around 25 degrees while the humidity is around 50%. I think that after sprouting I will put a humidifier to increase the humidity. 23/04/2023 I sprinkled some water on the surface of the earth to let them know where they should go. 24/04/2023 Milky Way F1 sprouted like her other two roommates. 26/04/2023 First watering. I regulated the p.H. of water at 6.0 and watered the plant with maybe 0.5 liters of water. That's all for this week, see you soon.

Everything is going good, buds are getting purple. Smell is very sweet, and is very similar to LSD-25 smell. Gonna cut leaves in coming days. Day 50 - 5L with nutrients. Day 55 - Cut a lot of leaves, left plant completely naked. I think it will need 3-4 weeks until harvest, so its good time to defoliate. 5L with nutrients. Peace.

Why hello we are here now with the Payapa Bomb x Cotton Candy auto! I had some slight issues with the germination she took a bit longer than expected! And I lost pictures :( but we are at the end of 1 week of veg! She is full seedling turing into a bigger girl everyday! I have gave her some light nutrients just a root drech, some mycorrhizal for the roots! Im excited for this grow, I've never done a fast flowering plant before! Im assuming the flowering time will be faster but I can keep her in veg a while to get the plant big we will see!!!!! Mmm any ideas? Lets go papaya!!!

One of the plants doesn't look so good, looks like is related Cal/Mag deficiency but I added it after 10 days from seed so not sure if I had to add more or is something else

I'm really proud of this for a second grow! For the amount of space and the light that I'm using, i feel like my buds should stack better but at least I have real goals to meet for the next grow. I'm not looking to get lbs, but I do want great quality flowers that are visually stunning. I would DEFINITELY recommend Native Sun Genetics to anyone, beginner to advanced! This isn't a hi-yielder to start with anyway, but it's still one to look for!

The boring part at flip where ur waiting to see something happen lol