Les pompoms commencent a se former belle structure de cette plante. Boit énormément. Les engrais se mettre en marche et cela fait une énorme différence.

Smell got more intensive and Ladies are more thirsty At day 8 of flowering we thought the plants are a bit too small so we gave them more space to the LED, about 70cm with 200watts Also they got 4ml/l of bioheaven

Last week the plants grew looking very healthy although I still have a feeling the low humidity is slowing their growth, by the end of the first week I started raising the EC to make the increasing for this week smoother, run-off EC is substantially increasing so I will start to fertigate them twice a day for this week.

42 days into my project - "Girl on the balcony on the north side" she is already blooming :) she looks really good, knowing what conditions she has to endure, this week there was not much sun, there was a lot of wind and rain, I used a little LST for the girl, the girl drinks = every other day 1.5 liters of water 6.3 ph, every 3rd watering I give biobizz nutrients :) good luck to everyone :).

Easy grow, she don't need much attention 💪

Week 5 for the smoker week 6 for the BMSG seed bearing SFV

Pure Ice cream clone is doing great. She has grown rather large for the small potter. I will be switching her to flower in a few days. She will also get some training, and cleaned up some. Everything is going good. Thank you Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

High! ============= 2020-0518 ============= 300ml each, starting to drink much more. ============= 2020-05-19 ============= The smaller one need no water so i added 120ml on the 3 others. They will probably all need equal watering tomorow, Big cleanup, vaccum and washed the foor, Rethinked the wiring, much cleaner and managable. Camera placement have changed for better angle. Corner are not a good idea :D Added some tape to fan junction seems to add some extraction power. %RH and Temperature stable. I have added a weather API (openweatherAPI) to my controler. I monitor external condition. Can compare external eat peak with tente peak(if happend) LST and Defoliation continue, new colas are starting to get some heigh. Big LST job comming in the next day. ============== 05-20 ============= Worked on my LST. Result is great :) %RH stable at 60 when the extraction fan if off. 55 % when the fan running. Move my temperature down to 25. Reachin 25.5 max Added a 24hours graphic for RH and Temperature. Whole kit power consumption incluing the controler is around 4.9kWh per day,50cents ================== 05-20 ================= Work a bit on LST and cut a couple of leaf this shit is out of control :D Im gonna add a 2 layer/circle tomate tutor to deal with the heigh and support all this. All 4 receive 200lm of fertilizer =============== 05-21 ============================ Everybody receive 300ml of fertilizer ======================= 05-22 ====================== Everybody receive 300ml of fertilizer except the litle garden dawf, only 200ml. LST and defoliation continue. ============= Software update ===================== Greencam: Getting the cam in a ''always good'' position is not a easy task. Thinking about top shot only. For now i'm doing 1 snapshot every minutes for 16h (960snapshot) Modified PNG files names to follow a 4 digit pattern 0001,0002,etc. Easier to reassemble the whole thing in a 60secondes video for the whole day. ============== 05-23 ================ Planning to build a far-red/initiator Everybody receive 200ml of clear water.

here we see how the girls are advancing, the buds are becoming clearer and clearer which makes us feel that it will be a decent harvest at least, we cross our fingers.

19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. I have removed all LST equipment from both PPP1 and PPP2. I'm going to let them grow up now, and I plant to implement a Scrog net, if they get any taller, which I hope they will. However they are most likely finished with their final stretch. My mistake, I went too hard on the LST. Thanks for checking out my diary 🍃 ✌️

A bunch of deficiencies coming along.

Week 2 flower - no issues, still waiting on cotton balls. ***notes: nutes at 2.5tsp./10L - no def. Or burn in dwc. All of em are lookn perfect. Cut back heavy fan leaf growth this week.

Week three the girls are doing well , getting stronger day by day, and starting to thrive

🌿🔍 Week 8: Aroma, Colors, and Amazingness! 🌿🔍 Hey there, fellow growers! It's time for another thrilling update on my cannabis journey: 🌸 Aromatic Delight: As we reach the end of week 8, the aroma in my grow space is absolutely enchanting. The scents have intensified and become truly captivating. 🌬️👃 🌈 Vibrant Colors: The plants are flaunting their vibrant hues as the flowers continue to mature. The leaves exhibit beautiful purple hues, and The Queen plant is adorned with striking orange and red hairs. It's an absolute spectacle! 🌺🎨 💧 pH and TDS Levels: Throughout the entire flowering stage, I've maintained a steady pH level of 6.33. That's fantastic news! In terms of TDS levels, they currently stand at 750ppm and 1150ppm, providing the much-needed nutrients for your beloved plants. ⚖️🌱 ⏳ Progress Update: The Queen has proven to be a fast finisher, reaching the impressive milestone of 49/56 days. She's now completely ready to be harvested. It's time to celebrate! 🔥 🍪 Oreo Big Stuff: Although the Oreo Big Stuff was expected to finish around the same time as The Queen, it seems she needs a few more days to reach her peak. Hang tight for another 2/3 days, and she'll be ready to harvest as well. Patience is key! 🍪⚡ 🌿 Zweet Og: Ah, the beloved Zweet Og! This beauty emits an incredible OG gas funk smell. I absolutely adore it! The estimated flowering time for this strain is 63-70 days, and she still needs a little over a week to reach her full potential. Keep an eye on her progress, as she's worth the wait! 🕒👀🌿 🧐 Drying Dilemma: Unfortunately, I've encountered a challenge with drying The Queen. She's currently positioned on the back left side of the grow tent with a scrog setup, making it difficult to remove her without disturbing the others. It's a tricky situation indeed! 😬🌿🏋️‍♂️ 🌱 Future Plans: Despite this dilemma, I'm overall thrilled with the progress of my grow. No hermaphrodites or other issues have surfaced, which is fantastic news. I'm even planning to embark on another run with The Queen. I already have six clones ready to transition into flowering immediately after this run. Exciting times lie ahead, especially since it'll be my first time flowering clones! 🌼🌿🌿 That wraps up this week's update. Stay tuned for the final steps as we approach harvest time in just 3/5 more days for The Queen and Oreo. I have 5 days to come up with a solution for the Zweet Og's flowering space. Stay elevated and keep growing happily, my fellow growers! 🌿💪🌿✨

hey guys, week 12! all is going smoothly just giving her water and reducing gradually the ec. She's gaining some weight and the bud are very well structured even if they are not as big as they could because of the week lost to recover. do you guys think it will be ready by the royal queen seeds instructions or because the week stunted do I need to wait a week more? thanks all guys, keep Growing 👍

Topped all 4 plants once they developed 4 nodes, will be training branches out this time to open up the middles of plants

Gracias al equipo de Anesia Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁 Captain Future: Nuestros criadores en Anesia Seeds están siempre en busca de nuevas dimensiones en la genética del cannabis y están comprometidos a ayudar a dar forma al futuro de la cría de cannabis. Después de que nuestra Future # 1 fuera probada varias veces por encima del 37% de THC y se convirtiera en un éxito entre los dispensarios, teníamos claro que el viaje no podía terminar aquí. Después de numerosos intentos, encontramos el socio ideal para mantener o aumentar la potencia y llevar la experiencia de sabor al extremo. Esta variedad Premium puede cultivarse tanto en interior como en exterior. En el interior, las plantas tienen un tiempo de floración de 10 a 11 semanas y deliever rendimientos de 500-600g por metro cuadrado, al aire libre una planta puede producir hasta 800g 🚀 Consigue aqui tus semillas: https://anesiaseeds.com/es/product/captain-future/ 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 12: Última semana de engorde de este precioso micrófono antes de lavar raices, el aroma es increíble y la cantidad de resina se acumula por momentos.

Welcome back to the last flowering update week. My Unit Farm test light grow of the UF2000. My house strain has been flushing for last two weeks. Fading and deficiency signs are showing as they should. I will be updating a harvest video/pictures this week after I finish the two days of darkness in a few days. Plant smell wonderful as it has in past grows. The UF2000 light for 100 watts did good in my little test area. It did not have a breeze while growing, and temps were lower then my growing rooms. Not by a lot though. The UF2000 is a great light for the price. I will be continuing to use it, and recommend it if you are on a budget. I will be doing a test grow with the UF4000 in a few months, when I start my new photoperiods. Will likely add the UF2000 in the canopy with it at that time. Thanks again UNITFARMLED_Justin. Update: 3days after this post. Plant was harvested and hung to dry. Thank you grow diaries community for the support. The likes, and follows are greatly appreciated. Showing your support for fellow growers 🌱👍. Also would like to invite you to my YouTube channel for more cannabis related videos. Remember to smash that subscribe button. 😀 Happy growing everyone, and be safe out there.🌱🤜🤛

So... it happened Because of the lack of space and poor light I decided to defoliate them a bit.. No water the whole week, as the soil was still quite humid