MONDAY: First week of flowering nutrients: TUESDAY: Defoliated THURSDAY: starting to feed with 2ml Top Bloom + 1ml Top Candy Big One 1L sprayed + 2L water with Top Bloom Plant Three - accidentally broke the top of the main stem while doing LST - be careful, don't do it when in a hurry! It got bush again after less than a week, i think i am still waiting for the stretch, hope not too much.

Day 62-30/01/23 #1 harvested!!! Day 64-01/02/23 #2 harvested!!! Day 68-05/02/23 #3 harvested

it's harvest time 😀😀😀😀 check www.sr-organics.com for some topnotch 5 in 1 fertilizer! root, growth, bloom, micro-organisms, enzymes & vitamins all in one! CODE: "Unkraut10" for 10% Discount! 😊

Lots of growth this week and working to solve the humidity issues. I think it's probably because of the size of my pots but these girls just won't stop growing! I think I'm going to have to consider some defoliation for her next week. I noticed some rust spots on some of the leaves this week, I'm fairly certain that it's down to the humidity. Where leaves were gathering condensation they seem to have discoloured, probably because of magnifying the light - I'm just a beginner though so I'm happy for other people's opinions. I've kept feeding her a little bloom every couple of days, there was a little bit of yellowing to the tips of some leaves which I though could be down to nute burn but I'm not too worried about it at the moment. I think this plant has overtaken the Jack Herer now, she seems to be flowering a lot more. She smells divine - really strong citrus notes, I think she's going to be tasty! To fix the humidity issues I diverted the extraction duct to another room which seems to have made a big difference, RH is now consistently under 57% and usually around 55% - still not ideal but I don't think I'll get it much lower. I've moved the fan so that there's plenty of air moving over the canopy - hopefully enough to keep away the mould as the grow progresses.

💩Holy Crap Growmies We Are Back💩 So what do you say we have some fun 👈 We got some EXOTIC SEEDS 👉 👻👻👻MONSTERMASH👻👻👻 😛 Well my friends we are just at the 49 day mark and as you can see shes doing great 👈 👉 So folks , she's been quite the little monster , and she's building some nice buds 👈 Shes the only one that hasn't had any issues 😎 Lights being readjusted and chart updated .........👍 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Everything is going smoothly, the buds are getting bigger day by day All the girls are bug free, they are still looking green The G13 has the strongest smell followed by the Runtz and the GDP doesn’t smell like anything for now

Day 56 of flower. The cookies is fattening very well. I Will start the flush this week because kannabia's schedule says this strain flower in 56-63 days but i Will flower this lady at least till day 70. The smell seems day by day more citrus-like.

————————————————————— WEEK 5 / DAY 29-36 Mars Hydro FC-E3000 Floragard Professional GrowMix 11L Plant bag made of fleece Light: 55cm / 55%; Schedule: 24/0; PPFD: 650 umol/m2/s 20° C - 70 RH 500ml per Plant PH 6,5-7 2ml BioGrow; 0ml TopMax ; 0ml BioBloom 2ml CalMag #1 Blueberry Automatic #2 Blueberry Automatic Fan, extractor and pump ON 24/0. ————————————————————— -17.02.2025 The fourth week of vegetation begins. The plants are looking very good so far and I'm happy with the grow so far. There have been no significant complications so far. The lowest few leaves have been removed and light LST applied using plastic benders. -19.02.2025 The plants get their typical “white hairs”, pre-flowering has started. -23.02.2025 The plants are doing well, I haven't been able to look after them for the last few days. But they have survived. The fourth week of vegetation is coming to an end and as you can see the plants are starting to flower.

Flushing 💧

Just started my flush. My first time using a flushing agent . ran 2 gallons of water Through with 1 tsp of sledge hammer in each. manufacturer recommends 2 teaspoons I’ll move up Depending on how it acts to this dose. Runoff was at 568 ppm and 5.8 ph. I don’t know if I should have kept running water through Or if this stuff eats up the PPM’s Without overwatering I don’t know we’ll see. Open to advice . Overall she is doing well

Buds have really shot out since I last checked them smells like lemon and sweets with a subtle sour to it smells unreal can't wait for this to be done

Day 80, 2nd of December 2020: Hi there! Ladies are cool everything is alright. In one week buds strated doubeling and the developement is dope haha. The 2 Zamnesia ladies are pretty Gelato is so nice bushy and the smell is great as well. Kalini Asia will be a green pheno I think and she my be hermied a bit on me.... I am still waiting to see I see some strange develepement lets say. Sweet Seeds girls are dope unfortunately Red Mandarine and Tropicanns poison don't show any sign of colouting yet but it is okay even if they green phenos.... It may happen in the end of the flowering cycle let's see. Basically that's all I wanted to share. Oh yes... this one: All good the lamp is now on 11 hours and off 13 hours. Every week 15 minutes was taken off and after 4 weeks here we go. Strated 12/12 and now 13/11 wanted try to imitate the nature as the light days are getting shorter. Fertilization has changed no more epsom salt from this week and I will stop giving nitrogen as well from next week. Great job Sweet Seeds and Zamnesia! Nice genetics :) Lovely plants!

Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - bud developing is going further - really a lot of trichs already on buds and on the sugar leaves itself - see night picture - in general plants looking a little hungry so gonna increase Plagron Bloom from 4ml/l to 5ml/l and see if further adjustment needed - started Plagron CalMag (5-5-0) for all - stopped with Power Buds + Sugar Royal because of their high N to compensate the CalMag ___________________________________________ --- 🌱 Strain --- 🏷️ SWEET CHEESE by Sweet Seeds https://sweetseeds.es/en/photoperiod-dependent-seeds/48-sweet-cheese.html ---💡 Lighting --- 💡LUMATEK ZEUS PRO 600 https://lumatek-lighting.com/zeus-600w-pro-29/ --- 🥗 Nutrients and Feeding * 🍸 PLAGRON Algae Baseline grow/bloom + Additives: Power Roots, Sugar Royal, Pure Enzym, Silic Rock, Power Buds, Green Sensation * 📅💪 baseline grow/bloow: 4ml/l & additives: 1ml/l each https://plagron.com/de/hobby/produkte --- 🏭 Grow Setup --- * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) & Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! don't forget to check out my Instagram: budboutiquee <3 - Bud Boutique

Het is mijn eerste kweek, voor mijn eerste keer vind ik dat alles vrij goed is verlopen. De white widow van dp heeft zeer goed gepresteerd en heeft mij een mooie oogst bezorgd. Na het drogen geef ik een recensie over de smaak en geur.

This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)

Day 63 - Flowers just starting. They're looking nice. Through the week I've chopped quite a few leaves off her to allow light penetration.

Ready for the chop