Recommended
Processing
Likes
Comments
Share
@LovelyT
Follow
Definetly indica dominant. This pheno is looking amazing by far!!! Starting to get a little smell from her😎. Happy growing!!
Likes
13
Share
Not a heavy yielding lady. Which is not a surprise due to the cookie genetics. She is super frosty and stick. Her colors are constantly changing for the better. I pollinated her with “Purple Punch x Cuvee “ And will soon have my own Cookies strain........ Purple GasFace Cookies......
Likes
1
Share
Likes
16
Share
@cherokee
Follow
Всем привет. Я назвал этот дневник "Old tree" и это не просто так, этому кусту 13 месяцев! Также интересный факт это растение уже дало урожай после чего я решил оставить 30% от растения, обрезать ему корни и пересадить в горшок поменьше после чего отправил его на вегетацию 18/6 и оно начало вегетировать. Также с этого растения мне получилось взять много хороших клонов, но теперь старушке пора на пенсию ее работа выполнена! Надеюсь это будет интересно.
Likes
8
Share
@Weedinho
Follow
I’m blacking this one out for 2-3 days and then I’ll harvest.
Likes
8
Share
Day 49 TG1 is starting to dense up already, super even canopy and even size buds everywhere. It’s so small compared to my other plants I have it on a shoebox to get more light. TG2 is looking better now, it has healed well from my abuse last week and is producing buds everywhere, super tight spacing, I haven’t seen any more pollen sacs. Thanks for checking out my grow!
Likes
10
Share
@Fonzo412
Follow
For the germination process I ,First put the seeds in distilled water ph 6.5 for 24 hours . Let them float for the first 12 hours in a warm (dark) place . I used my grow tent temperature inside was 75 degrees and 50%humidity through out the entire process . After first 12 hours I poked the seed to the bottom of the cup and let them set for the finale 12 hours . After the full 24 hours was up . I placed the seed’s on a plate with paper towel first and second I added water to the paper towel (moist not wet) and placed a seeds on top with another moist paper towel and let go back in the tent for 2 more days After two days the tap roots appeared for each seed so I potted 2-3 into there finale medium . Didn’t have enough soil for all 3. Once potted. Plants 🌱 are given 18 hours of light 💡
Likes
48
Share
Stacking up on the sticky icky goo shimmering & glistening like she sparkled with glittering magic powder just beautiful...heres a video for ya'll enjoy.💚
Likes
12
Share
@Ninjabuds
Follow
I wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smile
Likes
6
Share
Finally harvested this girl at days 68. She is heavy. After cutting the ties, this girl just fell over from the weight! Very minimal larf! Even the lower bud sites are nice! Can't wait to see what she weighs once dry! First DWC grow was an overall success!
Likes
23
Share
@Weedinho
Follow
Not much more work to do... I did some light defoliation today to avoid any popcorn buds and I think that’s it until harvest for all my girls. I’ll just keep watering them. - The critical is the most advanced one... I’m thinking to harvest it in around 2 weeks... so I’ll be starting flushing soon. - Northern Lights & Moby D have developed many stems and they are looking very even in height throughout the plants. They are not half the height of the Critical, but still have some additional weeks to go
Likes
6
Share
This one was Baked in Paris by PerfectTreeSeeds, grown with AptusPlantTech only! Check the other weeks to see the ones with GreenPlanetNutrients! Great gassy notes, awesome structure, beautiful colours. I know this one came out a little too early, but I was having problems with humidity and also with smell so I decided to take 'em all out at the same time. Forgot to take pictures of her on the drying screen, will update soon (:
Likes
20
Share
Today i cut down the males. they have pollinted the whole area, the rest of the is into the refrigerator they had lots of pollenpowder its just everywhere in the roo--- means i have to do a very good cleaning
Likes
7
Share
She got defoliated this week…I’m in love with her branching structure. My first time growing with extra hours of light to extend veg is working.
Likes
16
Share
Seedling managing 93F 30%RH, around 20 DLI. Vpd is in the 3's. No I don't recommend. Signum Magnum. "A great sign appeared in the sky a woman clothed with the sun with the moon under her feet and on her head a crown of twelve stars. Sing ye to the Lord a new canticle: because He has done wonderful things. Glory to the Father, and to the Son, and to the Holy Spirit As it was in the beginning, and now, and ever shall be, world without end." The plant nutrient nitrogen exists in forms with both positive and negative charges. Ammonium (NH4+)(immobile in soil)(Cation) has a positive charge, while nitrate (NO3-) (highly mobile in soil)(Anion)has a negative charge. Nitrogen is unique among plant nutrients in that it can exist in both positively charged (ammonium, NH₄⁺) and negatively charged (nitrate, NO₃⁻) forms in the soil. This makes it a special nutrient. In that it is responsible for providing balance for reactionary trade offs when it comes to ph. Because ph itself in the medium will always slowly drift towards acidicity, such is nature. 80% of nitrogen should be nitrate and no more than 20% ammoniacal nitrogen. Ca, mg, and K are the big 3 cations related to soil composition, pH & base saturation. When nitrogen is in the form of ammonium, it can compete with calcium, magnesium, and potassium for absorption sites in the plant root. This competition can lead to a reduction in the uptake of these other essential nutrients. Nitrogen, particularly in its nitrate form (NO3-), can increase soil acidity, which can also affect the availability of calcium, magnesium, and potassium. The form of nitrogen applied (ammonium vs. nitrate) can influence its interactions with other nutrients. Ammonium nitrogen can have a more pronounced negative effect on the uptake of calcium, magnesium, and potassium compared to nitrate nitrogen. Common forms of ammonium nitrogen include ammonium ion (NH4+), urea, and ammonium compounds like ammonium nitrate, ammonium sulfate, and ammonium phosphate. Common forms of nitrate nitrogen include potassium nitrate (KNO3), sodium nitrate (NaNO3), calcium nitrate (Ca(NO3)2), and ammonium nitrate (NH4NO3). Phosphorus is an essential plant nutrient, and its availability in the soil is strongly linked to the presence of oxygen. Plants primarily absorb phosphorus as phosphate (PO4), and oxygen is a key component of this molecule. Furthermore, the availability of phosphorus in the soil can be impacted by factors like soil aeration and temperature, which in turn affect the oxygen supply to the roots. Phosphorus uptake in plants is most critical during the early stages of growth, particularly within the first few weeks of plant development. Young plants actively growing tissues have a high demand for phosphorus. They may absorb up to 75% of their total phosphorus requirements within the first few weeks of vegetative growth, with up to 51% of uptake happening overnight, primarily in the first few hours or early nightfall. ⑨Anaerobic root respiration, or respiration without oxygen, is detrimental to plants because it's less efficient and produces toxic byproducts, leading to reduced energy production, nutrient uptake issues, and ultimately, root damage and plant stress. ⑨Anaerobic respiration, unlike aerobic respiration, doesn't utilize oxygen as the final electron acceptor in the electron transport chain. This results in a significant drop in the amount of energy (ATP) produced, which is necessary for various plant functions, including growth, nutrient uptake, and maintenance of cellular processes. ⑨In the absence of oxygen, plants produce byproducts like ethanol and lactic acid during anaerobic fermentation. These byproducts can be toxic to the roots and inhibit their function, ⑨When oxygen is depleted in a medium, the pH tends to decrease (become more acidic) due to the production of metabolic byproducts. This is particularly relevant in biological systems where aerobic respiration relies on oxygen as the final electron acceptor. ⑨When oxygen is scarce, plants may switch to anaerobic respiration. This process produces carbon dioxide (CO2) as a byproduct. ⑨CO2 dissolves in water to form carbonic acid (H2CO3). This acid lowers the pH of the medium, making it more acidic. ⑨Anaerobic conditions can impair a plant's ability to regulate its internal pH, leading to a drop in cytoplasmic pH and potentially cellular acidosis. ⑨The change in pH can also affect the availability of certain nutrients to the plant, as pH influences the solubility of micronutrients like iron, manganese, zinc, copper, and boron. ⑨The lack of oxygen in the plant medium leads to a decrease in pH due to the production of carbon dioxide during anaerobic respiration and impaired pH regulation within the plant. In plant cells, cellular acidosis, a drop in the internal pH of the cytosol, is a significant stress response, particularly during conditions like flooding or hypoxia. This acidification can be triggered by a decrease in oxygen levels, leading to the production of metabolic byproducts like lactic acid and CO2. The plant's ability to tolerate and recover from these conditions depends on its cellular mechanisms to regulate pH and mitigate the effects of acidosis. When plants are subjected to low oxygen environments, such as those experienced during flooding, anaerobic metabolism, which produces lactic acid and ethanol, becomes the primary source of energy. This can lead to a build-up of these acidic metabolites in the cytosol, causing a drop in pH. OXYGEN Atomic oxygen (single oxygen atom, O) is the lightest form of oxygen, as it has the lowest mass of the oxygen molecules. Oxygen also exists as a diatomic molecule (O2) and an allotrope called ozone (O3), which have higher masses due to the number of oxygen atoms combined. Atomic Oxygen (O): This refers to a single oxygen atom, which is the most fundamental form of oxygen. Molecular Oxygen (O2): This is the common form of oxygen we breathe, consisting of two oxygen atoms bonded together. Ozone (O3): This is an allotrope of oxygen, meaning it's a different form of the same element, consisting of three oxygen atoms bonded together. Since atomic oxygen has the fewest oxygen atoms, it naturally has the lowest mass compared to O2 or O3. Ozone (O3) Lifespan: Ozone has a relatively long lifespan in the stratosphere, particularly at lower altitudes. For example, at 32 km in the middle latitudes during spring, ozone has a lifetime of about 2 months. Oxygen (O) Lifespan: Atomic oxygen, on the other hand, has a much shorter lifespan. At the same altitude, its lifetime is about 4/100ths of a second. Ozone-Oxygen Cycle: The ozone-oxygen cycle involves the rapid exchange between atomic oxygen (O) and ozone (O3). UV radiation can split molecular oxygen (O2) into atomic oxygen (O), which then reacts with O2 to form ozone (O3). Ozone can also be photolyzed by UV radiation, creating atomic oxygen again, which can then react with O3 to reform O2. Dominant Form: The partitioning of odd oxygen (Ox) between ozone and atomic oxygen favors ozone in the lower stratosphere. This means that a much larger proportion of odd oxygen exists as ozone than as atomic oxygen, especially in the lower stratosphere. Recombination: Atomic oxygen has a high energy and reactivity. When it encounters another oxygen atom, they can combine to form O2. This process releases energy, contributing to the heating of the atmosphere. Ozone Formation: Atomic oxygen can also react with molecular oxygen (O2) to form ozone (O3). Ozone plays a significant role in absorbing harmful UV radiation. Other Reactions: Atomic oxygen can react with various other molecules in the atmosphere, like nitrogen (N2), water (H2O), and carbon dioxide (CO2), forming different compounds. UV light below 240nm (peak 185nm) creates ozone (O₃) through a process called photolysis, where UV light breaks down dioxygen molecules (O₂) into single atomic oxygen atoms (O). These single oxygen atoms then react with other oxygen molecules to form ozone (O₃). Specifically, UV-C light with wavelengths shorter than 240 nm can cause this photolysis. UV light with wavelengths between 240-280 nm, (peak 254 nm) breaks down ozone (O₃) into dioxygen molecules (O₂) and atomic oxygen atoms (O). 280nm does not have the energy potential to break apart the stable bond of (O₂) into enough (O) to make (O₃) At ground level, atomic oxygen (single oxygen atoms) has a very short lifespan. This is because it's highly reactive and quickly combines with other molecules to form stable diatomic oxygen (O2) or other compounds. While the exact timeframe varies depending on the specific circumstances, its lifespan is typically measured in nanoseconds or picoseconds.
Likes
15
Share
Right in the middle of flower now, I can basically see the buds getting bigger each day. Gave them a big drink of Aloe Vera Juice, its high in silica and trichomes are up to 86% silica so... Reeks of lemons this one does.
Likes
11
Share
@Coughy
Follow
Day 15- rez changed. 37 grams Calcium Nitrate 31 grams Jacks Hydroponic 32.6 grams in Magnesium Sulphate 45mL Mighty Bloom Enhancer 100mL Headmasta 50mL Purpinator 50mL Sweet Citrus 100mL Humic 100mL Fulvic PPM 1300 PH 6.1 Day 17 Added 20 litres water Added Some magnesium sulphate Reduced pH to 5.8 PPM 1250 Day 18 Added 20 litres water Added 33 grams of Cal-nit 22 grams of Jacks 11 grams of Magnesium Sulphate pH 5.8 PPM 1250 Humidity 60% New Meijiu 550 V3 arrived today. Installed. Heat in tent went up quite a bit... was 89F when I noticed, increased exhaust fan to 80% from 60%, dropped to 85F. Not liking the noise increment on fan. Oh well. Light is killer tho. I like it. Some pictures added. New wattage on LED lighting for 4x8 tent at 1,475 actual watts.
Likes
144
Share
@roro_204
Follow
Out of the 155 plants one room is starting to get a whole bunch of yellow leaves. And yellow plants. It started after I used the fish emulsion. :S The other two rooms are looking very green and bushy. Continuing LST on most of the plants. The leaves grow in every week or so.
Processing
Likes
7
Share
Another rough week...high temps and horribly arid conditions, and still the grasshoppers appear every damn day! I'm beginning to think I have a root aphid problem. Mysterious Mg deficiencies for two grows. Also looking like phosphorous deficiency as well..no way... She's popping pistils now...just a few so far..