Likes
9
Share
@PhotonMan
Follow
04/23 500ml of solution, PH 5.8 04/24-- 04/25 500ml of solution, PH 6.3, 4ml bio-bloom + 3.5ml bud candy + 2ml bud factor X + 2 ml sensizym + 2ml B-52 + 2ml nirvana 04/26-- 04/27 500ml of pure water 04/28-- 04/29 500ml of solution, 4ml bio bloom + 3ml top-max + 2 ml bud candy (mll)
Likes
19
Share
@Eauderay
Follow
This week I have changed the 400w HPS lights for a 240w Leds, and I have seen great improvements for the rust burn that used to plague me for quite some times seems to have stopped and repair to the parts still viable started, now I know it was due to hight intensity and heat for 12h on those fan leaves that turned them dry and eventually burned them... I still have to watch out because those Leds are powerful and loaded with Deep red, IR and UV! They are at 45 cm the closest and 70cm the furthest no bleaching is seen so far, I am keeping a close eye on those leaves tip and if I see bleaching to those I higher up the lights for a while... I feel like I am dancing around those marvelous plants, sometimes pulling the lights or dimming them, tucking those fan leaves shadowing lower growth whenever I feel they need a break or a hand! Trying to be a cannabis whisperer lol Added 2 tablespoons of fish blood and bones to top layer with worm castings and bat guano a handful. Lots of spiky hair on one and the other those are curly. They look almost the same, lots of trichomes, at least 16% covered and smell kushy and flowery, very nice. Let's hope the leaves do not get worse and the repair continues, not to forget to offer a prayer to Marie Jane so all goes well! ☺️🌹❤️
Likes
6
Share
Processing
Likes
4
Share
@4F1M6
Follow
I started germination of 4 Gelat.Og beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! Some background information on my experience with Gelat.Og. I've grown this one out several times and I'm just absolutely in love with these genetics. One of the best terp pallets I've came across. Extremely creamy and rich aroma with a kush kick... majestic! She packs amazing bud structure and is a real branchy hauler. She packs a pretty large stretch, about 200% on average. Plus she has a bit longer of a flower time for a indica dominant... in my experience about 11 weeks. She gets a strong demand for more phosphorus mid flower. A good spike with the pk booster and shes happy as Larry! Another Seedsman masterpiece right her! Amped to dive In to this grow.
Likes
20
Share
Nice plants 2 totally different phenotypes, as one was already harvested, and the other isn't even half way of flowering after 10 weeks. Nice trichome production, great fresh and fruity smell, this plant is a pleasure to smoke in the end of the day. Dried her upside down hanging in a tent I have for the purpose, at 25c, 30%RH - Only removed fan leaves, no manicuring, been doing that as I smoke, noticed the bud lasts longer and with a better smell and you end up saving loads of time. Really happy with this smoke, smells like proper weed. Maybe was the best time I dried and cure(ing). Only problem is that I'm smoking more as it's so tasty ahaha. Good stuff, thumbs up! PS - I'll start looking for the "original" Zkittlez to try out and check the differences between them. Update: 12 April 2021 - Chopped down Plant #2 So, finally Saturday I chopped her down. She looked now ready and delicious, although I only notice yesterday how many seeds she has allover the place. She hermied in front of me without noticing, not good at all and need to start looking much better and in detail into the plants. Feel like an idiot now. Anyways, it was a full week! Emptied the grinder collector and pressed it down a little, makes a very nice smoke, light but pleasant, the kind of stuff it keep you going all day without the dumb effect. From all trimming made the bubble hash. Got a little too green as the 220micron bag's stitches slightly opened letting some contaminants in the final mix, hence the green color. This was a hit. in opposition to the grinder stuff, this sent me straight to the moon, really heavy stone effect, even thinking was hard. Reminded me those afghan/ moroccan balls we used to get back in the early 2000's. The weed itself it's still drying so the smoke report will be updated in there. 715g of fresh cut plant is good, let's see the potency and the seeds. Might turn it all into bubble hash, if I see it'll be an hassle to remove seeds. On an earlier bud I've cut and dried, smoked it and you can see pure white ashes in the bong. Ain't that a beauty?
Likes
17
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 I spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
56
Share
@Prilyfe13
Follow
March 22, 2024 Day 36 This week we are dialing in the light height and power level, as well as nutrient regimen. Training is the top priority during this last week or so of the veg stage. Everything else goes hand in hand. Banana Purple Punch A is suffering from nitrogen toxicity, so the nutrients need to be dropped from 12 ml to 10 ml after I dilute the current regimen with 8 ml cal/mag water. I have to wait another day or so before diluting the basins as they are nearly full still. She also had some of the top side branches pulled down. The top is pointing down and has been for the last day while the side branches are doing exactly what they are supposed to do. They are growing into an even level canopy with the top being just below them. This is exactly what the plant should be doing. Very happy with this outcome. The top on Banana Purple Punch B finally stayed down for the most part. It's reaching back up again, so I trained it back down. If the side branches don't start to reach, I'll have to top her. I'll give her a couple more days to see what happens. What's weird is that she isn't suffering from nitrogen toxicity while having the exact same nutrient regimen as her sister plant. She also seems to be drinking a bit slower than Banana Purple Punch A. I think it has to do with the different phenome. The soil seems to be just as wet, but the bottom of the container isn't as wet as the other plant. The reservoir is also nearly full where the other is about 3/4 full. Not much difference, but enough to notice. The side branches are all level with each other with the top being about an inch taller. Don't get me wrong, she is beautiful and most likely will have the best structure of the 2 plants. I'll also be taking off the massive fan leaves on the stem in the next day or so. Even maybe this afternoon. I'm just concerned about the nitrogen toxicity. Is it enough to cause too much stress, or is it fine while I work on diluting the excess nitrogen out? I might just do it anyway and see what happens. As I've said before, I plan to do everything the exact same, but I'm starting to think these two need to be treated slightly differently. Like the possibility of having to top Banana Purple Punch B, or the nutrient intake difference between the two. The light power is now at 90% with the height staying at 24". I need to measure the height of the plants, but I'm guessing they are about 10" with training underway. I don't really expect them to grow too much taller until the flowering stretch. Until then, I'll continue to train them down. It's still snowing and freezing out, and the tent is still suffering from it. The temp went all the way down to 66° last night and won't climb over 75° today. I have the heater set to 78° and it's keeping the room at 75°, but the tent is still under 75°. It makes no sense. The humidity is kind of high as well. It is stuck at 57% to 58%. It's not high necessarily, but it's higher than what I want. I might put in my dehumidifier to help with the temp mostly and the humidity should drop just a bit. I'll see how it goes for the day. Grow System Environment: Temp: 72.4° RH: 56.5% VPD: 1.16 kPa March 23, 2024 A bit to do today. I was going to water, but the reservoir for Banana Purple Punch B is still half full. However, the reservoir for Banana Purple Punch A is nearly empty. I definitely believe it has to do with the phenotype. Gonna have to focus on each plant separately from now on. I'll refill Banana Purple Punch A tomorrow when the reservoir is almost dry. Trimming finally happened today as well. I removed all the main stem leaves. That's it and there is tons of open space now to fill in. Banana Purple Punch A looks awesome now and had a couple adjustments done. A perfectly level canopy. Banana Purple Punch B looks great as well. She opened up quite nicely. However, she is still a tiny bit bushy. No reason in removing more yet. The light was adjusted today. The DLI is sitting perfect at 42 mol/m²/d. However the light is at 26" now. To be honest, I'm happy with the footprint. Excellent coverage wall to wall. The environment looks pretty good today. 75° and climbing up to 76° to 77° by the middle of the day. The humidity is also pretty good hanging out between 57% and 58%. The real concern is still the night temperature. Last night it was down to 64° because it's that cold out. Other than that, they grew about a half inch last night. Not much upward growth, but that's the goal. Lots of outward growth though. Grow System Environment: Temp: 72.6° RH: 57.0% VPD: 1.15 kPa March 24, 2024 What a day. Both ladies were massively trained. The branches on Banana Purple Punch A were sticking too far out, soni rounded them back in around the rim of the container. Suffice it to say, the tent is completely full. The training opened up tons of light space. Auxiliary branches were tied down as well. Banana Purple Punch B didn't need as much training, but I did get the top to pull down again. The side branches are still pretty tight. They are definitely over the container rim, but not as much as her sister plant. So not a ton to do today. It will take off soon during the flowering stretch and then training will be needed. Speaking of full tents, I'll be adding the trellis in a week. I think I'm gonna need it. I also learned how to super crop, so I can use that technique if need be. However, I'm not much of a fan with the trellis. My last harvest had the trellis stuck inside the plant until after drying and I could cut the plant up. Anyway, we shall see what happens. Both reservoirs got a half gallon of 8 ml Cal/Mag. That should reset the nutrient intake so I can start the 10 ml dose next watering. Differences between the two plants are pretty obvious. From the plant structure to even the roots. Banana Purple Punch B has no roots showing while her sister plant is showing roots now. Both plants are super strong and will do quite well. I wonder if the buds will be structured differently as well. I didn't need to move the light today after I trained the plants down. It's still at 42 mol/m²/d. Based on their current growth and the health of these plants, I'm expecting them to grow up to 3 ft. At least that is the hope. I'll take 4 ft, but no taller. That's all the tent can handle. I don't expect these to be short based on their growth and hardiness. So at minimum, we can see a couple 2 ft plants. It's 20° f out today. The tent temp is hanging out at 75°. The humidity is a bit high today. Hanging out around 58%. It should drop a bit later on and the temp should increase by mid day. Grow System Environment: Temp: 72.5° RH: 57.3% VPD: 1.14 kPa March 25, 2024 So I know it's the middle of the week, but I forgot to rotate the plants around until today. So I rotated them out. Now Banana Purple Punch A is in the rear quadrant with Banana Purple Punch B back in front. They are still very different. While Banana Purple Punch A is stretching with an open canopy, Banana Purple Punch B is still tight even with the stretch starting. The canopy is already getting dense from the previous light defoliation. I'll definitely have to take more leaves off in the coming weeks. In fact, both of them have massive leaves that will surely be a nuisance in the near future. Both plants are in the flowering stretch now. I thought it was pre-flower last week and I was right. Now they are both flowering and I'll be starting the flowering nutrients next week as scheduled. I didn't move the light again today. The side branches haven't caught up to the very tops yet. The canopy is still level, just need the auxiliary branches and side branches to start stretching. The DLI increased to 43 mol/m²/d, but flowering means a higher DLI. So I'll be increasing that to 45 mol/m²/d at the start of next week. It's only like 3 days, so it should be perfect for the stage the plants are in. I'm still keeping a minimum of 22" to the canopy, but will hold over 24" for as long as I can. As I said yesterday, I believe I can expect 3 ft from these ladies. They have been stretching, but the top branches are also stretching, so they have to be tied down as they get long enough. Speaking of branches, I accidentally half snapped one of the top branches on Banana Purple Punch B. No worries though, I'm not concerned with this. Every snap or partial snap I've had always ends in a better plant. Not to mention it's a side branch and not the top, so we're good. As for watering, both plants are very different. Where Banana Purple Punch A is taking in about a gallon every couple days, Banana Purple Punch B is taking half of that. There still aren't too many roots coming out yet, so that could be the cause of the slow down. As the system works, it only provides water as needed by the soil and plant. So currently , there isn't a reason to flood the soil. According to the plant anyway. The soil is perfectly moist and the plant is perfectly happy. The good part is, when the roots do hit bottom, the plant will really take off. So I can only assume my watering technique worked as I planned. Back to Banana Purple Punch A. Her water intake is fairly impressive, especially at this age. She's still young and has a lot more growing to do. This may be a gallon a day plant in the upcoming weeks. The environment is still a bit off. Temps are still low and the humidity is still high. However, the VPD is in range. It will need to increase by next week, but that shouldn't be a problem with this cold front almost over with and spring fast arriving. Currently the temp is hovering at 73° and the humidity is around 59%. Definitely not ideal, but not much I can do at the moment. I may add my small dehumidifier to the tent to see if that helps. The high humidity is definitely not from an external source. The humidity in my room is down to 22%. So it's not that issue. It's the plants. A great sign. The whole tent is filled wall to wall. So there's a lot of release from the plants. Very good. I still need the temp to climb though. Grow System Environment: Temp: 71.4° RH: 57.2% VPD: 1.10 kPa March 26, 2024 Both ladies needed watering today with Banana Purple Punch A bring dried out and B having a bit of water on the bottom. Definitely drinking much slower than her sister plant. Again, I believe it's the phenotype, so I'm not worried. If it continues, then I may have some concerns, but when the roots start popping out in earnest, the plant will take off and need lots of water. I also made a couple minor adjustments to the canopies of both plants. Nothing really Earth shattering, but at least a note of the day. Oh and I attempted to tuck all the lowest leaves under the plant to make more outer rim space. It kinda worked. I might just cut them off. I removed a few more leaves from Banana Purple Punch B. She's getting super bushy and she definitely needed it. I'll be trimming away as she grows. Very little at a time, but more frequently than normal. Like every 2 days instead of every 4 to 5 days. She's definitely robust enough to handle that technique. I haven't ever actually done a full defoliation before, so I don't know what's better. I hear too much controversy over defoliation on autos, and this seems to work wonders. Hell, I'm pretty sure FastBuds says to trim throughout the grow to keep up with the density of the plant. I don't have anything for Banana Purple Punch A. She's fine and growing. Not the tallest plant in the tent, but also at the same height as 2 others, so I only have 1 plant that's a bit taller. Just the couple adjustments to the canopy. However, her buds are already pronounced and fat. I can definitely tell the buds are going to be super dense. Actually, both plants have the same size buds. They are brand new and big already. Granted, the stretch hasn't started yet, so they may be smaller buds loading up the top with multiple nodes. I dunno. They are big for a few days old. The lighting is still the same. I should also add that I did end up moving the light yesterday. Like an inch up to match 24". I may have to drop the light slightly to keep from going to 100% power. But we shall see. As I've said before, I'll go as low as 22", but that sacrifices the footprint a bit. The environment is driving me crazy. It's not cold out anymore, but I cannot for the life of me get the temp on my room over 70°. Looks like I need a new heater. To combat this issue, I finally added my dehumidifier. Hopefully it's strong enough to clear out some of the humidity and help increase the temp. The environment has been stuck at like 72° and 60% humidity and flowering has begun. I really want it down to 55% now. No idea why it's still so high with the humidity in my room is around 23%. It's super dry. I just checked the environment and the dehumidifier is working somewhat. The temp increased to 76°, which is fine. But the humidity is still kinda high at 57%. It's the VPD I'm really focusing on now. Currently it's hovering around 1.2 kPa. It's better, but I'd rather be closer to 1.28 kPa. We'll get there in the end. The dehumidifier just needs to acclimate the environment. I decided to drop the nutrients back down to 8 ml instead of 10 ml. 8 seems to be fine and I really don't want more nitrogen toxicity. Unfortunately, I ran out of Bud Candy and have to order more, so that will be added next watering. I'll be starting Tasty Terpenes next week. And I start Big Bud next watering as well, I think. Grow System Environment: Temp: 71.6° RH: 57.9% VPD: 1.09 kPa March 27, 2024 Today was trimming day. I did a full defoliation on both plants. Banana Purple Punch B especially needed it. They both got about 15% of the leaves off. The massive ones that is. No small ones. So now there is plenty of space for the auxiliary and side branches to grow and spread out unimpeded by excess foliage. I know there is a lot of controversy in this, but they needed it. Banana Purple Punch A had a little less taken off. Mostly the outer leaves that were pressing in on the other plants in the tent. Some of the inside leaves were blocking precious bud sites. So those had to go. Maybe 4 of those. All in all, I'm quite happy with the outcome. I'll check on them in an hour or so to see how much stress they have undergone. I usually wait for the end or middle of the flowering stretch to start pulling leaves, but this time around I think I got the timing right. Banana Purple Punch B might be a bit ahead in flowering. At least, her buds are huge already. Banana Purple Punch A drinking more than the other plants in the tent. Significantly more. While the other plants are about a third of gallon in, this lady has already taking in about 3/4 gallon of the reservoir. I wonder why that is. The plants are all the same height, but by training only though. The shortest and most matched with canopy height is Banana Purple Punch B. I expect her to take off just like the rest of the plants in the tent. However, she is also the least thirsty. Again, it has to be the phenotype. I just hope this isn't a sign that she will end up short. I might submerge the bottom of the container in the reservoir to better activate the wick system. Theoretically, the container should have already been wet at the bottom before activating. That way the plants and wick system can match up and keep up with each other. I know they can cruise through about 3/4 gallons a day when activated properly. The submersion should help with it. I'll see how things go over the next day or 2. If the rest of the ants in the tent need water by then and she's still slow on the uptake, I'll submerge and reactivate. If not, then we are good to go. I didn't mess with the light again. No need yet anyway. Although, I will check the DLI and height when I check on the plants for stress. Let's hope they took the defoliation like champs. The environment is now back to normal. Somehow the main heat in the house was turned way down. I'm guessing a child. Smh. Anyway, now that it's fixed, the temp is around 80° and the humidity is around 54%. A bit warm, but I'll take it over 73°. The humidity is right where it needs to be. I'll take the dehumidifier out today to help drop the temp to a comfortable 77°. The humidity should also increase to around 56%. Exactly where I want to be right now. In a week, I'll try to keep it below 55%. I may try to drop the temp down to 75° in a couple weeks. Update: I messed with the light. Strangely enough, I had to drop the power down to 80% and ended up with the light being around 25". Now the DLI is at 42 mol/m²/d. I'll look at it again starting next week. I may have to bring the power up again, but I don't think I will for another week at least. Right now, the DLI is perfectly fine. It will help with the ants reaching and spreading those nodes out for the flowering stretch. Grow System Environment: Temp: 76.5° RH: 55.3% VPD: 1.36 kPa March 28, 2024 No training today. I was considering pulling a couple branches down a bit, but everything is level and the plants are the same size. There are some major differences between these two, however. And some notable similarities. The main difference is the internodal spacing where Banana Purple Punch A has decently spaced internodes, while Banana Purple Punch B has extremely tight internodes. It's stretching now, so maybe the spacing will catch up. I'd also like to note that these two plants are seriously flowering now. The other major difference I have noticed is water uptake. Banana Purple Punch A is taking double what Banana Purple Punch B drinks. I had to refill the reservoir as it dried out of Banana Purple Punch A. I also cleaned out the reservoir. Tomorrow, I'll do the same thing for Banana Purple Punch B. I was originally going to wait until tomorrow for both, but I can't let the reservoir dry out completely. There should be significantly less water tomorrow. I'll also have B-52 from Advanced Nutrients. I have Sensizym coming as well. I'll be adding a half dose of B-52 starting tomorrow. I'll add it to Banana Purple Punch A next watering. I didn't move the light at all today. Both plants are happily basking in the light with some perfect praying going on. Nothing to move. The environment is finally back to normal. The temp is between 76° and 77° with the humidity at 55% to 57%. The VPD is where it's at though. Around 1.33 mol/m²/d give or take a few. Right where I want to be. So the plants are looking absolutely stunning. Both have the very same massive leaves of a beautiful green. No stress whatsoever from the defoliation and trained to near perfection. I may move a couple branches here and there as they stretch, but I'm happy with what I have right now. Just enough space in each quadrant for each plant to grow without overwhelming any other plants. As things are looking, I may not need the SCroG net for a bit. The branches are all the same height for now. I may be implementing it if I need to keep the canopy level. Other than that, I'll use it to make sure the branches don't tip over from the buds. I plan on buying some cross bars so I can mount the SCroG net to that. Much more useable training space. Anyway, we shall see how it pans out. Grow System Environment: Temp: 73.6° RH: 54.9% VPD: 1.25 kPa
Likes
24
Share
@Daweed83
Follow
Yooo 🖖🏽 Ladies are going well, buds are growing nicely and now that im in the middle of it im expecting them to get even fatter. I dont see any problem but please if you see any let me know :) In my plan they have 4 weeks still with full nutes and a good week of flush. Same open to opinion on that ! Thank you 🖖🏽🖖🏽
Likes
20
Share
Since I am in DWC and the fertilizers are organic, I take care to add them slowly.. Como estoy en DWC y los fertilizantes son orgánicos, me ocupo de añadirlos lentamente... Por el momento no controlo la atmósfera, sólo tengo un extractor ajustado a 400m3/h para los 2 lumatek al 75%. Planeo controlar la atmósfera a partir de la inyección de CO2 en la semana 2 o 3 para ver más. Mientras tanto tengo algunos picos de temperatura por encima de los 28 pero son realmente específicos. Estoy tratando de mantener la humedad lo suficientemente alta para tener un buen VPD. For the moment I don't control the atmosphere, I just have an extractor set at 400m3/h for the 2 lumatek at 75%. I plan to control the atmosphere from the CO2 injection in week 2 or 3 to be seen again. In the meantime I have a few temperature peaks over 28 but they are really specific. I am trying to keep the humidity high enough to have a good VPD. Subí un poco la ec este fin de semana 4 de 0.9 a 1 I turned up the ec a bit this weekend 4 from 0.9 to 1
Likes
31
Share
Hello Growers and Tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 We'll got progress going! Pictures taken on day 42 of flower. The smell is something that i'm loving. Although one smells stonger and sweeter than the other, they both are smelling great. I had my doubts about the nugs not being big or hard but it seems like the green sensation is doing it's job. There's been a good progress since i've started using Green Sensation. Glad to see that. In flower I feed with only water and 2ml/L of enzymes. Once about 10 days. Resin prodcution has gone up, buds are denser and a bit bigger. Which is good given that most of the pistils are still white and they fatten up more when they rippen. As long as things keep a stable progress, i think i'm good.
Likes
28
Share
@J_diaz420
Follow
Muy contento con el resultado de esta hermosa genética llena de resina , un olor muy rico, agradable al fumar y muy potente, cumple con creces mis expectativas 👍👨‍🌾🏻🍀
Likes
24
Share
@Haoss
Follow
Sponsored by Mars hydro, thanks for the great support 🌱
Likes
43
Share
~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/1- Well here we go again fam! This one's going to be super fun with one of my favorite autoflower strains from Seedsman Seeds, growing in a little 2qt. popcorn pot and entered in the 'Best Rarest & Smallest Pot by Seedsman' contest, this one's gonna be a champ! 🤩 Today I went ahead and planted a seed directly into the medium which was pre-moistened with tap water from my well. After I placed the seed about 4-5mm deep, I gently covered it with medium and poured approx. 1oz of water on it. I'll keep the pot in the tent with a Solo cup over it to retain the moisture until it sprouts... Fingers crossed! 🤞🤞 11/3- When I checked on the Zkittlez this evening I was elated to see that it had broken ground sticking up about 4-5mm from the medium! I removed the red Solo cup from her and replaced it with a clear cup that has ventilation holes in it and which I misted the inside of with water to ensure adequate humidity for the seedling. 11/4- This morning I checked on her and she's already up to about 18mm tall but has not shed her shell yet. I'll make sure that the medium stays just moist for now until she's a little older. By late in the evening she had shed her shell and her cotyledon's began opening. I noticed, after taking a close look at her, that her first tiny set of leaves were brownish looking with light colored tips. I immediately thought back to when I was pee-moistening her medium and had a 'high moment' using my other plants nutrient solution which was around 800ppm in her pot instead of the straight well water I usually use. I thought that she was getting nutrient burn causing the funky color of her first leaf set but fortunately by the end of the 20 hour light cycle, she had her first leaf set out and the were a healthy green! 11/7- Well gromies this girl has a week behind her now and I'm elated to say that she's healthy and doing marvelously! Up until now all I've done is make sure that her medium didn't dry out using straight well water ph'd to 6.1 @ 75℉. Today I went ahead and watered/fed her with 0.6L of well water with Dutch Pro Grow 'A' & 'B' added @ 10ml/g, Dutch Pro Multi Total @ 7.6ml/g, Dutch Pro Take Root @ 3.8ml/g, Dutch Pro Silica Von Liebig Special @ 1.2ml/g and Earth Juice Oily Can @ 5ml/g which was then ph'd to 6.0 @ 74℉. The Seedsman Zkittlez Auto is doing great and now is at 2 inches tall with good color. Here we go into her second week since breaking ground and the beginning of a beautiful Seedsman cultivar....follow me! 😎👍❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! May all your days and grows be Blessed! 😎🙏💚
Processing
Likes
4
Share
Sorry for the delay. Were in rocket mode cuz things are blasting off!! Things r filling in nicely and i am happy not much i can complain about. Loving these genetics so far but i am not surprised because everyone I follow that grows SAG autos got the 🔥 with amazing results. Thanks to that follow along i try to not dissapoint. To all the planters of the trees lets keep growing the dank!! Catch ya the next updank Weednerds!! GrowerzLuv✌️
Likes
15
Share
@Saltoa
Follow
Day 57 5 litre water 10 mg sensi bloom ab 5 mg call mag 5 mg nirvana 5 mg owerdrive 5 mg b52 5 mg carboload 5 mg senszym 5 mg revive
Likes
5
Share
Prep- 3/3/2025 Test 1q tap water for ppm and ph 1q tap water treated with 1 drop of Hydrogen Peroxide 3% 3/5/2025 Slurry test, 1q tap water mixed with 1q happy frog soil ph 6.6 ppm 166 3.5 gal tap water treated with Hydrogen Peroxide 3% (10 drops) 3/6/2025 used ph- to bring 3.5 gal treated tap water to 5.7ph 3/7/2025 Day -7 added 1.5" perlite to three 5Gal cloth pots Happy Frog Soil 2 cu mixed with 2Gal treated tap water Mixed by hand until soil was at field capacity divided soil to cloth pots, loosely to ensure soil is not packed Pot weight 18 pounds, each 3/12/2025 Day -3 Soaked rapid rooter and seeds in distilled water. Disinfected tent with alcohol, hydrogen peroxide, and an ozone generator. Wrung extra water from rapid rooters to bring them to field capacity. Added seeds to rapid rooter and added drops of hydrogen peroxide. Distilled water added to tray Graphite heater added under humidity dome VPD in tent set to 0.8 target for humidifier and heater control. Light set to level 1 @ 14 inches Par measurement just over 200 3/13/2025 Prep Checked logs and charts to ensure vpd, temp, and humidity are stable in tent. 3/14/2025 Prep Checked logs for tent environment stability. vpd, temp, and humidity are stable in tent. No sprouts yet 3/17/2025 One seedling has sprouted. Check for others tonight. 3/20/2025 Transplanted Seedling #1 to 5gal fabric pot. Removed 2 other seeds from rapid rooters. One rapid rooter was getting a green discoloration on top. Pulled and sterilized equipment. 2 new seeds on a 24 hour soak in distilled water & h2o2. 2 unviable seeds transferred to new rapid rooters after a treatment of h2o2. Not expecting them to pop but will expand if needed. 3/21/2025 Seeds #2 & #3 both showing taproot Moved both germinated seeds to rapid rooters 3/22/2025 Both seeds sprouting from rapid rooter. 3/23/2025 One seed has bad case of helmet head Other seedling looking great 3/24/25 Helmet head seed pushed itself and root out of rapid rooter. Carefully guided root into rapid rooter. Gently removed outer seed husk. Seed sac still intact and glued to leaf growth. Added drop of water to head to assist with removal Returned in 2 hours and sac leaves had opened, sac fell off when touched. Stalk is correcting itself and leaves look undamaged. 3/25/2025 Transplanted 2 seedlings to fabric pots Additional Notes Light provides 5x4 coverage for veg at 18 inches Light provides 3x4 coverage for canopy at 12 inches Aiming for 3x4 canopy with 3 plants using SCROG & LST Upgraded light to fc-4800 for better coverage, had concerns with par levels for the bt3000