I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Pas sur que le fi ming est marché. A oui ! les 12/12 c'est pour deux photopériodiques en cour . Puis pour voir le résultat. 24/03 Mmmm.. fi ming un peu tôt peut-être.. Jai l'impression...Nuit froide aussi, 16 environ. 26/03 ouaip! fi ming raté. Ratée 😭 le log. de traduction déforme més phrases... réorganisation des filles...

3 ml npk in 2 l water And given half of it! Plant seems to like it And pruning worked wonder! Leaves are healthy and getting much bigger in size! 15 cms+ excited!!

Leider nicht viele Videos und Bilder

2/10: I watered today with about 3/4 gallon each, plus cal-mag, signal, bembe, armor si, a little open sesame, and their final dose of endoboost. The short one never did stop making the hook leaves on all her new growth, but she seems happy..budding faster than anybody else.. 2/11: Wife home sick today....postponing construction project to raise the lights. 2/12: Today, I tackled the project to raise my ceiling another foot. In addition to that project, I installed and hooked up my new AC Infinity 6" intake fan. It's pulling in fresh air from the soffit vent on the eave of the attic, and currently feeding the garden with 46f fresh air. I'm able to easily maintain daytime temps in the lower 70f's now. I am able to drive the nighttime temps as low as I want. The only issue is that the outdoor RH varies quite a bit, so I ordered a 30-pint dehumidifier to put in the top of the closet. I sprayed everybody with boomboom spray to try and mitigate the light burn damage that is likely to ensue. 2/13: The taller one is still stretching a little bit, but the 2-footer is just budding up. 2/14: I fed them today with about 3/4 gallon each including grow big, big bloom, tiger bloom, cal-mag, signal, bembe, humic acid, and I switched over from Open Sesame to Beastie Bloomz. Raised the lights another couple of inches. I did some training on them and defo'd a little bit. 2/15: Installed the new dehumidifier and rigged the continuous drain on it...works great. 2/16: I rotated the edge plants and removed some old leaves. I added another 22w 3000k 4' bar light under the canopy. 2/17: I rearranged the garden and defoliated a little bit. That's it for week 8-

end of week 3. start of week 4 lezgoo.

Watering has jumped up to every 2 days ph 6.3-6.8 with 20% runoff Flower Fuel has been added to AP,GG and ZK watering's. Lights have been lowered to 24-28 inches. White Widow just started flower at end of the week. Still waiting on the Cream Cookie. Doing light Defoliation to expose bud sites to the lights.

Updated the official lab result for this specific plant... thank you spliffseeds, its great to know what youre smoking... Its amazing how a 55 cm plant can yield 120+ grams of dank dry buds, important here was the training and filling the cannopy, scrog net would help me in terms of supporting her coz as you see on pics i harvested her after 3 days of no liquid and she just fell down coz buds were to heavy... and throughout the process i had problems with holding branches in one piece lol so i had to do all the funny bondages with green wire, sadly i dont have pics coz i couldn make a clear photo of how and what did i connect together.

Transferred 2 plants to 7gal on Day 17 and apply lst......on Day 18 nod start aiming for the sky🙂......topped on day 21

So, the fourth week has come to an end. The girls are slowly blossoming. Pineapple had some problems with watering and nitrogen deficiency, if I'm not mistaken. I hope everything will be fine 😋

She sure looks awesome. I’ve started flushing her this week our harvest her sometime next week or so. The blueberry smell is strong. Her trichs are glistening and she’s swelling up. She’s not very big but I’m hoping to get at least 56 grams of smokable buds from her. I finally chopped her at day 69. I’ll give her a good 5-6 day hang and get her into some jars for curing then update with the harvest.

Hello potheads, the reason to do this Journal is to register the grow results using a dirty cheap assembly, with low investment on equipment and hopefully without compromising results (LOL). The main reason to do this is bc I have tested previously the Bulbs when my last COB Panel failed right after two years and became void of guarantee, also, pandemics in my country made every attempts to delivery it to a technician almost impossible, so we had to improvise . Most of the used materials are accesible by home & groceries store (also online), the nutrients and seeds that are legacy from the previous project. The substrate is recycled and applied on 11 & 15lt Textpots. This is the reason also why there is a lite of lice or white fly plague on some plants that im trying to control with Aceite de Springhill by Anasac (locally branded paraffin oil). About nutrients: The reason to add Carbo & Sugar Is to stimulate beneficial bacterial life on the used soil.This also helps photosynthesis and root development in earlier stages. (ref: https://bigbudsmag.com/marijuana-carbohydrates-boost-roots-buds-thc ) Related to the strains: The G13 by GrowBarato Seeds: 2 Month Old AVG but they were germinated on 12/12 photoperiod (while waiting to cut other plants) , so they acted like revegged with the increase of hours. They're being trained with paper clips to become bushy & chonky units. (4/6 survived) Santa Bilbo by Genethik: 1 Month Old AVG , but they were germinated on 12/12 photoperiod, the nutrient deficiencies that show are bc they stayed on a 500cc cup for too much time and required transplant urgently, and now are recovering and generating vegetal mass AGAIN . The Reason that there are 2 plants in one pot its bc one was less vigorous, cursed, and against all odds, are recovering from stress shock & different carencies . ( 4/5 survived) Eleven Roses by Delicious Seeeds: 10 days Old (Germinated on 4/20/21 on 20/4 photoperiod). They r' fine, healthy Babies and growing on a steady rhytm . There are 8 because there are 2 spaces to fill , but also, they were backup in case all Santa Bilbo transplants failed miserably. For the last ones i need to select whose be transplanted to soil but that's a problem for future me, not me rn. I will VEG for the entire month of MAY in order to fill the spaces of the grow tent and try to update this diary at least once a week. Probably weekends. Finally, if there is something that it's hard to understand by choice of words or gramatical error , happy to receive feedback bc English its not my first language. Kind Regards.

Some Sunday plant porn 😍 I'm just going to flush for 2 weeks from tomorrow or Tuesday and hopefully they will be ready 😬 skywalker is looking so good now. If this is only my second ever run imagine the potential in 10 runs time 🤷‍♂️🏼 I've always knew my fingers were good at something 🏴󠁧󠁢󠁥󠁮󠁧󠁿😏🤣💚

Nimmer lang dann sind die Damen reif :)

The week has been better than expected,,in the way of The Pinapple Express Auto bean from 420 Fastbuds popping and dropping her helmet in just 3 days,which was a great way to start,,! At the same time,,I’ve managed to hit the temperature and humidity levels that i like to grow in,,🌱🙏

Hey everyone 😊 This week they were put in the flower chamber :-). I am curious how both phenotypes develop 😊. I will now wait about 7-10 days until the actual flowering begins, then I will add 2 g of GHSC Powder Bio Bloom per liter of substrate. Otherwise everything is going as it should and I'm looking forward to next week new update. Until then, I wish you all the best, stay healthy 🙏🏻 and let ea grow 🍀👋 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Week 1 went off perfectly, purples babies reaching WEEK 2! 😍 PRESENTATION OF THE LADIES 😍 ------------------------------------------ The four plants are the same genetic. But they already have a different look, and I would introduce them to you :) 1) The Ugly - She have terrible first leaves. But she isn't late compared to the other. So I still believe in my Ugly! 2) The fatties - 2 of them grew wide leaves. It's just about leaves shape for now. 3) The solar panel - This one grew less wide but longer leaves. Regarding the Ugly, I must say that for the 4 seeds, I had to manually remove the shell when they sprouted. They all had their shell on after sprouting, and I don't like that. Probably a bit old seeds? For now, they share the same needs, and seems all happy. But this might change. I may even not be abble to recognize them, except if I cheat on them by putting labels on their pots ^^ 💧 WATERING 💧 ------------------ Luckily, the weather is offering some rains, and I been abble to put the ladies out under the rain during day 7 and 8. Not that long, they still got watered on Day 8, some hours after the rain. With feeding for the first time! 🍗 FEEDING 🍗 ------------------ First feeding. Used Fish-mix at 0.8ml/L. I plan to have a second watering in the week, but without nutrients. That's why I written 0.4ml/L in diary settings. If you know me, you also know that I like Fish-mix, but that I'm also effraid of it ^^ As foliar later during veg, it's an awesome products, easy to see that plants love it. But it seems verry powerfull, and need to be used carefully when given to plant. My rule is to limit to 50% of recommended dose. For now. Anyway, Fishmix right after a rain must turn on every form of life in soil I believe 😀 Even life coming from rain. 🏡 GROWING CONDITIONS 🏡 ----------------------------------- Starting an indoor session on the end of summer seems a good choice for me: - Some rains that provide me better water - I can put the ladies out if verry sunny, to save electricity/money - Perfect temps in the grow room. My house is always windows open. ​The growroom lightup in the end of the afternoon, when the day get cooler - Plants will flowering indoor during winter. I need heat during winter, so thanks grow room :D And cold air mean verry dry air! So reaching low humidity on the end of flowering will be verry easy! Pests : Nothing to report for now. I'm expecting a visit of my good old friends the thrips in 2-3 weeks 😎 Grow tent & Light (XS2000 ViparSpectra) : Something I notice just now: I'm abble to close the grow tent without air-extraction. I never been abble to do that in the past. This light is waaaay more efficient, and produce way less heat, because I couldn't keep tent close with my previous Mars Hydro TSW2000. Don't be effraid, I still renew the air in tent multiple times a day ;) 💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜 Thanks for reading guys :) Thanks for crossing your fingers last week, as you can see.... it worked! PS : Improved my skill with my new camera. But except more and more better ones as I practice ^^ 💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜💜 Update Day 13: Plants watered with PH 6.2 water. Look at that Hugly... She really have a problem 😅 I'll try my best with her 🙌