Merlin Mintz Autoflower is growing great. She is starting to bulk. Starting to aquire a nice smell. Very frosty and looking good. Thank you Aeque Genetics, Spider Farmer, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Time is not on my side as my wedding cake in the other tent is becoming a beast and I want the small tent for the rest of the flowering stage of the wedding cake . So being as its week 11 she will be getting chopped at the weekend which will be around day 77. I think its taken such a long time due to her being more sativa inclined. The grow has gone quite well with no deficiencies that i've noticed. The Humidity is also on the high side so thats another reason to get her chopped soon. I have reduced the nutrients down now for this final week and also reduced the light hours to give her the sign to hurry up lol though she finishing i think at her own pace

It’s the first day of week 7. The nugs are swelling up nice considering what they have been through. They are starting to smell strong. Both plants smell completely different. Even tho they are the same strain and from the same pack of seeds. If you have an idea of what’s going on with my fan leaves let me know.

Flowering day 3 since time change to 12 / 12 h Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I've started flowering even if some are still a bit small, but otherwise they'll get too wide from training and end up taking up space :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://gardenofgreenseedbank.com/candyland/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

20/06/25: The plants seem to have taken the repotting and strong sunlight really good and are growing nicely ☀️ From now it's all outdoor so let's hope the weather gods are more generous than last year! Also I couldn't stop myself from applying some mild LST to get a bigger canopy! Plants are still pretty bushy and I am super excited to see how the stretch unfolds from now on! 😍 25/06/25: First week of flower is almost over and the vertical growth was unbelievable! It seems like Gorilla Z Auto #2 leans more to the sativa side and developes really large internodial spacing, while the other plant remains a bit more bushy! 🌿

Last week flush for second week and than 2-3days of dark cut, hang up,and rest for week

Non pensavo che queste Fast Flowering potessero crescere così velocemente! E sono curioso di vedere come prenderanno spazio le radici ora che le ho travasate nei loro vasi finali! Anche qui le piccole macchie sulle foglie sono di zeolite pure 10 micrometri di Dogma Organics e il terriccio è stato preparato con il loro 4 componenti Super Soil che è una vera bomba…diversi guani, letame bovino, micorrize, vermi compost arricchito con acidi umici e fulvici, Cal Mag fatto di rocce triturate meccanicamente, ceneri arboree e febacee tritate ecc…ditemi voi se non è un Super Terriccio questo!? In attesa delle prossime settimane 👀

She's growing a little funky but hopefully she'll come around. Probably because the pot is so small my other, bigger pots are stealing it's light

Das Zelt ist voll 😊 Gertrud hat sich sehr gut gemacht und mit Biotabs bin ich mehr als zufrieden, war mal echt einfach 👌👍 Denke mal so 2 Wochen noch?. So fette buds hatte ich auch noch nicht, vielen Dank an Fast Buds 😘

Regular feeds twice a day the most consistent enviroment ive ever run, and the rewards are there to see. She is stacking great loads of space for her colas and the nicest stawberry smell.. I have a bed of stawberries in the garden and its amazing just how fruity these flowers are.. No drama and nothing to report so a little boring. Maybe the pics will be eye candy for you as much as they are for me.. Stay safe Grow well..

Days 49–55 | June 23–29 The tent’s getting noticeably more fragrant - those complex notes of citrus, pine, and cardamom are now joined by a sharper diesel layer when the buds are disturbed. Buds are visibly denser this week, especially on the main colas. Stacking is steady, and trichomes are beginning to cloud ever so slightly, though most remain clear. No amber yet. Lower leaf yellowing has continued - older fans fading out slowly - but now I’m starting to see yellowing creep up into the mid and upper canopy. Nothing aggressive, but it’s definitely progressed since last week. Fan leaves are still perky, and sugar leaves remain healthy, so I don’t suspect toxicity or major imbalance - just a steady drain of mobile nutrients as the plant puts all energy into flowers. Fed with full nutrients mid-week (2L: 3 mL Micro / 1.5 mL Grow / 3.75 mL Bloom, pH 6.4), and removed a couple of fully yellowed fans from underneath. Soil has stayed evenly moist with good bag weight - I've been careful not to overdo watering volume to avoid damp pockets. RH is steady around 50–55%, with temps hovering ~25°C. VPD is within range. No signs of foxtailing, stress, or pest pressure. Canopy is even under the trellis, light at ~36 cm above tops. Still tracking macros regularly - trichomes developing well. Flush date is locked in for Week 11, based on travel plans - not trichome maturity. For now, the feed rhythm continues, and I’ll ride the line as long as I can to bulk up the flowers before transition. Final swell ahead. Holding the line.

✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.

Dear Friends ❤️ in this week we topped again and bended this great Headshot by Seeds Mafia I topped the plant and remove big fan leaves that covered bud sites I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 ABOUT HEADSHOT BY SEEDS MAFIA Headshot is a feminized cannabis strain that may grow in any environment, whether it is indoors or outdoors, and is therefore recommended to both experienced and inexperienced growers. The plants grown from the Headshot Feminized seeds are tall, compact and robust, and reach a medium height of 100-150 centimeters. Their flowering period is short, about 50-55 days. They give dense buds fully covered with a thick layer of resin. Also, this variety has quite a popular feature, it has a high productivity. It may be harvested in October and yields about 550 grams per m2. The plants reach a high THC content of 19%. Obtained by crossing AK47 and White Widow, Headshot Feminized is 30% sativa and 70% indica. Its flavor is sweet and reminds of sandalwood and oriental incense. Its name comes from its effect, which is rather cerebral and uplifting, perfect for relaxing and calming down. Data Sheet: Sex: Feminized Grows: Indoor, Outdoor, Greenhouse Height: ≈ 100 - 150 cm Yield: ≈ 800 - 1000 gr m2 Flowering time: 8 - 9 weeks Complete life cycle: October Cannabis Genetics: White Widow х AK-47 THC: 19% Type: Sativa 30%, Indica 70% 💸💸💸💸💸Buy Headshot: https://seedsmafia.com/en/feminized-cannabis-seeds/headshot-feminized.html OUR GERMINATION METHOD STEP BY STEP I Germinated all seeds in cotton pads because in my opinion is the best way, I'll tell you why. Why use cotton pads? You should use cotton pads because it is one of the fastest way to germinate seeds, it is also one of the more reliable way. This is a NOOB-FRIENDLY tenchnique, you have to respect some little and easy steps: -take one cotton pad, spray it 5 times with water; -dispose seeds in the sprayed cotton pad, remember to leave minimum 1cm of space between seeds, -take a new cotton pad, spray it 3 times with water, face it down and put it on the seeds of the first cotton pad; -now, spray the dry side 3 times. -put this/these "sandwich/es" in a sealed container of a sufficient size to store them, I use like a plastic tupperware (glass or plastic are equal) with about this size: 15x30.It contains about 8 "sandwitches". -store the container in a dark place with a temperature from 17°C and more. More light they see and colder is the place,slower will be the germination and lower will be the germination ratio. *(-If your seeds are old, not good stored and with a low germination ratio, I suggest you to use Seed Booster by Plagron. Old seeds and maybe stored in a very hot place for a long time may will be death may will not never germinate). Generally a normal cotton pad is good for 3 seeds. If you follow these steps, you will hardly have problem of non-germinating seeds. I tried all methods (except rockwool cube) and in the last two years (and I germinated a lot of seeds) I can tell that this is the faster and reliable way. I loved to use paper towel but with this metod is very easy to put too much water and it will be slow down the germination step. I really hope that this "rule" will help noob growers and maybe will help other growers to improve their skills. I personally do the step by step draw guide. ENJOY. 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾

Hi everyone 😁 I would like to thank you all fellow growers and breeders for such a great support on this journey. Thank you Grow Diaries and Green House Seeds. Without you all this wouldn't be possible. Love you all First ever recorded diary so don't know where to even start 😅 I am returning to growing after many many years of break. This is my first ever experience with autoflowers, scrog, lst, led and such tiny grow space. Choice of strain - Big Bang Auto from Green House Seeds. I have run so many strains from this seed bank in the past and I was always happy with the final outcome. Was looking for indica dominant strain, fast flowering cycle and very important heavy yields on small spaces. Again thank you GHSC in very happy of choosing this strain. Little bit about my cabinet. External dimensions: 64 x 50 x 114 cm (W x D x H) Growing area: 55 x 47 cm cm (0.26 m2) Panel based on SAMSUNG LM301B diodes Spectrum: Samsung LM301B – 5000 x72 Samsung LM301B – 3000k x136 Samsung LM301B – 660nm x9 Samsung LM301B – IR 760nm x1 Regulation in the range of 20W - 110W - Meanwell XLG 100-H-AB PPF 300 umol/s PPFD 890 mol/m2/s @30c Total of 6 adjustable fans, 4 exhaust fans 4 modes - silent/drying, vegetation, flowering, full power Active carbon mass in the filter 2kg Absolutely love my grow cabinet. Thinking of next build already. My grow 3 beautiful ladies - Nuna, Luna and Sweet Mary Jane. This was a pleasure experience growing autos for the first time. All 3 ladies on the end developed perfectly. Nuna, left corner lady- tall and beautiful. She had some problems to switch to flowering and was even considering removing her but very happy that I was patient enough and turned great. Luna, right corner lady - have to say she is the queen. She has the most heavy buds from all, the most. colorful. Her wet weight was 420g, can't say how much of dry but guessing approx. 100g Sweet Mary Jane, front seat lady. I think she was the most pleasant to grow of her location but due to no other spare space for drying I belive that I have harvested her at least a week to early. If keep longer I belive she could be the most yielder from all 3. Thank you all for all the support, help, comments, likes, messeges. Love you all 💚💚💚 Will update this diary in some time and when puff perfectly cured 😎 Peace and love ✌️💚

Wow she's frosty!!!??!?!! Did I mention that before? 😁 😂 Trichomes going cloudy now.

Almost done and ready for harvest

This strain loves the nutes that's for sure.The way the main cola is forming ...gna be huge.Sweet asf smelling,gna feed her tmw again, every 2/3 days she needs to eat atm.Cant complain