Day 5 - MC1 need large amount not defoliation and LST MC2 light defoliation and leave LST tilnext week

Ladies doing fine. Worm castings are magic. SD2 is getting greener. I topdressed all the plants with worm castings

Germ Week1 (Day 1 Feb24) Stilton and Tropical Berry done directly into a riot cube sat in a bed of biobizz light mix in a solo cup 2 fruity widow seeds sat into a wet paper towel in a ziploc bag Feb 27 - no real move from the widow's in the bag, so i moved one of them into a riot cube Mar 1 - action from stilton, but the others not really doing much. Mar 2 -widow 2 is dead. went to the shop and got myself a barney's farm critical kush, into a paper towel What's the plan here? Hoping for 4 different strains to give me 4 different reactions to the same conditions and maybe I'll find something that likes the space i've set up I've never done direct to substrate before, but seems to work fine. Doing the kush in a bowl just because it feels more comfortable to me, but likely not a big deal What are we doing different this time? Try to watch and maintain temp and humidity as well as possible. In seedling I'll look to mist the riot cube once per day, in the morning, with a tiny bit of water As soon as the first set of leaves touches the edge of the cup i'll transfer to final pot and hopefully have some micro-r to help the transition Looking to maintain as little LED headroom as possible, to try and get the nodes really close Aiming to top at node 3 once I see node 6 just start to pop out Feed once per week and water once per week.

1st of November, HARVEST, D91 So, after the 24 hours of darkness, she is now beautiful and ready. After chopping her, I hung her for some hours – I had some stuff to do – and after that I did wet trimming since I find it more convenient and I don´t like to trim dry buds. I guess the best way for me would be to leave it drying for some days, do the trimming, then leave it drying some more, but, I sincerely don´t have patience lol. When I was in the last stock to trim (which was the main btw) the top bud looked strange to me so I opened it and it was starting to rot.. I got really sad but what can I do except for trying to save it, right? So I took all the rotten parts out of the top bud and tore it to pieces to watch it closely and keep it from getting any more mold. D94 Today I weighed the half part of the top bud that was already dry and it remained without any mold: 3.6 grams. D97 Everything is dry and now curing, the total weight is 68.6, 65 of the whole plant and 3.6 of what I saved from the rotten bud. I´m really happy with the results, the buds aren´t much dense but they look beautiful. D111 Today is the 14th day of curing. D120 Today I´ll be doing the smoke report, it´s been curing for 3 weeks and the smells is quite good already, I know it can be better but the taste is good already so I´ll be doing it today. More info on growing in the previous weeks and a summary of growing and also the smoke report are on the top at the strain review. Thank you very much for reading my diary!

Gracias al equipo de Kannabia Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Amnesi K - Lemon: La Amnesi-K Lemon es una semilla formada a partir de un trío de reyes, la Amnesia, la Lemon Skunk y la Jack Herer. Este matrimonio de tres dio lugar a una gran sativa que, con tonos dulces, terrosos y muy cítricos 🌻🚀 Consigue aqui tus semillas: https://www.kannabia.com/es/semillas-marihuana-feminizadas/amnesi-k-lemon 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/productos/ 📆 Semana 5: Comienzan a formarse los cogollos, las hojas se llenan de resina cada dia y el olor es bastante fuerte. Parece que ha terminado de estirar. Practico una defoliación intensa para airear los futuros cogollos y dejar mas espacio en el cuarto de cultivo. Agrupo de nuevo las macetas en su lugar optimo para asi rellenar por completo la carpa @marshydro. Me quedé algo corto de nutrientes pero estoy muy contento con los resultados, cada vez le voy encontrando mas su punto optimo. Siempre es mejor quedarse corto que pasarse.

Day 36: Week 6 off to a start. Everything is looking good. Watered with nutrients(1ml SR, 4ml B). Only had 2ltrs ready and got no run off with this amount. Clipped off 5 or 6 of the lowest leaves that weren’t getting light. Day 37: Watered again tonight as the soil felt dry. Same dose of nutrients as last night. Took 3ltrs before I had sufficient run off, she’s a thirsty one. Removed all ties for the moment bar the tie holding the main stem down but I did loosen this a bit. The plant is very wide so I want the branches to move in a bit as the grow up. Day 38: I had to clip off a good few leaves. I know defoliation is a bad idea at this stage but the plant is very bushy and I’m finding damp patches on leaves. Day 39: I put my hand on the pot tonight and I couldn’t believe how light it was. After taking 3ltrs only two nights ago, it took 4ltrs tonight. Watered with nutrients (1ml SR, 4ml B). Day 41: Watered with nutrients (1ml SR, 4ml B). Still clipping one or two leaves each night because it’s so crowded in there. Plant looks very healthy. Day 42: Six weeks old, where has the time gone. I remember it when it was just a seed. 😀. Plant grew 16cm this week.

Flowering day 49 since time change to 12 / 12 h Hey guys :-) All ladies look very healthy and delicious :-) We're slowly getting closer to the end. Watering was done twice this week, each time with 1.2 l (sewing materials see table above) At the next watering there is a very light rinse with Clean Fruits so that the last nutrients can be slowly used up. The trichomes are now checked every day. I'm looking for my microscope with an app so I can take pictures of it 👍. I wish you a lot of fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Still going. Put up a second light to try to get some additional bud growth and avoid larf as much as possible.

Day 8- not much action, rather just preparation. One of which is the transplant into net pots and relocation into the grow room. Also misted roots again in AM as well as propped seedlings that weren't upright and steadfast yet. Day11 - new seedling popped up yesterday, nice surprise. GZ s looking super healthy. The Raspberry Diesel has some long looking first true leaves. Well.see what they look like soon when they hit a nice growth spurt. Can hardly wait!

Primera semana en un sustrato malo del cual fue trasplantada la siguiente semana

Overall, the Bling strain grew very weird initially, however, it did suffer some trauma and grew 3-point leaves for awhile. Resistance to PM was not good, but was able to keep it at bay until harvest time by daily spraying of Athena Mildew Control. I prefer to use this as I was using H2O2 and it burned leaves because of the pH change. My other harvested plant, Mimosa did not do as good from that spraying, but more on her in my other post. Getting back to Bling - I felt the buds thickened up nicely in the end, with hues of purple calyxes coming out as well as with some leaves. Smells wonderful and looking forward to smoking some after the cure. More to follow...

😍👌

COMING SOON!!! Ran into some problems with the basement. Winter snow melt and flooding 😩. Everything is cleaned up and the tents are sanitized 👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.woodroom.tel/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

15th day into flowering- Trim some Fan leaves /anything cover canopy. 18TH DAY FLOWER- LOLI POPPING. JUST WATER EVERY 3 DAYS PH 6.5

Week 9 flowering

7.2.25 9th week of flower started on 6.30. Buds smelling nice and pungent! Almost done another week and it’s harvest! Trichomes are almost all milky with some still clear! Can’t wait to finish this one up! Thanks for looking at my mini plants have a great week! 🏼

Incredibly, they both gave almost the same, 70 grams each. good quality but it was below expectations I felt a difference compared to the cars in the first round maybe my fault or genetics 🤔😅🤪

Flip the script to 12/12 waiting on a small tent via amazon to put my MILF in so I do not contaminate the other ladies, clones are hanging in there hope they will be ready to go into flower at 21 days. I just potted up to a 5 gallon fabric pot. They were drinking so much they were dry in 1 1/2 days. gave them a mild feeding and a good watering did not want to give to much trans nuites this week as I just lolly popped and potted up on the same day they look healthy enough to take it but I did not want to over whelm them with the food. so the plan moving forward it to start spraying MILF A in her own tent while the others flower in the big tent then the clones will move in to the tent and flower for 3 weeks all the while spraying MILF A 2 times a day with the CS the hope is by off setting the clones and the mothers by a week the MILF at 4 weeks while have Feminized Polled sacs that will be ready to sprinkle on the clones the other to mothers will flower to completion be chopped and dried and the clones will go until the seeds are mature with in an extra week or two. Stay Safe🙏 I will post more pics this week end.

7/7: Transplanted plant to final pot! Roots showed out of tray. Accidentally pulled a root off during transplant 😢. After transplant I top feed/watered medium with a half gallon of treated water. I mixed 2ml of Rapid Start in 1 gallon water hub. Poured half in half gallon jug then poured half gallon over medium. Added 2 gallons of water into reservoir (1st white line) to promote root growth to bottom and to begin capillary reaction. 7/8: Bumped light intensity dimmer to 30%. 7/9: Left for Vacation.... Praying for my baby!🙏🏿 Going to be gone for 4 days. 😅 ***** For this Grow****** “Day Air Temperature” will be the max temp of tent for the week. “Substrate Temperature” will be the average temp of tent for the week. “Night Air Temperature” will be the lowest temp of the tent for the week.

What's up guys Well, another week has passed and the heat here in my city has increased a lot and as I don't have air conditioning the grow room has been very hot, the humidifier has helped but not enough and we'll see what happens from now on. =D