Recommended
Likes
101
Share
@TOTEM
Follow
A honest opinion? I’m sorry that she could’t grow with all the space and light she needed. She’s good, I removed all the lower branches that light could’t reach, but she has not much space. Well, I removed 3 plants from the grow room and now she’s feeling better, but I hope lower branches will stretch up and fatten up a lot more. Peace ✌️
Processing
Likes
6
Share
Likes
36
Share
This was a smooth run as most are in the Dutch buckets. I flowered her on a 5 gallon reservoir which was a challenge to keep topped off towards the end when she was drinking over a gallon a day. Definitely my best autoflower yet.
Likes
8
Share
@pzwags420
Follow
The Blumats are pretty much dialed in after a few days. I used 5ml of flying skull Z7 enzyme in my 5 gal reservoir to keep the reservoir clean. I also have been ph correcting the reservoir every morning to 5.8-6.0. The first day of week 4 I hand watered in Nutrients mix until runoff(about half gal). I removed the large fan leaves on all three plants, then I tied Down all my Mains to keep them horizontal. I applied another half gal of Nutrients mix on the 4th day of week 4. On the 6th day of week 4 I experienced a runaway with my Blumats because I changed the settings too much at once and flooded my grow box. I used a shop vac to suck up all the runoff. I refilled my reservoir, added enzymes and lowered the ph to 6.0. I then dialed in the blumats based on Blumats instructions and will only adjust in micro adjustments this time to avoid another runaway 😬 Luckily running in Coco Coir having the girls over saturated wasn't the worst thing and the roots are sucking up a lot of the extra moisture in the medium happily 😀
Likes
12
Share
@Xabii
Follow
Short week due to harvest. Plant started to smell a little less, hope I did not loose that taste because the harvest ain't gonna be much. Values are average of the day. DATE - EC(us/cm) 20250607 1630 20250608 1654 20250609 1668 20250610 1722 20250611 1628 DATE - PH 20250607 5.85 20250608 5.85 20250609 5.85 20250610 5.86 20250611 6.13 DATE - ORP (mV) 20250607 248 20250608 237 20250609 235 20250610 224 20250611 188 DATE - °C - RH% (Tent Temp/RH) 20250607 24.7 55 20250608 24.5 54 20250609 24.2 48 20250610 24.8 52 20250611 24.2 52 DATE - °C (Reservoir) 20250607 21.0 20250608 20.8 20250609 20.2 20250610 20.8 20250611 21.1 DATE - CF 20250607 16.30 20250608 16.54 20250609 16.68 20250610 17.21 20250611 16.28
Likes
22
Share
Another week for the persian pie 😁 so far so good, only 2 and half weeks left, we gave some candy and for the rest only water! Hopefully things continue to go good! She showed a lot of thc so I'm sure it's going to be a strong smoke
Likes
10
Share
We are almost at the moment of working our magic, we are about to go into flowering and the vegetative phase is coming to an end, our Zamensia Slurricane is a very beautiful plant with low internodal distance that looks like a small Japanese tree. We are about to do the last topping that will bring it to 16 tops, 16 small clones of the main cola that will come up I hope at the same time and all together and above all I hope that the cold will give us a great resin and a beautiful coloration. During the topping the use of nitrogen is a very delicate subject. The topping cuts slow down the plant and the leaves tend to grow bigger going a bit into over, it happened to her then you detach and it tends to discharge now we are at the moment that we are starting to give nitrogen again to then go into flowering. It is a process that must be nuanced very delicately. Ideally it is to start by preparing the soil with fertilizer and add if necessary. I over-fertilized the plants a bit but it's something I've always managed very well once I got to flowering. Next time we'll add something to the soil with fertilizers with this technique it's very suitable. Wait for the uncle BreadandBuds.... We are always using soil, feeding and all the recommended additives from Plagron 100% organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy...It's a super News! ---- https://www.zamnesia.io/it/11177-zamnesia-seeds-slurricane.html Zamnesia Description // Do you want to add a prestigious genetics to your grow room? Slurricane is a premium US strain created by In House Genetics and now available to growers thanks to the breeding processes implemented by Zamnesia. Born from the fusion of Purple Punch and Do-Si-Dos, Slurricane is 60% indica and incredibly vigorous. Whether grown indoors, outdoors or in a greenhouse, this strain can produce large quantities of dense and aromatic buds. Add Slurricane to your assortment and enjoy growing one of the most beloved hybrids in the United States. All the best that mother nature can offer is on ---- www.zamnesia.com
Likes
11
Share
@GrowSmith
Follow
Pretty little hairs After adding first dose of PK Warrior all both sides have doubled in size and plant has stretched a little bit more We have to manually adjust the light so that I don’t get any burn Adjusted light from 10 cm to 25 cm
Likes
20
Share
@ukterpdoc
Follow
Everything going well c02 bags shoud activate soon so with fans being able to run so low because of the led's I expect bags to be a winner got co2 kit ram controller was going to wait till next run which will be sealed but might give it a try as fans running so low (Any comments friends?)
Likes
6
Share
@Groweedo
Follow
Hello, J’ai commencé le rinçage des plantes mercredi, il reste une bonne semaine pour la Runtz (odeur bonbon, trychomes opaque, bien collante) et à voir si je laisse un 1 semaine de plus la Frozen ou pas (car pistil encore trop de pistils blancs à mon goût )
Processing
Likes
22
Share
1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 Both "A" and "B" put on an inch overnight. Now that the soooperstunted mutant runt is acting like a normal plant, so henceforth I'll refer to her as "C." 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 I moved #3 into the tent with my DWC rig to veg a little longer. 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. #3 is still vegging in my SCROG tent with the #8 FFT DWC plant. She's coming along, but still not ready for prime time.. That's it for week 4-
Likes
5
Share
brothers sisters. this journey was wonderful. From the first month I knew this was going to be a wonderful experience and I was right. with the flower was not lead time no problem. I would recommend this model to anyone who likes fragrant flowers. and especially giant flowers. thank you for watching. and many thanks belong mainly to the @originalsensibleseeds . 💚💚💚
Likes
3
Share
Fruit King (Clone) In greenhouse Veg : 18/1/24 Veg : 7-8 Week To be continue ... thank
Likes
41
Share
Plantas con flores realmente muy llamativas, una de ella con ese color purpura oscuro y otra con tonos purpuras que la hacen resaltar por su brillante capa de tricomas. la planta es bastante vigorosa, hay que tener muy en cuenta la altura siempre, es una planta que echa unos estirones espectaculares, se debe turorar por completo para lograr un buen rendimiento .
Likes
17
Share
planted 10 gorgeous autoflowers, everything went up on the third day
Likes
11
Share
@Roberts
Follow
Fast version B is doing good. I will have her in the flowering room next update. Everything is doing good. Thank you SSSC, Dutch Passion, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
14
Share
@Kirsten
Follow
12.5.25: I watered with some more Trace again. She's feeding well and needs watering more often again. I upped the dose of Trace as I've noticed that there are some purple hues coming back on the stems. 13.5.25: I have removed all fabric ties on the plant. I think we have stopped stretching, so the sooner, the better. I keep getting my watering can caught in them all, and it was only a matter of time before I ended up snapping more branches off 😅 The fewer things in my way, the better 🤫 15.5.25: I watered today as the pot had dried out almost. The plant was watered with dechlorinated water PH'd to 6.5 with the following nutrients per 6.5 litres; ♡ 7ml Trace by Ecothrive ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients The plants received the amounts below. HULKBERRY: 1l FASTBUDS: 2l NORTHERN LIGHTS: 3.5l I am not giving any further nitrogen at this stage. They had a couple of doses in the past week or so. I'm sure they don't need any more. So, I'm just using the kelp as it's packed full of goodness and high in potassium. I also suspect an excess of phosphorus. So I'm also leaving that out for the time being. There are still some red stems on the plants. added the Ecothrive trace for the last few waterings. I'm hoping it will resolve without any further intervention. 16.5.25: I watered Hulkberry with 1.5ltrs of dechlorinated water PH'd to 6.4 with: ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 7ml Trace by Ecothrive Measurements per 6.5ltrs. PPM: 670 PH: 6.4 17.5.25: I watered again today with 2ltrs of the above PH'D to 6.2. Parameters remaining the same. The plant is increasingly thirsty, so the waterings have again needed to be increased. As we're reaching deep into flowering, this is par for the course. I'm mostly using coco, perlite worm castings. Etc. So it's very easy for my pots to dry out. I need to keep on top of it. As the pots dry out, the microbes are lost, and so keeping everything moist and healthy is imperative. That's why I add Ecothrive Biosys regularly to ensure I keep up with the microbial life in the soil biology. To avoid PH lockout. 18.5.25: I watered again, with the same parameters as yesterday. Instead of Sea K, I used Ecothrive Biosys: 1/2 Tsp/6.5l PPM: 550 PH: 6.4 Thanks for checking out my diary and hanging out 💚✌️ 🍃 😊 🌱
Likes
23
Share
@Chi_K24
Follow
Hey guys, late into week 6. We had a wind storm roll through and thrashed the crap out of the ladies, luckily nothing broken or bent thankfully. I was quite worried because they where droopy gor a few days after but I notice they started to recover on thier own. They are still not 100% yet. Other than that last time I watered was Sunday. It's has been 5 days and the pots dried out nicely. Watered them with 50mL of molassas in 5gal of water pH to 6.1. Topped the tallest branches to help the lower canopy to catch up. It's been 2 weeks and each branch I topped already have 4-5 nodes. Perfect timing. Thanks for reading.