I basically skipped week 17 as there was nothing new except I added some compost tea that I made with come compost, vegetable scraps, a few cedar clippings and neam oil (oh and some fertilizer ... I forget what) Sprayed with neam oil/soap mix

🌱 Day 43 - Beginning of the Third Flowering Week 🌱 Hello grow friends! 🌿 Today marks the start of the third week of the flowering phase. This week, I’m trying to adjust my nutrients a bit. I plan to slightly increase BioBizz Grow, as well as BioBizz Bloom, according to the feeding schedule. 🌱💧 I’m continuing to prune and thin out the plants a little each day, aiming to keep them stress-free. ✂️😊 The terpenes and buds are developing wonderfully so far, but I’m still struggling with very high humidity levels. 🌡️💦 Since my grow setup is on the second floor and we’re currently experiencing humid temperatures here in Germany, it’s been a challenge. I’m trying to reduce the humidity from 62% down to 50% during the day, but it’s proving difficult. 🌬️📉 I’ll keep you updated on how things progress! 🌿✨ 🌱 Day 47 - Everything is Going Well 🌱 Watering and Nutrients Today, I watered and fed the plant again. 🌿💧 Each plant received 1 liter, which is about 10% of the pot's volume. The plant is responding well to the nutrients, and growth is steady. Defoliation and Light Exposure I’ve done some light defoliation to ensure that every part of the plant gets proper light exposure. ✂️💡 My goal is to avoid any shadowed areas, allowing the buds to develop fully. Temperature Management The temperature is still quite high, reaching 27-28°C during the day. 🌡️🔥 I’m finding it difficult to bring it down, but the plant seems to be handling it well. To maintain a healthy environment, I keep both the fan and the exhaust system running on the highest setting, ensuring good air circulation. 🌬️🔄 Humidity Control Currently, the humidity is sitting at around 45-50%. 💧 It’s not perfect, but I’m monitoring the plant closely and making adjustments as needed. Careful Defoliation I continue to remove one or two leaves each day to minimize stress on the plant. 🍃🌿 This slow, careful defoliation ensures that the plant stays healthy while making sure all buds have access to light. Guard Dogs on Duty My dogs took a peek into the grow tent today and are now keeping a watchful eye over the plant. 🐕🌱 They’re doing a great job of “guarding” it! 🐾 I hope you enjoyed this update! I’ll continue to keep you all informed, and don’t forget—I post daily update pictures of the plant! 📸🌿 Stay tuned for more!

3rd week now about to setup filter and extractor fan also will be starting LST in a day or 2. Everything is going well so far for a first grow hope it stays that way. Also added the humidifier at the weekend which has upped the humidity 15-20%

Day 3 of flower things seem to be going great, have already had to cut 1 down cause it was a male hoping I don’t have many more🤞

Had alot going on and didn’t upload. Last week of veg

Fifth week of flower and it was time to defoliate the indoor units as they were starting to get bushy and block exposure to the lower bud sites. Quick work with the bonsai shears and they were ready to soak in the sun. I left the rooftop plants alone as I believe having additional leaf mass enables them to withstand temp and environmental fluctuations better. Whether or not this is the case, it was an experiment.

24.5 grams wet harvest it smells like earty,musky,nuts

Dried at 26°C and 65% rh

Day 40 from seed ( 3 in flower). To sat they had a slow start these BlackBerry are surging ahead now. Only # 2 seems to be smaller now. The pale # 3 is still gaining size with no signs of stopping at all, she has a lot of sites around her that need a pin down now they are long enough to reach pot edge.

I ran into a few problems with this grow as it was my first indoor organics grow but I know where I messed up so I shouldn’t repeat those mistakes. With that being said the quality of the cannabis is still there and I am excited about starting again using DWC next time. I love Humboldt genetics and I will be growing more of their lineup in the future for sure.

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

In the drying room update to fol

All 3 plants are looking healthy and occasionally even look happy when I'm not stretching their limbs out all over the place 😒 Not alot of progress on their height but they look like they're doing alright so I'm not gonna worry too much yet, I could really do with these being nice and short so I don't have to mess about raising the shelf up 🙄 That's all for the moment, just watering and moving the branches out, it's nearly flowering time 🎄 Happy growing everyone, take it easy 😎🌿 30th October All 3 plants are doing well and responding nicely to the lst, every day I move a bud site away more and new ones just keep popping up all over the place 🌿 not alot of vertical growth which is fine by me just don't know if that'll negatively impact my yield 😕 but they're more than likely getting ready to shoot up 🌱

Started the final week of nutrients. Then ill be switching to flawless finish and pure water the last week. Gorrila Zkittles just keeps on stacking. The one pheno is going to be a keeper for sure. Very fruity smells.

***May 2 The plant looks like it's either a little deficient or it's starting to go through some senescence. I added 1 tsp. extra of both calnesium and the Bloom, to give it one last push for the last going off. The nugs are all solid as rocks, and the smell is still just as strong. When touching the plant, my hands are left with a very sticky feeling. It responded very well to the supercropping last week, and hasn't shown any issues. Still a few fresh pistils coming in, so I think it's finishing off stacking and then next week I can cut the nutes back down and let it finish itself off.