Recommended
Likes
Comments
Share
The whole grow was full of ups and downs I neglected her basic needs from the get go but she did recover and push along with me.. the growing conditions were not prime and fir that she did me proud .. The buds are tight and have a very nice smell to them .. If I had grown this lady in a bigger pit with warmer temps she would have been amazing ... I'm excited to try her again sometime in the spring hopefully .. the buds I tried a little but of were not bad tasted smooth and cash was white when burned ..
Likes
21
Share
Day 35 is here. We are a week into flower and most the plants are just starting to hit that flowering stretch. I have been bending them down a little every couple days, but I need to focus on cleaning up some of the bottom branches so we can keep good air flow through the plants. Will work on that through this next week. I haven't done a water change, just been topping off the reservoir with fresh nutrients as they drink it up. Feeding half and half maxigro and maxibloom. Will cut out the maxigro in a couple weeks when I notice their stretch slowing down. I had a plant overflow this week because the drain line is getting full of roots. I noticed a couple roots have made their way into the reservoir already. I set a pump timer to 1 minute on and 20 minutes off so they can drain properly. I would like to make it through the grow without having to mess with the drains, but we will see what happens. I will make some modifications if needed. Other than that everything is running smooth and I hope we have some little pistils to show by next week. Thanks for stopping by ✌️
Processing
Likes
19
Share
This 1 is the closest to being ready smells unbelievably good and looks amazing
Likes
31
Share
@Lukush
Follow
Hey growmies all is good and mi baby girls are loving life!! Gonna start giving them some nuts in a couple days 👍 Thanks for passing along have a good one growmies. Check out this led on website 💪👍💪 https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!
Likes
2
Share
@Quantum
Follow
Wow, wow, wow; the Cronk nutrients have worked wonders on my girl. She is bigger and better than ever. I am now using the Cronk recommended Intermediate 5 Part Nutrient System. I can't wait to use their Bud Booster!
Likes
7
Share
All right so, here we are beginning of week 6 and the gorilla girl, looking amazing like she has been. The DP on the other hand not so well unfortunately. I've been fighting a Calcium deficiency possible magnesium deficiency and I'm getting my ass kicked. So we're going to hit her with some cow mag and go from there I guess.
Likes
8
Share
Did some heavy feeding the past few days now getting reading to flush soon, end of week 6 last feeding now flushing for the final weeks.
Likes
10
Share
They took a long time to grow and mature 10 months in all. They produced amazing flowers with a genuine high. Left a lot to be desired in flavour profile however not awful to smoke. Would grow again for sure as they were a high yielding, ‘set and forget’ type of strain easy and resilient enough to grow and highly impressive to see grown outdoor.
Likes
4
Share
Dieses Mal wurden beide defoliert zum letzten Mal vor der Blüte ich werde beide voraussichtlich in einer Woche in die Blüte schicken beide sind sehr potent und sehr gesund !
Likes
2
Share
@Bluemels
Follow
Tag 25: Beide Pflanzen sind gut gewachsen in der letzten Woche.
Likes
60
Share
@m0use
Follow
Ok, so I forgot to update this last week. woops, I will try and remember all the details but im sure to be forgetting something. I decided to strip the plants a bit as I felt their bottom half under the canopy was a bit to thick and under performing It has a bunch of shity stems and buds trying to develop and they where looking sad and spindly, not enough light, If i had under canopy lighting sure that's fine I'd leave em and they would thicken up, but I don't; so they had to go. I selected defoliation as a techniques used but I did not touch anything in the canopy. only below it, it was all not performing well and would have just increased the risk of bad airflow and maybe rot come late flower. I also have been noticing more issues with the one plant then the others and my hydro shop guys said it need more feed, I don't know how much I agree with them about that, they do not grow with amendments but it was time for the topdressing anyways. I mixed up the stuff and worked it into the top soil of the plants outside on the deck, when watering it in I also mixed it with my hands, I found this helps hydrate the Gaia Green powders and prevented them from forming dry pucks in the top layer. I think I need to always do this morning forward with all top dressings as just mixing it into the dry soil then watering is causing to much resistance and the top layer then gets a little bit crusty and hydrophobic, but mixing in while watering at the same time has prevented that from what I can tell. I also gave them a bit of a liquid soluble calcium as the PH was creeping back up again and didn't want that to be locked out. It helped to green up some of the plants again still the one is a bit to yellow for my liking. The top dress consisted of AP 4-4-4, PB 2-8-4 and some IF 3-2-4 Mixed it all up with something else can't remember, probably fulvic acids and magnesium. I also did a bit of a calibration on my tools as well as I felt they might be off a bit. The EC was not to bad, off by 41ppm or 0.082EC vs the base solution, my unit is a 500 scale pen eg. 500ppm=1.0EC PH was a bit more off by PH 0.18 from the PH 4.01 calibration solution. I did not do a before for the PH 7.01 calibration solution as I started at 4.01 but its still close enough in the end at PH 7.03. The storage solution is almost always the same as the PH 4.01 calibration solution. In their manual it says if you don't have any storage solution just use the PH 4.01 calibration solution. I feel they maybe the same thing but one has red dye and some stabilizers in it. Who knows. O and when working on my deck garden I was upcycleing the old cannabis growing mediums into the planters from the strawberry tent grow off, the one shaft from an older plant was purple inside when I broke it. It sat outside all winter so who knows what it was, I'm guessing its just anthocyanins or something similar. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you're interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.woodroom.tel/grower/MedicGrowLED
Likes
18
Share
I'm pretty much on auto pilot at this point.. im still just feeding compost extracts to keep it simple. There's a couple things I want to point out this week; I've also included a video of my cheese auto and no extra cost to the reader 😅🤣 PROCESS/ENVIRONMENT CHANGES - I've lowered the temp inside my tent a little bit to help keep my VFD between a good range for flower (1.0 - 1.5). I also changed the RH on my humidity controller when the temperature goes down after the lights go off. It's kind of a hassle but it's the only way I can stay in the range I'm looking for. - I've started to raise the pH of my water slowly... I want it to be between 6.6. And 6.8 at this point. - I've increase all my lights.. my Sf4000 is at 85% intensity and both my Ts1000s are sitting at around 75% intensity. - I've increased all my fans running. My intake is maxed out, my exhaust is on '6' and my fans inside my tent are all maxed out.. the cheese auto is drowning my entire house out hahaha its crazy. -I've cut off a whole bunch of fan leaves, larf, bottom branches and a bunch of other unwanted stuff.. I'm hoping that she thickens up fairly like some of her sister's in the tent 🤞 cutting off all the unwanted junk might help at least move more air at the bottom of the canopy.. at most it will help direct energy to other parts of the plant therefore producing a better flower. If she does fill out I'll have to support her side branches so they don't fall over. - Every day I rotate the plants in my tent so that the get to experience the light in different ways. Add me on IG for more updates @Wrongholn519
Likes
17
Share
week 12 ill be flipping those plants tomorrow cant wait to harvest those nuggets they are gonna be huge 😀 lets cross fingers and hope for the best.day 1 of flowering i love my hortilux 1000 hps 😀 last day for week 12 im changing water tonight and onto week 13😀
Likes
28
Share
Plants were looking terrible this week. I use a humidifier and I am In a hard water area. Well I wondered why the exhaust fan I had to keep adjusting and researched and the hard water had clogged the carbon filter. Ordered a new one costly mistake. Anyone know exactly what the brown patches are. I assumed a calcium deficiency due to lockout as I was adjusting ph to 6.3. So I flushed through with 6.8 and they perked up the next day. I added calmag to be safe. Also suffering cold temps at night so could have been phosphorus deficiency lockout (only guessing) so I have increased temps at night. Never had these issues in veg before.
Likes
1
Share
@diiiiii
Follow
At first, I couldn't adjust the temperature, but when I did, it soon increased mmmmmmmmmm
Likes
22
Share
Scrog before preflowering. Add new photos 3 days more grow
Likes
13
Share
Hola a todos, día 67 de floración y ya estoy disminuyendo gradualmente los nutrientes, al parecer la grabadora que instalé para los timelapse produjo un desorden de sueño en las plantas, comencé a notar desde la semana ante pasada ramas en estado vegetativo y espigamiento general, espero que esto no cause tanta merma en la producción, tape los diodos de la grabadora con aluminio aunque aún deja salir un pequeño haz de luz, de todos modos la última semana esas ramas empezaron a desarrollar flores así que asumo que el problema esta resuelto. Aún falta bastante trabajo, saludos!