Likes
Comments
Share
Likes
36
Share
Day 135 14/09/24 Saturday De-chlorinated tap water pH 6 with Plagron products. Day 136 15/09/24 Sunday Light top up of 2L de-chlorinated tap water pH 6 only. Day 138 17/09/24 Tuesday Feed today using de-chlorinated tap water pH 6. She is stacking now 😁💚 Picture and video up, ✌️😎 Day 140 19/09/24 Thursday De-chlorinated tap water pH 6 only today. Day 142 21/09/24 Saturday Another feed to push this week they seem to be handling it 💚. Fattening up on the buds now and pistils starting to mature. Day 143 22/09/24 Sunday (End of week) Damn!! Noticed I have leaf rollers!!! Damn caterpillar, from moths. So I have removed affected leaves and areas.💚
Likes
2
Share
@Shefman93
Follow
The healthiest plant I've grown so far, no signs of any deficiency or stress, yet the buds are developing slowly. The slow bud development may be strain specific, but I am not sure as it's my first time growing this cultivar. Looks like a 10 week flowering period run.
Likes
1
Share
@Kraken85
Follow
Bouture + commentaires... Co2 Maison Gélifié : ,agar-agar, levure de boulanger en cubes, sirop grenadine, BICA = bicarbonate de soude + eau. Silence : ça pousse ! Début du 2ème Cycles 01/05/2022.
Likes
19
Share
@Paultemp
Follow
Hi all! 👊😊 Another week started ohh yeaahhh I do foliar 3 times this week and i see pistil white change in orange Smell very good pine and citrus :)
Likes
18
Share
Bud sites are producing black/purple spot in leaves. Bud growth is producing as the days go by. Really excited with this being my first grow Nitrogen boost really helped with the deficiencies. Plants are starting to look really heathy... Prunes lower colas that weren't stretching past the canopy and receiving energy so more energy can be used towards the top buds
Likes
11
Share
@artems
Follow
Marker didn't take well to the mainlining process; as a result, one cola was almost entirely consumed by mold. However, overall, things are looking good. I ended up with a small, resilient plant with a nice aroma of pineapple and Skittles, with hints of gas towards the end. 🍍🌿 Towards drying and curing now! 🌬️🎊
Likes
12
Share
Sick and Stoned Full Garden Update: Super Cropped with Low stress Training for Big Bushes and Bulbous Budz! AutoBlueberry 13th w/ 8th W/ Flower breed by #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany No 6th feed of #NukeHeads Nutrients #PlutoniumBloom this week, I've been Flushing her out for the last 5 days w/ 2 gallons a day w/ some Cold Declorinated Tap water and Checking her Tricks every few days till she's Ready for Steady! Lol These Lush Ladies and those Awesomely Purple Budz with Trippy Trichomes Growing on! I made and/or converted one of my Budz into a Polyploid (Bigger and More Bulbous Bud) This AB is Flowering out and her Smells are Super Strong of Gasy and Candied Blueberries! I recently Trained down her branches to expose more Bud sites and Removed the Biggest fan leaves to expose the Bud site's to this Glorious #BloomPlusBP1500w #GrowStarQB1000w #OsreeQB1000w Full Spectrum Grow Lights! I've also Super Cropped, Topped um, Defoliated, Leaf tucked, and Implement the 3D's method like my Broski #TigerfishOrganics to remove the Dead, Dying and Diseased leaves! Origin:Afghani/Thai Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:56 days THC:22% Harvest:400-550 g/m2 Height:110-150 cm They were Growing under the #Growatt600w and in my #TopoLite 24×24×48 Grow Tent but I've Upgraded and Updated it to my #OsreeQB100W I'm also using #TNBNaturals #TheEnhancer Co2 Despersal Canister and using thier Ph⬆️⬇️ for my Decolinated Tap Water! Green and Growing Up Great! She's Growing into her 9th week of Flower! She's Growing in my special blend of ProMix potting mix, a 1/2 bag of Earthworm castings and 2 light handfuls of Diatomaceous Earth mixed Up well for before transplanted! Diatomaceous Earth: Diatomaceous earth is made from the fossilized remains of tiny, aquatic organisms called diatoms. Their skeletons are made of a natural substance called silica. WHAT IS DIATOMACEOUS EARTH? In a nutshell, DE comes from the fossilised remains of small marine organisms called diatoms. Over a 30 million year period, these hard-shelled algae collected on the bottom of bodies of water, eventually forming into a type of sedimentary rock. Fast forwarding, it wasn’t until around 1836 that a German peasant Peter Kasten discovered the ivory-coloured, powdery substance while drilling a well in northern Germany. Ever since, the usefulness of DE for multiple purposes, including industrial and horticultural applications, has been well-reported. Just sprinkle some diatomaceous earth on top of your soil and watch mother nature's secret weapon work its magic.CONDITIONS THE SOIL When it comes to growing cannabis, everyone strives to provide the best soil to grow the best plants—but there’s always a way to make it even better. Making the soil a better medium is called soil conditioning, which is exactly what diatomaceous earth does. It works by improving the retention of moisture in your potting soil, holding a large amount of fluid and drying at a rate that’s much slower. This natural soil additive also helps to retain nutrients and allows for better oxygenation of the substrate. NATURALLY CONTROLS PESTS DE is an all-natural, safe-to-use substance that doesn’t harm the cannabis plant with toxic chemicals. The nature of diatomaceous earth makes it useful against most types of insect infestation you might be experiencing; and unlike chemical insecticides, insects can’t develop a resistance to the effects of DE. So once they’re gone, they’re gone for good. DE is an abrasive. and when used as an insecticide, it gradually scrapes away an insect’s exoskeleton, absorbs the fluids, and dehydrates insects and other critters to eventual death. IMPROVES PLANT STABILITY When using DE in your soil, it can be especially beneficial as it frees up nutrients so that they are made available to the plants as needed. This works via the silica content of DE being absorbed into the plant tissue, which helps improve the plant’s ability to respond and receive more nutrients as DE activates. This in turn results in greater yields and better stability under small pH fluctuations! https://divineseeds.net/ https://instagram.com/divine.seeds?igshid=osxe2v7en33v https://divineseeds.net/ Thanks Again to All my Friends, Family's, Teams, Sponsors, Followers and Subscribers!!! Your Genetics are Merry Magnificent, Mega Marvelous and Mighty Medical! Love um!!! I really Can't stress enough how Thankful and Grateful I am of All of you and what you've Shared with Us! Means the World!!! It's definitely a Pleasure being able to Grow with these Phenomenal Grow Lights! Please Enjoy! BudBrothers4-Life! Cheers Famz!!! Much Props and Much Topz!💯🔥 #BloomPlus #Osree #GrowStar #Growatt #TNBNaturals #TNBTeam #GrowYourOwn #Bliss https://instagram.com/bloom.plus?utm_medium=copy_link https://instagram.com/growstarstore?utm_medium=copy_link https://instagram.com/osree.light?utm_medium=copy_link https://instagram.com/as420.ca?igshid=1f116alw054wp The Grow Bags: https://www.as420 https://instagram.com/tigerfish_organics?utm_medium=copy_link TN Tonny Dual headed Clip on Fan Amazon Link: https://www.amazon.com/dp/B07PJH8CDT/ref=cm_sw_r_cp_awdb_imm_6E4BCKYN6HTAASNQDJSM?_encoding=UTF8&psc=1
Likes
16
Share
@GRow_M8s
Follow
* All plants had one feed last week with some PK soluble ( SODK one more feed this week). The rest of waterings are tap water with some microorganisms in. * No new deficiencies spotted (except stomper#1 & 2 from last week), PK gives us the last boost. * Buds progressing well with a lot of crystals, smells are medium and so glad about that, promising though after curing properly. * Lights at 35k - 40k Lux. * humidity 45% - 60%, temps 20C° - 25C°. * D53 --> Fixing the canopy with a bit more aggressive LST to all the plants, except the main stem of stomper #3 (the stressed one). * D56 -> Final day of week 8 and the most mature plant is the stomper#1 (the plant with the early LST and most affected by N toxicity in early stage. - Trichomes are looking like 10 days before harvest, letting the other 5 plants enjoy more light. Week 8 --> finished ✅
Likes
8
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Snipped another couple leaves which were annoying me 😅 I realised this is one of the pots I put my clay pebbles the bottom of. So I've probably not been watering enough, as she's right at the back, and assuming all was good because the pot was heavy. I went ahead and gave all the plants a thorough watering each with: 2ltrs of dechlorinated water, PH'd to 6.2 with:- ♡ 4ml of Xpert Nutrients Cal-Mag amino acids. ♡ 4ml Biobizz Bio-Grow ♡ 4ml Seaweed extract liquid Going to keep an eye out to see when they need more in next couple of days. They're all looking very well, except the slight colour fade on Bubble Kush
Likes
30
Share
10/31: I fed today with one, signal, sweet & sticky, beastie bloomz, and silica. Forgot to take glamour shots, but will tomorrow...they're getting fat and frosty! 11/4: Fed with one, signal, sweet & sticky, beastie bloomz, silica, and humic acid. They are frosting over very well now and still fattening. Interesting aroma...very sweet, but has a hint of English toffee..
Likes
1
Share
•Seconda settimana• Buongiorno ragazzi Entrando nella seconda settimana ci siamo accorti che nonostante tutte le precauzioni qualche foglia restava gialla, sempre quelle sottostanti. Da notare che la pianta cresceva benissimo e i pistilli aumentavano di giorno in giorno. A metà settimana circa abbiamo aggiunto 15g a pianta di top dress flo, un preparato organico che è risultato molto efficace e positivo per la pianta, irrigando regolarmente come sempre senza però l’aggiunta di melassa, solo acqua. Per sette giorni dalla somministrazione. Arrivando quindi fino a metà della terza settimana. Ricordo di aumentare sempre la dose di acqua, controllando la pianta e rimanendo sempre costanti nei giorni.
Likes
3
Share
@HerbHare
Follow
Day 84 Cut and hanged to dry. Day 97 Trimmed and put in jars to cure.
Likes
14
Share
@BruWeed
Follow
🍀Estuvo bien en toda su etapa, no tuve ningún problema. Los resultados fueron muy buenos, se encuentra muy resinosa y con aroma a dulce. 🍀En total saque 143g de una sola planta. 🍀En total estuvo 105 días de vida desde su germinación. 🍀Recomiendo esta genética, por el momento son cocos Premium, ya quiero probarlo para saber que sabor tiene. 🍀Ahora se encuentra en etapa de secado, cuando ya estén para la etapa de curado subiré más imágenes. 🍀🇦🇷Podes seguirme en Instagram como @bruweed_arg🍀🇦🇷
Likes
13
Share
The ladies are looking good 3 had a rough start but it was either ph or nitro deficiency somehow...im using nftg#4 for base soil and building a living soil...I topdressed 1/4 cup craft blend and 2 tbls Bokashi...
Processing
Likes
9
Share
@tonipuppy
Follow
Hey guys its week 8 and i think i have two plants herm!!! Shit!!!i am not very sure because they didnt receive any dmg all these days but i saw some balls but the most of them are with little hair.all the seeds was feminised but i really dont know wtf happened!!! Finally i decided to cut off the two plants with the fcking balls!!!
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Processing
Likes
19
Share
@Bshoe421
Follow
Flowers are starting to pack on weight, colors are starting to show and this plant is super sticky. Can't wait to see how she finishes