Likes
Comments
Share
@Ninjabuds
Follow
The Gorilla Runtz harvest was phenomenal. The buds are incredibly dense and pungent, packing a serious punch. Its compact size meant nearly the entire plant was covered in frosty buds, making for an impressive yield.
Likes
8
Share
My medium starts to gather salt because of too much nutrients and it affects the plant, i washed it the last two waterings and I hope it’ll get better :)
Likes
27
Share
I'm loving how easy these ladies are growing. Watering every 4-5 days. I water 10 liters each time. Every now and then I pick a few leaves that might block other buds and thats it. It's a nice and steady grow up till now.
Likes
8
Share
@JohnWeed
Follow
Hello guys, I had less time to updated these time However the girl are in bloom and are doing well I start this week 3ml/L biobloom and it is very good the buds start to inflate well
Likes
74
Share
@Mr_Maes
Follow
This week we should really see these colas blow up and start stacking really strong. The mixer of 7 hours of sun and 17 hours under my LEDs has really helped my girls grow strong. Nothing compares to good old Mother Nature.
Likes
5
Share
The girls are looking better and better each day. They have finished whatever stretch they had begun, and are now stacking some very decent buds 😊 They are showing some phosphorus deficiencies, but at the same time are showing that they are getting some nutrient burn 🤔🧐 I’m used to making one solution to feed, and that seems very difficult to balance with some of these Auto’s, as I have had to adjust for these girls and not my others, anywho, the joys of Autoflower’s ❤️ Only a few weeks left, hopefully we’ll get through it as they are looking promising at this point. Happy Gardening 👊🇨🇦❤️🌱
Likes
7
Share
@Do_it_Dan
Follow
First week of germination went to plan, this lovely little lady is springing to life, transplanted into a nice 20L pot and I'm in love haha 😄, going to be adding another sf2000 into the tent aswell, just think for a 1mx1m tent this amount of light will be sufficient for the whole grow space, thanks for reading and hope to see you all on the next week update 😀 peace ✌️ and stay green 💚
Likes
4
Share
Flowering day 77 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
9
Share
9/22 topped them at 4th node. some of them are looking better for mainlining that others. some of them i may not mainline and others i left an extra node in case i want to keep clones around. #1 is looking happy with the topping and looks really good. #2 is the only one thats been praying and is the tallest and strongest looking all around. #5 short and such tight internodal spacing that it makes it hard to see whats all there. just looks like a bunch of small leaves until they grow out. i may not mainline this one either be cause of it being so tightly packed it may make it 9/27/24 day 20 theyre growing quite well. #1 i ended up taking the bottom nodes. i was originally goi g to use them as clones later on but decided to just let her go with her 4 nodes. #5 is so tightly packed, she has like 8 mains all in such a small space, its hard to even make sense of it all.
Likes
8
Share
@Kirsten
Follow
14.1.25: I've been readjusting the LST. I just took all the pegs out and reshaped her. I got some new LST equipment in the mail today, have been glad to have more pegs. I got some clips too, but they don't seem to stay on 😕 I'm currently only using the pegs, I have some thicker soft wire, but I forgot I don't have pliers to cut it! Also I'm running very low on Biobizz nutrients, so that could be bad 🤞 17.1.25: I'm quite disappointed that I didn't use a 5 or even better my 10 Gallon pot for PPP2 and even PPP1. Especially the PPP2, which is the Triploid pheno. I'd love to have given her the best conditions to see the full potential! 😕 Obviously, I didn't know when I popped the beans, but it just feels like a wasted opportunity to learn, and that's hard to swallow for me. That's my whole aim with these plants. Despite my regrets in that respect, the plants are both looking great! PPP3 is literally just taking up prime real estate 😑 I can't bring myself to trash a plant, though. Plus, it's interesting in and of itself. Just being as it has stayed so small and only has 3 fingers in any of its leaves in week 10. Continuing to adjust ties and pegs as often as I can, trying not to overdo it. 18.1.25: I have done another large defoliation on PPP1 and PPP2. Also, moderate defoliation on all other plants today. All LST ties and pegs are readjusted. I have turned up the light to 90%. Same distance of between 24-28 inches, depending on height of specific plant. I have increased the dosage of Biobizz Bio-Grow and Fish Mix to give an extra boost of Nitrogen as several plants were showing yellowing. They have responded very well to this. Unfortunately I ran out of my Biobizz nutrients and PH UP. I'm currently using Bicarbonate of Soda to increase the PH after the nutes PH comes out to about 4.1. Obviously, that uses a lot and I only had a 250ml bottle, which I used last run too. This run I have 9 plants. The only thing I'm worried about is the salt build up. Have you used it before? Or any other natural way to increase PH? Please let me know! I've also added Biobizz Fish Mix to help with the extra Nitrogen needed. Watering with 1ltr of dechlorinated water PH'd to 6.3 with the following nutrients;- ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish. I water with this every 3 days. I did order some more Biobizz Bio-Grow and Bio Bloom. I found some at a reasonable price on Amazon. I still have about 800 ml of Biobizz Fish Mix left, too. It is fairly expensive this time as the plants are hungrier this run. I also got a new bag of Canna coco, which I may use to add a top dress with some dry amendments. Which hopefully will save some cash on the bottled nutrients and stretch out until the end of this run without having to buy anymore. I have purchased a funnel to pour the water. It is difficult, due to the shape of my LST, to water precisely. I have spilt it all over the tent several times 🙄 I've also ordered a 2 litre jug. Currently, I'm mixing water for 9 plants individually in a 1 litre jug. It's tideous. Hopefully, this will solve the issues. Cleaning the tent after watering every time isn't my idea of efficiency 😅 Thanks for checking out my diary 🍃 ✌️
Likes
14
Share
@Kirsten
Follow
12.5.25: I watered with some more Trace again. She's feeding well and needs watering more often again. I upped the dose of Trace as I've noticed that there are some purple hues coming back on the stems. 13.5.25: I have removed all fabric ties on the plant. I think we have stopped stretching, so the sooner, the better. I keep getting my watering can caught in them all, and it was only a matter of time before I ended up snapping more branches off 😅 The fewer things in my way, the better 🤫 15.5.25: I watered today as the pot had dried out almost. The plant was watered with dechlorinated water PH'd to 6.5 with the following nutrients per 6.5 litres; ♡ 7ml Trace by Ecothrive ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients The plants received the amounts below. HULKBERRY: 1l FASTBUDS: 2l NORTHERN LIGHTS: 3.5l I am not giving any further nitrogen at this stage. They had a couple of doses in the past week or so. I'm sure they don't need any more. So, I'm just using the kelp as it's packed full of goodness and high in potassium. I also suspect an excess of phosphorus. So I'm also leaving that out for the time being. There are still some red stems on the plants. added the Ecothrive trace for the last few waterings. I'm hoping it will resolve without any further intervention. 16.5.25: I watered Hulkberry with 1.5ltrs of dechlorinated water PH'd to 6.4 with: ♡ 1/2 Tsp Sea K(elp) by Greenleaf nutrients ♡ 7ml Trace by Ecothrive Measurements per 6.5ltrs. PPM: 670 PH: 6.4 17.5.25: I watered again today with 2ltrs of the above PH'D to 6.2. Parameters remaining the same. The plant is increasingly thirsty, so the waterings have again needed to be increased. As we're reaching deep into flowering, this is par for the course. I'm mostly using coco, perlite worm castings. Etc. So it's very easy for my pots to dry out. I need to keep on top of it. As the pots dry out, the microbes are lost, and so keeping everything moist and healthy is imperative. That's why I add Ecothrive Biosys regularly to ensure I keep up with the microbial life in the soil biology. To avoid PH lockout. 18.5.25: I watered again, with the same parameters as yesterday. Instead of Sea K, I used Ecothrive Biosys: 1/2 Tsp/6.5l PPM: 550 PH: 6.4 Thanks for checking out my diary and hanging out 💚✌️ 🍃 😊 🌱
Likes
2
Share
Week 7 of Bloom just one more week to harvest!!!
Likes
7
Share
@Bills1995
Follow
Added co2 to tent, added molasses and big bloom to nutrients for pyramid purples. Looking to veg For one more week. Reminder my diary is from seedling so veg is more like 6-7 weeks instead of 8. STAY TUNED. Youtube search “ nugg man95” need ideas for videos!!
Processing
Likes
7
Share
@Kushizlez
Follow
(Days 21-28) (Day 23) I like the amount of stretch I’m seeing on practically all the plants. I'm going to lower the light at the end of the week to stop the stretch. The more stretch they get in veg the less I have to lollipop or prune down the road. Makes lst easier too. I’m going to try topping this week. Last time I topped at the 7-10th nodes and didn’t get the best horizontal growth. This round I’m ready to give everything 3 or more toppings, stay on top of training and defoliate much less. This soil looks insane. I should have added a thicker layer of oats because it’s starting to look proper. (Day 24) Got my stuff from the hydro store today and amended my soil again. Next visit I will be grabbing a P booster like bat guano before I enter flower. Today, I got the 2gal pots, some primo worm castings, 5-2-4 insect frass, 0-0-22 langbenite, 1-0-3 alfalfa meal and an exhale co2 bag. Guy at the store said it gets his 4x4 tent 1000ppm+. It takes a few weeks at least for it to start putting out any amount of co2. I got the room sealed and two fans bowing. I fed a compost tea with a little bit of each dry amendment, BSO dry compost, boogie brew base and worm castings aerated for 24h. I diluted it to about 850ppm which still might be a little high. (Day 25) Opened a bottle of EM1 that was improperly stored and it exploded all over me and part of the tent. I wiped off the plants but there is still specks here and there. Cleaned it off and sprayed with method1 pps. (Day 26) Topped 9/15 plants. Will do the rest next week once I see a little more growth. 5 of the bbb’s I started 6 days after everything else so they are still quite behind. I’m going to push the transplant another few days until they recover. Going to start lst after transplant. (Day 28) Transplanting into 1.6gal pots that I thought were 2gals tonight... Depending on how many females I get, they will be going into either 3, 7 or 10 gallon fabric pots. Growth is looking solid so far, zkittlez and the 3 WW’s are leading the pack in terms of growth speed and cotes are yellowing out. I’m pretty sure what I have is a zkittlez bagseed but there is also a strong chance it could have been from some shitty Canadian biker weed. I accidentally misplaced the seed so it’s possible it got mixed up and I germinated the wrong one. Judging by the rapid growth I’d say that’s a fair bet. Biker weed is notoriously fast growing. Either way it won’t be hard to tell once they’re in flower. The white widow is probably going to be a breeze. I’ve heard that’s why it’s so popular too. It’s just a hardy rookie strain with good resistance, decent quality and above average yield. A sure investment. The blackberries are lagging behind but I’m sure they will blow the others away in terms of quality. One of the tunas looks great and the other is a stubby runt. The stubby runt I currently have in flower is killing it right now so I’m not writing it off yet. Can’t wait to see if the tuna god produces some nostalgic smells. Tuna strains are still super popular on the Canadian black market. I plucked the first set of leaves that were starting to appear on each plant. These branches almost always turn to larf and they're so small I can't that stressing the plants out at all this early. If anything, the zkittlez and white widows need to slow down a bit anyway. I’ve been doing a shit ton of research over the past year into what causes weed and cigarettes to have black ashes/poor fire holding capacity. Smoking black weed drives me crazy because it’s all the legal and black market have nowadays. The cigar industry has numerous studies on the cause of ash color and burn rate and apparently it has to do with the ratio of mineral content in the soil/water. Soil/water that is high in phosphorus, magnesium, chlorine and other heavy metals will burn poorly and reduce to flaky black ashes. Whereas soil that has higher levels of potassium and calcium carbonate have thick uniform white ashes with no streaks. Calcium carbonate (wood ash, biochar) can also prevent heavy metals in the soil making them unavailable to the plant. I’m discontinuing my “Organic cal mag” as it is full of chlorine which I did not realize when buying it. I’m going to be pretty cheesed if that stuff ruined the burn of my current flowering crop. My dog also found and destroyed my Alaskan fish fertilizer so that’s being discontinued for now too.
Processing
Likes
23
Share
Likes
12
Share
@SpliffDoc
Follow
Getting dense now, really enjoying growing this strain, I'm excited to see the end result in 3/4 weeks. Let's go.l... Have a good weekend people, stay high🏻😉💚
Processing
Likes
51
Share
12/15: Some plants are taking too long to transition and stretching beyond my space constraints, so I dialed the photoperiod back to 12/12. 12/16: Fed today and rotated edge plants. Added another 150w of 3000k below the canopy. Sucrose Overdose and Muscadine Wines are still stretching...raised lights again. 12/17: Worked on ventilation...no A/C necessary now, as I'm using another AC Infinity 6" fan to intake outdoor air into the closet whenever temps reach 75f..and it's been cold as hell outside.👍 The final trick will be to replace the 6" exhaust fan with an 8" so as to be able to fully exchange the closet air faster ...but that's gonna have to wait til next season. 12/18: Supercropped a Muscie... again... now she's doing the "letter 'S' thang. I'll force the curves tighter over the new few days if she keeps stretching.
Processing
Likes
14
Share
В нашем регионе, аутдор бесполезен :) Проще было все эти семечки вырастить в индоре. Всем спасибо за просмотр =)