Likes
Comments
Share
@Anon73
Follow
Week 5 and the plants are bursting out now. I am very pleased with the electroculture, seems like the bugs do not want to touch the plants.
Likes
15
Share
Нам уже мало места, много новых стволов после lst, жду на днях новый гроубокс и лампу, так же через 2 дня начну вводить GHE nutriens
Processing
Likes
2
Share
This is my personal favorite strain. We bred it a few years back and I get a few clones every few months to grow. Thought I'd share it with you all. Yes this is a mess. Yes the buds are getting too heavy. Yes there is a lot of sites that prob could or should have been stripped. BUT. Thats not what I wanted to do. I topped it very young and then fimmed it about 8 or 9 times after that. So the branches never really thickened like the other plants I show at the end with the huge stems. Since I have a pretty much unlimited amount of this strain(provided buddy keeps the mother in good shape like he has been) I've been trying different things. This is just a side project and I had no real plan to diary it but I figure the more I fo the better chance I can get sponsored so I can keep doing what I love to do. Grow weed!!!!!!!!. Thanks for the support you guys and girls have been giving me its appreciated. Also shout out to all my Canadian friends here on GD.
Likes
29
Share
This C4 auto was very fast to flower, and stretched up to produce some very pretty, berry smelling/tasting nugs! The buds didn't flower very dense, they formed as fox-tail shapes. Yield is on the low-end of acceptable, but good considering the bud structure! I'm growing another next run, to compare phenotypes!
Likes
7
Share
Likes
37
Share
@Whitey307
Follow
Hi all just finished another week having trouble with humidity since fan went marshydro said they out of stock but will send me a new one the minute they have it in which is a month haha 😄 all be harvest by then hopefully god help neighbours that's all I can say haha bought a new dehumidifier off amazon a shit cheap one not even making a difference at all haha so today splashed out a 100 euro for one so hopefully that'll do the job. other than all looking good I think. But actually if someone could tell me will I defoliate more leaves she very bush bit I'm afraid of disturbing flower so im leaf tucking but she is very bushy haha. also im looking at other diarys on this and my plants buds not as big or as far along as many im on 9 weeks on the dot at the moment if anyone with more knowledge please let me know. Anyway i lowered light again and up nuts a little bit and on we go one week closer to be stoned hopefully Enjoy all thanks for stopping to have a look and for comments +help. keep growing and blazing.
Likes
26
Share
@Sickone
Follow
Die Samen wurden am 08.04 in die Erde zum keimen gesetzt und bereite 3 Tage später sind 2 von 3 gekeimt und haben das "Tageslicht" erblickt. Keimlinge Nummer 4 kam jetzt 2 Tage später mit kleinen start Schwierigkeiten die Samenhülle wurde abgestreift jedoch befand sich eine weitere Hülle um den Keimlingen welche er heute an final abgeworfen hat. Woche 1: 08.04 - 15.04 18/6 Lichtzyklus Lichtabstand 30cm (China LED 100w aktuell - Mars Hydro FC 1500 folgt demnächst) LUX 7000 IN 18h 16DIL 18h Temperaturen zwischen 24 und 28 Grad nach vollen 18h Beleuchtung. Luftfeuchtigkeit zwischen 50 und 69% gehalten. Am 13.04 habe ich einen kleinen Ventilator dazugeschaltet ihn aber nicht direkt auf die Pflanzen gerichtet sondern nur auf die Wände damit die Luft Abprallen kann und so die kleinen sich langsam aber sicher daran gewöhnen können. Um die Luftfeuchtigkeit etwas aufrecht zu erhalten habe ich zusätzlich ein feuchtes desinfiziertes Tuch oben in das Zelt gehangen und halte dies bei Bedarf feucht da ich meinen Autoflowern noch kein umtopfen zumuten möchte und die "Domkuppel" zu klein wurde um die Luftfeuchtigkeit so zu regulieren. Stand nach Der 1. Woche Die beiden großen Ladys sind mittlerweile knappe 5cm in die Höhe gewachsen und fangen schon an das 2. Blattpaar auszubilden. Die kleine Lady hat sich von ihren start Schwierigkeiten gut erholt sie misst aktuell gute 3.5cm sie fokussiert sich meines Erachtens auch auf die Ausprägung der Blattpaare.
Likes
6
Share
@rvabudman
Follow
Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.
Likes
37
Share
Cut out the nitrogen this week, they received two feedings this week of only micro, bloom, and big bud! These girls are super healthy and absolutely loving life! Very large plants! Looking like they will be an xl harvest! Check out my other grow. Blue dream matic!
Likes
14
Share
And within less than 40 days she was full on flowering.... How fast will I be able to finish her?
Likes
22
Share
These ladies are stacking up and getting frosty! Fastbuds always gets so frosty! They are growing fast and easy. Thank you for the opportunity fast buds! I will add more pictures as grow diaries shuts down each time I try to upload. It's a pain.
Likes
27
Share
Week 5 for Kalini Asia by Zamnesia, Shes still doing very well, looking happy. She was topped once again for now shes at 8 tops. Her new pot is cooking atm for a week or 2 before i transplant her into her final pot. Have been fighting high humidity but atleast i still in veg😅 Will be buying a dehumidifier for flower time.
Likes
14
Share
I AM GROWING ALL AUTOFLOWER STRAINS IN THE 8X8 GROW TENT 👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING 👍 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
33
Share
Likes
39
Share
5/8/25 Chopped at day 65 of flowering. Will update more soon. Not sure if the plagron product did much of anything. Thank you to Zamnesia and Plagron for sponsoring this Grow. 5/9/25 first day/night of drying and temps are at 67.8 and humidity is at 61% 5/12/25 i had left for vacation for the weekend but when i came back the whole house smelled like a dispensary lol and the humidity was down to 55% sadly but i have it back up to 60% and 67°F. tonight will be day 4 of drying and i suspect theyll be done in the next couple days around day 6 or 7 Eternity Grow Cup 2025 🤙💣🤘
Likes
9
Share
I Should have been chopped down 5 plants instead of just one however I lost her 4 sisters because of fungal infection due to a high humidity and and a very hot day. Wish I could have been able to get a lot of jars full of this wonderful and magical organics nugs.
Processing
Likes
13
Share
On the final few days of a 10 day flush. Will be chopping down this week to harvest and hang dry. Really excited to try this one. The smells in the room are unreal.
Likes
13
Share
Monday Gave her a good dose of sugar Royal, and a bit PK and pure zym, touch of alg a mic, all looks good, buds are filling out nicely 😀 Tuesday Small feeding today, heavy on the PK 13/14 I'm fighting the humidity but it's manageable so far Wednesday Got a very small pruning, I don't want to touch it too much plus i only have a 60cm × 60cm tent its hard to work in it and this is a big f##king plant, to be honest I didn't think it would get this big but its my first grow! I've read that's it's not good to prune autoflowers too much but this things getting pretty dense so I cleared out the bottom a bit for air flow. Buds are really swelling now, and I think they are turning blueish purple?! I can see it on all the big colas and they are starting to get sticky! Thursday No feeding/watering today, I'm starting a flush as of now, today is a dry day for the plant so fresh water only from tomorrow on. Today all I have to do is look at it, and she's beautiful! Smell is really picking up inside the tent, carbon filter is earning his keep now, super good those rhinos and I only have the hobby one! Friday Gave her a hard flush today, it took a LOT of water! Just clean water from now on, it think I'm well within 2 weeks of cutting so fingers crossed it keeps going Saturday Absolutely no work done on it today, its a waiting game now and I think I'm going to win soon! Sunday I decided to take a chance and discard some of the small lower branches, I think I should have trimmed a lot more off much sooner, however my inexperience with a scrog net coupled with the small size of the tent and how big the thing grew its become impossible to move it out of the tent and its very difficult to get into the back of it to lollipop it! 🤣 next one will be much better, this is still going to be a big yield I suspect but lots of smaller popcorn nugs will make up most of the weight, there's still about 3 dozen nice colas tho that will hopefully bulk up more, any feedback and tips would be appreciated!
Likes
100
Share
Giorno 49 Ho girato in fioritura. Le due Zombie come già detto nelle settimane scorse sono due fenotipi completamente diversi. Uno sicuramente haze e l'altro bubba Kush. Stanno bene entrambe ma la più grande l'ho dovuta defogliare per bene e sono certo che tra 15/20gg farò una seconda passata. Ultima bevuta prima di mandare in fioritura EC 1.28 ph 5,8. Anche le due Rainbow Belts sono diverse perché sfregando il gambo una sa di Zkittlez l'altra di frutta quindi penso più a qualche fenotipo dosidos. La Milk Monkey è quella che per struttura mi piace più di tutte. Per la prima volta ho preso dei cloni anche se non so dove tenerli e sotto che luce. Per ora li ho messi in un vaso ricoperto da velina nel box delle autofiorenti