New grow, started December 8, 2020. From clones.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 8 - Sun. 7/22/18 N/A Day 9 - Mon. 7/23/18 2:30AM 1. Fed with 5.8 pH RO/DI water Day 10 - Tues 7/24/18 N/A Day 11 - Wed. 7/25/18 1. Time Lapse Day 12 - Thurs. 7/26/18 1. Time Lapse Day 13 - Fri. 7/27/18 N/A Day 14 - Sat. 7/28/18 1. Light water with 5.8 pH RO/DI water

Vamos familia, cosecha de estas Fruit Cake de Seedstockers, que ganas que tenia ya de darles machete. Que locura la pinta que tienen estas plantas. Las flores aparte llevan una capa muy resinos, y muy prietas, aparte son bien aromáticas huelen bien fuerte. En general es una genética con la que disfruté bastante cultivarla, la genética es perfecta para cultivos de floración corta con rangos entre los 20/25 grados en interior, es bien fácil cultivarla y bien resistente, es excelente para cultivadores principiantes. Hasta aquí es todo, agradecer a Mikele, Giorgio de Seedstockers, y al equipo Agrobeta por hacer posible este proyecto espero que lo disfrutéis, buenos humos 💨💨.

Week or two in to flowering and added canna pk13/14 will continue for a week and a halfand started to trim buds and stems to create canopy

Bin super zufrieden! Alle pflnazen noch gesund. Ein ganz kleiner bleach Punkt mit dabei bei einem headbud von der Purple magnolia aber nix wildes.

Tapering nutes off for the flush. Also added a small amount of Barley as a top dress to help her finish off.

Harvested the second plant. She was smaller bud her buds were STACKED. She is 164g wet so let's hope for an oz. UPDATE: 1.4oz out of the smaller plant for a total of 3.5 oz for the whole grow. Thanks for following along everyone!

Week 8, Day 56, Day 12 of Flower. Well the girl is doing nicely again. All in all things are going well. I did notice a few fan leaves with a slight purpling so I will try adding a little more CaliMagic on the next feed. She is currently receiving 200ppm of CaliMagic. The last feeding was 660ppm total nutes, but 950ppm 1.9EC in the run-off so I gave her some Phed water to help clear some of the nutes building up in the media on the next feed which went down to 650ppm 1.3EC in the run-off. Thinking about doing a flush with some Florakleen, or should I wait until flush time at week 7 and 8 of flower when Trichomes are hopefully milky. All comments and suggestions welcome.

Hola. No había actualizado estas plantas, aquí va. Semana 18. Las plantas ya llevan alrededor de 13 días en riego solo con Flawless Finish, las flores pegaron una ultima engordada y ya están madurando, ambas variedades han adoptado tonalidades muy linda.

Watch my video it explains more. Gunna be giving them water on the next three feeds then back on the bloom, I this k there's enough fertilizer in there for them as I don't RTW Thanks for having a nosey :) any tips advice welcome!! Update. Levelled out the middle. Everythings good. Tallest now 42 inches lol still growing.

A few of the autos have mostly milky trichomes but no amber yet. Maybe another two weeks.

I'm sorry, but at the time I stopped updating the diaries because I moved to a new house and changed my routines. I'll leave a photo of the final product here, but don't worry, I'll be back at full speed. 🚀🚀 new diaries coming 🔜🔜

Week 2 is in the books for the Blueberry Pie! She's done stretching it seems and is now gonna start to pack on the weight. I'm really excited to see how this strain flowers. I defoliated a ton so theres plenty of light penetration throughout the canopy. Tons of buds sights even through I wasn't able to trellis this grow. Going for quality not quantity this time. Staying on the light side with the nutrients. These next few weeks will be fun to watch and see the progress.

Amazing week, she’s working on forming her buds now and they are going to be some thing special 😊 put my ts1000 onto 100% for the last few weeks too! Can’t wait to see her colours! Stay tuned and if your so lucky to pass my diary! Hit the like button it’s free!

Nice development this week. The girl in the back is keep getting taller, I’m impressed. I’m slowly getting back on track with the uploads, I’ve been a bit behind.

Está semana regamos con agua un par de veces y quitamos un par de hojas satélites que tapaban cogollos

6.1. - Plants are looking very good. First branches are already developing, so I guess I will have to start with LST soon. 8.1. - First branches are shooting out, leaves and plants overall are getting bigger. I hope they'll keep this tempo and health. Watered. 9.1. - Today I've decided to apply some LST and I accidentally snapped off the main stem of one Creamatic. I've fixed it back with tape, but not sure how it will end. 😔 10.1. - I've checked the broken plant and decided to remove that part. Plant already started focusing on the branches that are left, so basically one plant was topped unintentionally ✂️ 11.1. - Week wrap-up: Well, this week was half fail half success. Plants are growing fast and healthy, however I've managed to fuck them up a bit as usual. One accidentally topped plant and one with broken but healing branch. I've decided to give up on the LST of main stems completely. I will let them grow up and just spread the branches with wires. Hope next week will be more successful ✌️ 5.1. - 11.1.2024