So were at the end of week one for flower and all the plants are looking great. Over the last week my pineapple kush and old school started growing a bit faster. I'm hoping that by the end of this week I'll be able to take them off the wooden box and still have my even canopy. Well see. Grandaddy Black- she's at 22" rite now and there is a lot of possible main Cole locations Runtz muffins- 22" and not as many as the Grandaddy Black but the plant looks very healthy Pineapple kush and Old School - both are at 17" only got FIMed a few times so they have no where near as many main Cole spots but look really healthy. All and all a good week with lots of growth Happy growing everyone.

It grew nicely but could have been cared for better and might have had better results but it came out much better than I expected it to. Very dense nuggets

Muy buenas mi gentee Por aquí otra semana más con estas increíbles plantas #sherbetz de @artgenetix que vienen con una forma muy top. Color y aroma muy marcado. Ya hemos empezado con los azúcares e hidratos de carbono para ayudar la floración. Riegos con fertis solo una vez por semana, el resto de riegos con solo agua regulada. Veremos cómo siguen la semana que viene.

The color of the leaves begins to turn purple and orange...

January 2 - 8 01/02 A lot of growth in the two days since the last tea 01/03 Topped the smaller one and watered 01/08 Watered & started LST training on the big one smaller one did not need water

day 14 added 1/2tbsp magnesium sulfate in 5gal water along with regular flower water amendments. 1gal of water per day average, bridal and thunder can take more water. Ph 6.8 today day 15 I will defoliate in a few days :) day 15 video, you see some stem action day 16 video day 17 I added (4x20w daisy-chained)80w of poop purple ancient leds Keep adding soluble PK, organic booster etc. I see the stacks relax on defoliation for a few days, maybe tomorrow morning (skip day21) I feel like I will be able to chop week 6-7 as my last grow, push hard fast-continue everything is great, soon bridal and thunder will require 1gal water per day. I would like to see even more mass. I'm extremely happy, starting to see frost day18. BIG UPDATE many short vids of final defoliation(ahead of "day 21"). Wild amendments appeared! Any recommendations for a lawnmower? Bridalparty stretched over an inch overnight, led touch diode burn on 1 spot. Raised lights slightly, Added new amendments into water. Bridal wants to drink more than 1gal per day, So I will be using almost 5gal-ish water per day not denying the plant needs-watering. I am very happy! defoliation took about 4h today.

03/18/2021 Making the switch to 12-12, flowering should Start by next week.

This week I have stepped up the pk13/14 , to produce the pistols quicker

6.4.25: FastBuds Mystery Seed #1: She has been topped twice and is looking pretty strong 💪 She has grown vertically, and leaves are always praying. Possibly too much light, so I have turned the dimmer down to about 90%. There are slight bleached tips on a couple of top leaves. I'm hoping to do the same LST with garden wire here very soon. Overall, the plant has nice big, fat leaves. Seemingly lush colour and vigorously growing since the double toppings. Very nice plant so far. 👌 13.4.25: This week has been so busy in the garden! I forgot to take any notes, so I'll see what I can do from memory! 😅 14.4.25: I have been super busy with all the other harvests in the past several days, so this is a little late. FastBuds Mystery seed #1 has been topped twice and the growth has been thick and lush. I watered several times this week, and I used Ecothrive Biosys with dechlorinated water PH'd to 6.4. I watered about 2 litres to each plant. I have been using wire, clips, and Bio stretch fabric plant ties to LST the plant. The plant has reached the 8 Gallon pot perimeter. The plant is in the first week of flower. I'm hoping to keep the canopy even with my RQS Northern Lights grow as I need to be able to compare the plants accurately for the experiments. I did snap off a branch, again the day after I said I'd be very careful 😖 The plant is very resilient though, and you wouldn't know anything happened at all, minus one of the first tops is missing. Thankfully I topped twice, so I still have 5 tops. Training Techniques used this week are LST and defoliation. I watered on 13th and 14th with the following solution; 4 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 8 ml Xpert Nutrients Cal-Mag amino acids ♡ 1/2 Teaspoon Mega Crop Part A by Greenleaf Nutrients. PPM: 1000. 2 litres were given on two consecutive days. I watered in a top dress, which I will add what I used here, but it was another mess up, I'm sure you'll be surprised to hear 😅 Top dress: 4 gallons containing approximately: 50% Canna Terra Mix soil 25% Worm Castings 23% Perlite 2% Organic Dry Amendments, which were; ☆ Ecothrive Life Cycle ☆ Ecothrive Charge ☆ Diatomaceous Earth ☆ Ground Cinnamon ☆ RHS Mycorrhizal Fungi granules I used the top dress amount for established plants for a pot size of 30L / 8 Gallons. I'm not keen on the soil. I was supposed to get Canna Coco but I got sent Canna Terra in error. It was overdue for a top dress and I had nothing else to use. I don't like it in comparison. Coco is best for my needs. It's much fluffier, lighter, and easier to work with. Thanks for hanging out 🍃 ✌️ 💚 🙂

Man what a busy week. I left for a small vacation with the family and left the plants in the care of someone and luckly everything is still alive lol. Then today I almost forgot to post my weekly diary because I was busy build my new grow office and moving all the equipment in. The room I built is where all the plants well eventually end up ones my coco and perlite arrive. This washing machine strain is growing really strong. Not surprising seeing as how nice ripper seeds strains have bee so far. Only one plant of the 15 ive done has been a dud. Roots are at the bottom of the 1 gal pot and well need to be transplanted soon. Well that's all for now so happy growing everyone.

Week 6. Smells like the most stank sweet creamy sticky oiliness!

Weekly update for these lovely ladies. They've grown and grown since the last update so much I had to raise the greenhouse. Cinder blocks under the frame gave me an extra 16in. They're growing probably a foot of week and still reaching for the stars. I did switch to Athena's Bloom A & B and P&K booster this week giving 5-10ml per gallon. I really couldn't be happier with how they've grown up to this point. All in all Happy Growing.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Super easygoing strain, and fun to grow. Looks like a nice yield but I'll have to update with weight after it's dry. This sweetie was grown in 6 gallons, from seed, under non adjustable lighting from seedling through harvest. Base nutes and cal mag. Ocean Forest/perlite in the bottom 3/4, Happy Frog/perlite on the top 1/4. Trained with a combo of scrog/lst techniques. The lights are two 50 dollar "1000 watt equivalent" Amazon LEDs, they say their max input is 280 volts though so I have no idea what grams to watts will be when the dry weight comes in. Thanks to everyone who checked or checks this diary out, that's pretty cool of you! I'll be back in a bit to update weight and smoke, happy trails!

Octava semana de vegetación y esto luce así, hermosas y vigorosas las 2 Kukulkán, porfin pude solucionar la carencia que tenían, estoy regando con niveles de EC muy altos sobre los 2.0 pero si ellas lo asimilan bien entonces le damos no más, estoy regando con 5 ml de fertilizante radicular y 4 ml de algae plus y 3 ml de calmag. Hoy preparé el suelo donde irán los clones con las micorrizas de elite 91 myco Jordan y tire unas semillas de happy clover, la mayoría de los clones ya están enraizados solo esperaré a que colonicen un poco más el vaso en donde están, estoy muy satisfecho con los resultados hasta ahora, ya que es primera vez que hago esquejes, veremos más adelante cómo evolucionan. Aún no se cuantas semanas de vegetación les daré a las Kukulkán, todo depende de cómo crezcan y cuanto se demoren en el crecimiento. EC: 2,3 PH: 6,4 Temperatura agua de riego: 21 grados Temperatura indoor: 25 grados Humedad relativa : 50%-85%

Pues ya llevan 22 dias a 12/12 horas de luz, han cambiado mucho en estos ultimos dias, ya esta empezando a formar sus flores llemas de pistilos!!

I guess dude was right about it foxtailing but I don’t care and I don’t think I can do anything about anyway. My light is at 50%. She is only getting 600 ppfd and I’d have to check again but I know the DLI is under 30, I want to say it was 25 or 26. Temps never go above 76° lights on but typically stay at 74°. Idk if it is light stress then i don’t understand how ppl run these high wattage lights. Maybe I’ll try the co2 bottle again

FIRST GROW, ANY ADVICE WOULD BE GREATLY APPRECIATED" PEACE

You gnat to do what you gnat to do.