Processing
Likes
Comments
Share
@
Follow
Likes
80
Share
@Zengrower
Follow
The top buds are still fattening up but slower than last week. In the lower branches there are also many smaller buds that have started growing. I guess the plant is fattening up those as well. The flowering time of this strain is between 9 and 10 weeks, so it still has at least 2 weeks to fully mature. The top buds are looking nice and frosty, and the smell is outstanding! More pics will be added after wednesday. I lost my Sanlight dimmer key and waiting for a new one to arrive. And taking pictures with the growlight at 100% is no bueno 😐 🌿🌿🌿 Mid-week update Allright so my dimmer is replaced and I can take more pictures of this frosty lady ✌️ The trichrome production on this plant is more than I have ever seen sofar. My microscope broke down and I'm waiting on a new one to arrive so I can inspect the trichromes more closely. We're entering the ninth week of blooming so the plant should be ready within 2 weeks.
Likes
459
Share
@Ju_Bps
Follow
Hello my friends 👨‍🌾👩‍🌾, This week was better, I've removed the bottles of the #1 and #2, both look really better and happy. The #3 finally to wake up ⏰, still covered by bottle for humidity. I vaporise 2 times per day with water + rhiso @PH 6 Lamp is now 100% See you next week. And hope will be better 💪👌 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Vannila T https://www.thehighchameleon.com/shop/vanilla-t-5
Likes
6
Share
Tip - Before every watering I ensure to leave the water rest for a minimum of 24-36hours to allow for chlorine dissipation.
Likes
60
Share
@SooSan
Follow
13 jours de 12/12 OK il y a du changement ! Dans la partie du scrog vertical le stretch n’a pas été assez fort J'ai donc abandonné la culture verticale pour cette fois J'ai donc fusionné le bas de la tente pour avoir un espace de 90x60x90 Le ts1000 a été retiré pour laisser la place aux barres du FC-E 4800 Et bien sur gros LST pour gagner en surface et gagner 20 à 30cm de hauteur Vu qu’il y a 16 plantes mais que sur growdiaries on ne peut mettre que 8 variétés j'ai divisé en 2 diaries pour le bas de la tente 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 20% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.woodroom.tel/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.woodroom.tel/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 50% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.woodroom.tel/diaries/122080-grow-journal-by-soosan
Likes
Comments
Share
@Growshh
Follow
The top dress from last week is working nicely. Everyday watering with brix, green aminos, calmag and silica. 2 of the Blueberry Cherry are ultra blueberry phenos. 2 black patronus are very sherbsy but one is ultra sherbs
Likes
5
Share
@LedDave
Follow
Hi guys. Here is week 2 update, baklava seem to he really going for it 😍 hoping for big dense buds from this girl. On the other side the crystal runtz has still been quite sensitive to nutes and water Aswel as an ongoing problem I've had since day one with her leaves.
Likes
52
Share
@Stick
Follow
Well well well thanks to all of you for reading my diary and supporting that project 😎 This was the longest run I've been through for a while, but it was worth it. I was rewarded with 168g of top shelf quality buds, while she was under a 110W SMD (LM301B) board. Only 110W... I was amazed by these boards by InvisibleSunLed, and very happy of my investment. Samsung diodes are game-changers and it will get even better in a near future, what an exciting time for us modern growers! If you plan to buy some SMD boards, make sure the driver is dimmable, the light intensity can be so strong at its maximum, you could burn your plants (or your eyes). I started the board at 50% (~55W) and slowly increased the wattage as I was seeing a happy plant enjoying her indoor sun. I was also very surprised by the cheap IKEA bulbs, some ingeneers at IKEA must be growing pot, these tiny things do really work! I wouldn't try to flower anything with these, but it was perfect for the first weeks of my THC-Bomb. I made some canna-butter using the sugar leaves from the trim and some decarboxylated buds, and cooked a big cake. That s*** was strong as hell, I was unable to do anything for 24 hours 😭 If you're not used to edibles, start with small pieces rather than a big cake, I learned it the hard way 😜 I will now work on gaining knowledge about nutrient absorption in coco, improving my photo skills (must get a new camera..), and I will also look for a better way to produce timelapses. Shout-out to the brands who made this possible: 🇬🇧 Bomb Seeds (breeder) 🇬🇧 Invisible Sun Led (lights) 🇺🇸 Greenleaf Nutrients (nutrients) 🇬🇧 Air-Pot (pots) 🇸🇪 IKEA 😂 (lights) I enjoyed sharing this experience with you, stay tuned for some other grow report, and happy growing to all 👊
Likes
64
Share
April 10, day 21, the Euforia is starting to take off. Lots of branching that will need to be trained low and wide to fill up as much of the 6sqft space as possible. I turned on my second HLG 100 light to bring the lighting up to 200w. I did this to make sure as many of the new branches have light as possible, as some of the fan leaves have grown is very thick and the plant is quite stocky. I raised the distance of the lights as I don't want to overdo it with the second one running and the internodal spacing is already tight. I pushed up the EC slightly without any issue, so 1.4 is around where I will stay through veg. I also have allowed the PH to range lower as I am less concerned about cal mag issues at this point. Fertigations will continue to be 1x per day untill the roots spread more and the coco dries quicker. Then it will be up to 2x or 3x per day as needed. April 12, day 23, the Euforia is growing well, while remaining very tight and bushy. I did some minor LST tying two dominant side branches down to start opening up the plant, but will need a bit more height and growth before I can continue with more areas of the plant. April 13 day 24, lots of vigorous growth and the LST is working to expose more new growth to light for this very dense little plant. Increases fertigations back to twice daily, for 20 second watering intervals. The 26 seconds of watering was barely producing runoff now that the plant is larger, so this increased watering should help keep the coco well flushed even when the plant is significantly large. April 15, day 26, removed some leaves blocking nodes and lower growth that will never develop. I don't like removing leaves when I don't have to, but the plant is growing in thick enough there needs to be more room for growth around the center of the plant. Also performed some more LST and leaf tucking. April 16 day 27, LST widening the plant and opening up the center to new growth. Removed a few leaves as needed. The Euforia is growing well and I am hoping that by the end of the flowering stretch it will take up the majority of the tent. One topmost branch that was growing in thin after the FIM had to be removed while still fairly young. It's connection point seemed so thin it made the branch extremely fragile, and I decided I did not want the risk of it falling off after spending a lot of energy on bud production that could be spent elsewhere. When taken off I could confirm that it was around 1mm of the branch that was actually connected to the main stock, which just isn't enough. I will keep this in mind for the future in terms of FIMming vs topping. RIP lil' branchy.
Likes
47
Share
@S2340420
Follow
Another week closer due a bit of a heatwave this week according to the forecast temps. Were at 30 today humidity 55 will needty keep. Ma eye on tht
Processing
Likes
21
Share
63 days in, and she is starting to get really frosty. She is maxed on nutes. Still producing lots of white pistols. When I start seeing Amber Trichromes on the flower I am gonna start flushing. Happy farming out there Grow Diaries.
Likes
15
Share
@valiotoro
Follow
Hello everyone😎 Week 6 of flower for the LCC🍋🍒🍪 All the top buds harvested✂️ I had a lot of fun growing this strain🤩 The smell is absolutely out of this world…the colors…💜 I have 3 different pheno,all purple,some smells more citrus and the others more ripe cherries! One more week for the lower buds and finito I already feel nostalgic😜 *what’s coming out of the yuzu is essentials oil,every year I make Yuzucello feel free to ask me the recipe🍸🍋
Likes
39
Share
@J_diaz420
Follow
Realmente muy feliz con lo obtenido, 307g en 0.8me me parece genial, estas flores tienen un aroma genial entre el típico haze mezclado con cacao, un efecto muy agradable y confortable, rica al fumar y muy poco picante gracias al lavado de raíces con flawles finish 👌👨‍🌾🏻 Totalmente recomendable esta genética de royalqueenseeds muy agradecido por la oportunidad 👍👌👨‍🌾🏻
Likes
9
Share
@oregonian
Follow
Yellowsticky traps capture hundreds of thrips. She is just beginning to become a girrrrl.
Likes
16
Share
Esa familia , estamos otra vez y aquí actualizo la quinta semana de floración de las BlueBerry Cheese del banco de semillas ZambezaSeeds. Estas tienen buen color y el proceso de floración es el correcto su progreso es increíble. Ahora empezaré a aplicar el ExplotaCogollos de Agrobeta que es Brutal como compacta las flores , palabra. Que ganas ya de acabar estos proyectos y empezar con cosas serias. Os adelanto que lo próximo que que viene son Gelato y Lava Cake, y después Titán F1. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.
Likes
32
Share
@Vega0284
Follow
Hey Guys! Super excited this week! I've really been wanting to try growing outdoors, so I built a cheap hoop house! Got most of this stuff for the frame from Lowes under 300$. All the soil products I got from GrowGreenMI. Some really cool people out there. One thing I'm super worried about is drainage. Right now those holes are about 4 feet deep and they've got about 4 inches of water in them already. What's been cautioned is that, eventually, about 2 months in these plants roots will grow and reach the bottom and cause root rot to form. One of the biggest things I was trying to be wary of was causing root rot. This was also the biggest precautionary measure I took when mixing the soil. Adding the extra perlite, coco, and clay pebbles. Best advice right now is to build the soil up on the holes another 16 to 18 inches and possible stick a PVC pipe down to the lowest drainage point of the hole to allow some of that natural occurring water to evaporate. Any advice anyone has on it is welcomed! Making a compost tea for the soil outdoors, will probably put 2 cups in each RDWC bucket as well and let that do it's magic for a day or so before nutrient change. Raised the bed about 14 inches as well! All the seeds sank! Off to a good start! Lol
Likes
11
Share
@Kardo
Follow
Die trichome sind alle milchig ich warte noch 1 letze Woche und dann kommt die Ernte 😊👌🏻 Danke @skunkydog für die Unterstützung mit vielen Infos Mein erster Grow und ich bin bis jetzt zufrieden die Blüten sind richtig schön geworden
Likes
4
Share
@myketb
Follow
Week 1 Day 1 - Clones #1 and #2 are looking alright, not super strong and slight nutrient deficiency issues, but OK. Will just observe for now. - These clones are currently under a very mild CFL light (20 cm away and about 200 ppfd measured roughly by phone app - Tent Buddy.) - Clone #3 still need to be covered to maintain moisture. Yesterday I un-cupped the clone and it wilted a lot. This morning it looks better again after a night of rest under the plastic cup. - I've checked the run off and these clone's pH are so low, while TDS are so high (pH 5.7 and TDS 800pm). This evening, I flushed them with pH 6.5 water and brought the runoff to about pH 6.0 and 350 ppm) Week 1 Day 2 - Just foliage spray with mild CalMag this morning. Soil is still moist, so no watering. Week 1 Day 3 - Just minor watering today. Glad to see the clones are doing well as they are growing a bit everyday. Will transfer them to 3 gallon airpots with new soil mix soon. Week 1 Day 4 - Foliage spray with mild CalMag and Seaweed. Add 5ml of 250 ppm of balanced NPK nutrients AN B52 for each plant. Week 1 Day 5 - Foliage spray with mild CalMag and Seaweed. Transfer them to 3 gallon airpots. Week 1 Day 6 - Foliage spray with mild CalMag and Seaweed. Skip watering. The clones responded OK to the new airpots. Week 1 Day 7 - TBA