Week 12 (3-10 to 9-10) 3-10 Temperature: 27.5 degrees (lights on) 20 degrees (lights off) Humidity: 86% (highest) 60% (lowest) Watering: 1200 ml. PH 6.4 EC: 1.8 (with Hybrids & PK+) 4-10 Temperature: 27.3 degrees (lights on) 19.8 degrees (lights off) Humidity: 72% (highest) 55% (lowest) Watering: None. 5-10 Temperature: 25.8 degrees (lights on) 19.5 degrees (lights off) Humidity: 80% (highest) 82% (lowest) Watering: 700 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) Last night i accidentally let the light at 20% strength, so the whole day the light was on the lowest wattage. 6-10 Temperature: 28.6 degrees (lights on) 21.1 degrees (lights off) Humidity: 81% (highest) 56% (lowest) Watering: 1000 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 7-10 Watering: None. 8-10 Temperature: 27.4 degrees (lights on) 18.4 degrees (lights off) Humidity: 85% (highest) 53% (lowest) Watering: 1300 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 9-10 Temperature: 27.9 degrees (lights on) 19.4 degrees (lights off) Humidity: 80% (highest) 52% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+)

Today marks the 7th week of flowering for my cannabis plant, and it's truly fascinating to observe the changes that are taking place. The stretching phase has officially come to an end, and now the plant is fully focused on developing its buds. I can see that the buds are starting to swell and gain size, which is a promising sign of a healthy flowering process. I've adjusted the feeding schedule with BioBizz products to match the plant's current needs. Overall, the plant looks healthy and vigorous. The pistils are turning a beautiful shade, and the resin production is beginning to increase. I’m excited to see how the buds will continue to develop over the next few weeks. I’ll keep monitoring closely and make sure everything stays on track. Be excited for the coming weeks 💚🌱🌱

The ladies light schedule was changed to 12/12 on Oct.30!❤️ The girls were doing great about 1 week after their big defoliation and SCROG being put in, I decided to flip to flower. I had been tucking and bending and had achieved about 80-90% canopy coverage, the last bit should fill in this week as they begin to stretch. During the 1st week of flower transition, I continued to tuck and bend where I could, trying to maintain an even canopy of tops, as well as fill in as many of the squares, as evenly as I can. It becomes a morning and night routine, I check on my humidifier, say good morning, and tuck away for about 5 minutes or so, it doesn’t take much at this point. Once the first week of stretch is through, I stop tucking branches and allow the tops to continue to grow upwards. I find that by using a SCROG method, there isn’t really a whole lot to do…I don’t defoliate until week 3, so it’s just feeding every 3-4 days and filling my humidifier! When I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️

Just amazing 😉Flushing time! beautiful strain Fast buds! The smell its something magic!! Wtf! Look at the photos and see what is a good auto strain! On my top!! I can wait to harvesT and taste it!! I love og Kush!!

All and all I popped 19 seeds lost one after it came above ground 5 of those I will be posting on here which are mandarin cookie crossed with zweet og they are regular photoperiod plants so I will have to sex them it is a small pheno hunt looking for something to keep as a mother plant didn’t use any nutes for the first week

amended so there is enough for the plant to finish flowering. After the 3rd week they are really perking up and getting that fat structure on the buds. Starting to smell very danky. Can't wait to taste this one under these new grow conditions.

Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.

Day 1 All five Gelato seeds floated on the top of the cup of spring water. Seeds set in room temperature spring water at 4:00pm. Day 3 5 of 5 seeds have a 3/4" tail and have been transfered to the RDWC in rockwool with a top feed sitting just under the cube. PH 5.8 50PPM RO Water, 1/8th dose of week 1 Future Harvest nutes - Micro, Grow, Bloom, Calnesium, Plantacillin, Prop-O-Gator, Super B+. Day 4 PH 6.2 50PPM Day 6 PH 6.3 PPM 150 Fed 1/8th strength of Holland Secret 3 part, Micro, Grow and Bloom, calnesium, Plantacillin, SuperB+. Future Harvest Ph'ed down to 5.8 to give full range of nute intake Day 7 PH 6.0 150ppm

I removed some more leaves. I checked today the trichomes (Thursday) and it is tricky. It looks unmatured, but some already amber. I wanna give 2 weeks more to be sure, it is the 8th week of flowering. Everything remain the same, watering 2 x 200ml a day. Only pure water because it is being flushed. Very nice plant !❤️🤪 There is a lot of flower on it and the plant is bent because of that. It also has very strong smell and if I touch, it makes my fingers very sticky.👌 End of the week Purple Punch is 43 cm.

Really good genetics.A sativa strain that can handle so much cold enviroment and produce so many flowers in 6L pot!😃😁😌

It's Day O2 For my 2 Kombucha Cream and Day 1 for my Snow White and SpliffStrawberry

We're rolling into week 22, the 9th week of flower for these wonderful girls. Possibly the last week they'll have, at least the last week UKBS 1 may have. They've both shown great progress in terms of growth in the past week in my opinion, and the trichomes are beginning to present as cloudy with a smattering of amber. I like my CBN, so I prefer to let them amber slightly more than most. Rest assured I'll be keeping a close eye on trichome color in this next week or two. Timelapse is out for the week. Updates come as the week progresses, as usual. EOS T5 shots are out. -7/4/2021 - A cola on Carl 1 was too heavy for it's own good, and snapped. I decided to remove and dry it as I really don't see a point in trying to re-attach it at this point in flower. -7/6/2021 - Another cola snapped on Carl 1. Unfortunate, I was hoping she'd fatten up further first. Ah well.

This is the 8th week. Thursday will be 9 weeks of 12/12. Some trichs are amber. They just added a good bunch of girth over the past few days, but most of the pistils are red now. The rest of them have been dropping leaves consistenly but the canopy remains full so they must be putting out more leaves. I just flushed to 80% runoff and found out that I had 1200ppm. I just got an ec meter but my last reading said closer to 600 so idk what happened there. I flushed until I had runoff ppm of about 150. Now they're back in the grow tent. I don't want to keep assaulting them with my microscope. I think they're ready. Just gonna let them settle another day or two to dry out a bit. I took one small branch off the small Wedding Cake plant on Thursday and I've just been watching it dry on my counter. It's been 5 days and the stem snaps but still leaves a fiber connecting. I put it into a small jar with a 64RH thing. I just want to try it. It already smells amazing. The leaves on the big CBD Blue Shark plant are going really yellow and some other colours are starting to come out as well. The buds all fattened up and got more frosty again. I was worried they were foxtailing but they got more calyxes underneath the peaks and have been making more of a pyramid shape. They're really close to peak. Harvest day will be March 17 or 18. March 17 1023pm chopped and hung after lights off all day. RH was 65% before I chopped and 50% after I closed the window and cut the plants off the saturated pots. I did a wet trim to prevent mold. The buds are sticky af. Gonna hang them to dry for 7-9 days before curing in jars :) March 18 : checked the RH when I woke up and it's chilling at 45% 😎 March 19 : just checked to see how they were drying. There are seeds in every plant. RIP I'll update when I put them in jars and again a few weeks later for final review. Overall it was a good grow despite the rocky start and a good introduction to the mainline technique and my new grow space. Next grow I should have everything pretty well dialed in. March 23 They were hanging for 3 days. Rh was around 45, then spiked to 65 overnight when I forgot to turn the fans back on. Temp was high at around 26.they felt wet after 2 days, and bone dry after 4 days. The stems still didn't snap but I put them in jars anyway. A day later, jar RH was 50%. I burped all the jars and there was a smell from the new jars. I took all the weed out, washed out the jars, and did a dry trim on the weed. One of the Wedding Cake plants must have gone hermie. I didn't see any bananas and didn't even realize there were seeds until the very end. The seed pods looked just like calyxes while the plants were growing. Many of the nugs are unusable. Under the sugar leaves are just layers and layers of seeds. Some weren't hit that badly. The CBD Blue Shark is much better off but still has some seeds. I'm trying to stay positive. It's a bit of a shock though. I'm anxious to try the finished product. If the flowers at least taste good and have a good effect, all is not lost.

Can't believe we're at the start week 5 already. This is such a beautiful process. Things are looking good - I started defoliation on all the ants this week. I figure, the little one isn't getting much bigger, the big one is so bushy the light is having trouble getting thru even with LST, and the bag seed seems to be a photoperiod plant so I have all the veg time I need to recover on that one. Update: The bigger girl started flowering on day 32! Let me know what y'all think!

Day68 HARVEST DAY big buds

Looking good so far

12.12 Ok finaly girls got their move to 16L root pouches and straight inside the tent. I mixed them nice "soil" with 50L all mix 15L worm castings and 40L of coco coir. I mixed those and gave a good first watering with BiiRhizo, Root Juice, alg a-mic, acti vera, grow, tarantula and voodoo juice. Then I placed netting. I'm gonna use it trellis style not bending much. Planning to keep as short veg as possible, so as soon as I'm happy with their size I'll flip to 12/12. Less than a week I think. Second watering I gave "pre flower" nutes which are listed above. I'll go with those without Nirvana and carbo load untill I'll flip to flower. I use these bottles of advenced nutrients that I have but I won't be buying more I think. Exept NIrvana, Tarantula and Voodoo Juice. They look little droopy maybe because little getting used to new homes but they good now already. Also 600w HID coming to replace 26w LED is kinda shocking at first. But yeah seems like awesome genetics, fat healthy leafs and same goes to stems. 💪 Ok coming back at ya next week, maybe I have flipped when we'll back..hope I wont flip too much 😜😅😝👺👌 HAHappy growing! 👽

Okay growmies here we are at the end of our PURPLE LEMONADE by FAST BUDS. It was such a pleasure to grow, i learned so so so much this run that will help me through the rest of my adventures. The beginning was tough as i am new i over watered and did not ph the water and what i mistake. But its okay i learned. She bounced back like nothing and produced these HUGE, THICK, DENSE BUDS!i remember the panic i had week 2-3 and wanted to scrap all of this and start over.... thank the weed gods i didnt because look at this masterpiece. I always said in the passed weeks comments i hope my ugly duckling becomes a beautiful queen. And here she is. She was SOOO HUNGRY AND THIRSTY! Over 5L a day guys..... and not a SINGLE drop would come out of the bottom.... over a all a pleasure and amazing grow. I will for sure grow again and again. I would love to Try this out door or in a 10L pot can probably get this beast to be the size of a 5x5 easily! She responded so well to LST and topping... slowed it down but it was so worth it guys lmao.... like honestly OVER HALF A POUND!!!!!! GROWMIES! I LOVE LOVE LOVE YOU ALL SO SO MUCH! Thank you for all the continued support and likes and comments and help. Id be no where with this with out all of you. And thank you to the FAST BUDS team and to you heather! Grow diaries thank you for the plat form. I love you guys. All of you. All my sponsors. Thank you. Until Next time growmies! Stay positive, stay safe, stay high.

We are nearing the end of this grow and so far everything is taking shape very nicely. I did a quick 2 day flush with some florakleen from GHE and then got back to the bloom nutrients. I did this just to clean the roots a little and get rid of any unwanted salt build up. This will hopefully set us up for a strong finish. Really impressed with the marshydro fc3000 thus far. For next week i will push the EC levels quite a bit, remove any unwanted popcorn nugs and try set it up for a strong finish.