Defoliated, trimmed and up sized pots

Plant is looking good and healthy, starting to develop good roots rapidly and is now fully in the veg stage, Rhizotonic is working great as far as I can see and Canna start looks the job, I have Canna A&B for later but after studying reviews etc Ice gone for Canna start for the first 3 weeks and then on to the A&B later as it comes into flower, Plant has grown 4 inches or more the last few days and is now 8-9 inch tall with nice lush green leaves, I'm increasing nutes and supplements and have introduced calmag at a 1/7 recommended dosage I don't want to stress the plant at this early stage, I've decreased the reservoir level since last week to about 1.5 inches under the net cup as the roots and hairs are developing well and want to give them some air as they grow further into the reservoir Pump on 24/7 Ph in reservoir is slightly decreased to 6.0-6.1 PPM around 250-300 will increase next week

_____ Week 12 | Day 85 - 91 | 5th week of Flower ______ Day 79🌞 oh yes... the smell when I open the tent becomes more and more intense. The buds also look more and more frosty... I think the extra side light pays off, where normally there is little or no light, the buds look just as frosty as the top colas. I hope you can see that well in the pictures... unfortunately I don't have much space to take good pictures of the pages... Only LPH 2 & 3 can be seen well from the front. Amnesia Haze: Amnesia, as expected, is much slower in development than LPH and Biscotti. Number 1 looks a bit wilder and scruffy than 2 and 3. Also from the development 2 and 3 are further and form already diligent trichomes Biscotti: both biscottis look identical, same pheno I think. development is very good and already looks very frosty Lemon Power Haze: LPH 2 & 3 look identical, with number 3 looking frostier and furthest along in terms of development. LPH number 1 looks totally different, the buds look quite small, and it also looks different. I have to think about something for watering. I love my plants but watering 8 pieces in such a small space is no fun hehe. At the moment I water them manually via a small water pump, the whole thing is very fast but I still have to dislocate myself every time to get to the back plants. this is not the yellow from the egg :D For the next grow, the plants have to be higher and I'm thinking of an automatic water supply. Actually, watering my plants calms me down when I do it with the watering can, but under different conditions...Possibly also fewer plants but more training. When the tent is empty again, I start to implement my plans. I'm also thinking about growing 1 or 2 plants in a DWC system. Whether I make something myself or buy something ready-made is not yet clear. If you have any tips, feel free to write to me. Day 81 🌞💧 - Today was feeding time again, as announced again after the 3rd day. I mixed a little more than 25 liters and provided each plant with ~3 liters Day 84 🌞💧 - Three days are over again and the plants are hungry again. 3 liter each Plant, small drain. ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 22,1° Hum. avg. - 56,3 % RLH

Same old, same old.. despite the hot weather and my messiness, i think we are in a slow but good way.. Added 1ml of bio bloom, same schedule.

Dried for 7 days at 25ºC 65% RH

Plant doing great after topping.

Week 3: Mid-Flowering Stage Welcome to the seventh weekly update of our cannabis cultivation journey in Germany! As we progress into the third week of flowering, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—are flourishing with vibrant buds and continued growth. Key Developments: 1. Bud Development: - The buds have significantly increased in size and density, filling out along the branches. - Trichome production is becoming more pronounced, indicating the onset of resin production. 2. Environmental Management: - Maintained stable environmental conditions with temperatures ranging between 20-26 degrees Celsius and humidity levels around 40-50%. - Ensured adequate ventilation to prevent humidity buildup and maintain airflow around the plants. 3. Nutrient and Watering Regimen: - Continued to provide a balanced nutrient solution through the AutoPot system, adjusting as needed based on the plants’ flowering stage. - Monitored soil moisture levels closely to prevent overwatering or underwatering, ensuring the roots receive optimal hydration. 4. Support and Maintenance: - Supported the plants’ structure with additional ties and stakes to prevent bending or breaking under the weight of developing buds. - Continued to prune away any yellowing or dead leaves to maintain plant health and focus energy on bud production. Growing Medium and Setup: - The plants thrive in a blend of living soil, coco coir, perlite, and clay pebbles, enriched with mycorrhizal fungi cultures for enhanced nutrient uptake. Next Steps: - Monitor the development of buds and trichomes daily to determine optimal harvest time. - Adjust feeding and watering schedules based on plant responses and environmental conditions. - Prepare for the final stages of flowering, focusing on maximizing bud growth and resin production. Stay tuned for next week’s update, where we’ll discuss the late flowering stage and preparations for harvest. Feel free to ask any questions or share your experiences in the comments below!

So I was really happy to have the opportunity to grow this strain I have my clones are ready My next grow will be sour headband and GDP they are all in veg

Mar 10th Week 13 CDP # 2 is doing awesome Some LST required and possibly some more defoliation this week CDP # 1 is picking up a little bit from last week but still far behind it’s sister plant Mar 13th Fresh nutrients today More defoliation CDP # 1 is still lagging behind CDP # 2 is healthy happy filling out nicely It is the biggest plant in the tent Mar 14th Defoliated CDP # 2 big time. Took me an hour or so. This is an experiment with defoliation for me. I want to see if this will help provide the stimulus to produce buds instead of leaves. All in an attempt to get the biggest nuggets I can.

~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/1- Well here we go again fam! This one's going to be super fun with one of my favorite autoflower strains from Seedsman Seeds, growing in a little 2qt. popcorn pot and entered in the 'Best Rarest & Smallest Pot by Seedsman' contest, this one's gonna be a champ! 🤩 Today I went ahead and planted a seed directly into the medium which was pre-moistened with tap water from my well. After I placed the seed about 4-5mm deep, I gently covered it with medium and poured approx. 1oz of water on it. I'll keep the pot in the tent with a Solo cup over it to retain the moisture until it sprouts... Fingers crossed! 🤞🤞 11/3- When I checked on the Zkittlez this evening I was elated to see that it had broken ground sticking up about 4-5mm from the medium! I removed the red Solo cup from her and replaced it with a clear cup that has ventilation holes in it and which I misted the inside of with water to ensure adequate humidity for the seedling. 11/4- This morning I checked on her and she's already up to about 18mm tall but has not shed her shell yet. I'll make sure that the medium stays just moist for now until she's a little older. By late in the evening she had shed her shell and her cotyledon's began opening. I noticed, after taking a close look at her, that her first tiny set of leaves were brownish looking with light colored tips. I immediately thought back to when I was pee-moistening her medium and had a 'high moment' using my other plants nutrient solution which was around 800ppm in her pot instead of the straight well water I usually use. I thought that she was getting nutrient burn causing the funky color of her first leaf set but fortunately by the end of the 20 hour light cycle, she had her first leaf set out and the were a healthy green! 11/7- Well gromies this girl has a week behind her now and I'm elated to say that she's healthy and doing marvelously! Up until now all I've done is make sure that her medium didn't dry out using straight well water ph'd to 6.1 @ 75℉. Today I went ahead and watered/fed her with 0.6L of well water with Dutch Pro Grow 'A' & 'B' added @ 10ml/g, Dutch Pro Multi Total @ 7.6ml/g, Dutch Pro Take Root @ 3.8ml/g, Dutch Pro Silica Von Liebig Special @ 1.2ml/g and Earth Juice Oily Can @ 5ml/g which was then ph'd to 6.0 @ 74℉. The Seedsman Zkittlez Auto is doing great and now is at 2 inches tall with good color. Here we go into her second week since breaking ground and the beginning of a beautiful Seedsman cultivar....follow me! 😎👍❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! May all your days and grows be Blessed! 😎🙏💚

This week is going pretty good too! the bugs seem to be swelling up a little more and getting a little more sugary. I added in a video of another one of my purple punch plants (the one with he purple nugs growing)

Next week harvest!!!

This week the weather has been nice and consistent. Today has been the hottest on record in the UK reaching 37 degrees. This girl has loved it. She has bounced back nicely from her topping making the way for more bud production. fingers crossed this weather continues. 🤞

Veg Week 7 Day 49 to 55 - 4/8 to 4/14 This week is primarily test training recovery and stretch setting for flower. Follow-up on the breaks confirms the last statement: So as I said, little to no damage will produce average branches (prone to weight breaks later in flower as discovered in my first grow) Small to slightly moderate break of green and evenly crushed stem can create heavy knuckles with large waterways through hardwood. This provides great support without hindering growth and actually seems to encourage it. Moderate to heavy rips with no back support will runt growth and support; if not die off from lack of attention to the issue. However if back supported immediately, it can recover with a little extra time but lost days of growth will be replaced with recovery days instead. Feed this week was again an auto pot reservoir feed at 500ppm total before add-ins. I used 400ppm Veg concentrate mix (recipe week 2) and introduced 100ppm Bloom concentrate mix (recipe week 5). I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 5.9 Video HST Branch crushing and bending to train waterways for stretch in flower. The more I do here, the less I have to do later. Next week I plan to monitor the training of the branches and feed 500ppm at 5.8ph. All I am trying to do now is set the growth of the colas/branches to where I want them to flower and stretch from now that I can see which are going to be more productive in size.

The flush begins , Using final flush with water at 21.oC And some defoliating to get light down . Managing to keep temps stable at 23-25 oC with both lights Also added in a mars hydro light Last week and seems to be working well and shown good response from the plants under it

i was away for a week and i strongly suggest everyone to use blumats... its a life changer.