Day 10F-17F (Day 10F) Everything is looking on point. I’m going to soak in a gallon of lite compost tea diluted to 400ppms on each plant except for #5. I’m still a little worried I won’t make it through the stretch but at the same time I fear N toxicity just as much. I will give one more lite tea before the end of stretch, most likely at the end of this week. (Day 12F) Ladies responded nicely to the tea except for BBB#1. It just isn’t looking as vigorous as it was last week. It’s the only one without an air hose so I guess it couldn’t hurt to grab one. The air hose does without a doubt prevent overwatering in soil and I’m surprised I don’t see more people using it. It’s cheap, effective and gives me similar results to growing in pure coco. I’m going to give one more light foliar spray of 3ml of calmag, 3ml of kelp and 2.5ml of insect frass. (Day 14) Got the air hose hooked up to all 5 plants now. I hate that I’ve been forced to defoliate so much in early flower and it is definitely reducing bud size. Last round my bbb’s had pistil clumps twice the size at this time and they were dealing with severe deficiencies. I’m hoping it’s just genetics or the fact they are larger plants. (Day 15) I’m starting to see signs of N toxicity on the some of the new growth and overall growth on all plants except #1 has slowed. It was most likely caused by the foliar spray/tea combo. No more feeding anything for the next 12 days at least. Luckily it’s still pretty early in flower but I know that N tox can hit really hard after the stretch stops. I would be pretty upset if I vegged for 80 days only to get severe N tox in mid flower. Since it’s not breaking down in the soil, I should be fine. I’m going to defoliate some more of the large bottom fan leaves as they hold large reserves of extra nutes I don’t need. Hopefully these small defoliations aren’t stressing them at all. Next round I plan to do a big strip one week before flower, at transplant and a second big strip on day 21. (Day 17) I think I was over-worrying about the seriousness of the N tox. I’ve seen it hit very hard in mid flower and can’t be too careful. It’s almost always caused by water soluble nitrogen so I’ll try to stay away from that unless I absolutely need it. My case does not look to alarming just yet. I noticed the stunting on #3 right after that last tea so I am going to stop giving the last liter of compost tea because of how unbalanced and separated at the bottom it is. It sure helped out the other 4 plants that didn’t get the granulars from the bottom of the bucket. I‘m planning to give a bloom tea around day 26 and a final top dress a few days later. #1 has now out stretched everything else in the tent. I honestly was not expecting that. If #3 didn’t get stunted this whole week I think it would be the taller/heavier plant.

Piante spettacolari, attraenti , la resina abbonda e l’odore è forte e molto buono Tra poche ore si raccoglie , radici pulite con risciacquo di 2 settimane 😋😜

Its grown so fast and is putting on flower

I'm very sorry. Everybody had a big move. This past couple weeks, everything settled in one of the plants did not make it unfortunately. This is the sour jealousy 2 weeks into flowering. Change the dose on the blue nutrient, up to fifteen milliliters per gallon, while dropping grow nutrients. Roots have more than filled the bucket and its space growing very well had a small p. H deficiency and stress from the move. Plant is recovering healthy.

Buds are getting swollen, smells somewhat like pine trees.

Day 111. First is ready, second week behind, third maybe even 3 weeks behind .... Plus they are LEAFY ,!!!! Trim jail ... Wet trim for all of them - no doubts !!! Day 115. Still hanging, slowly drying and result should be decent at the end ... A week more I guess, very humid in UK ... Day 118. First trimmed - 175 g. Other is chopped ! One still grows ... Day 136. Chop day for the last one !!! Long run .... Happy Growing !!!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Started soaking purple lemonade autoflower from fast buds on 5/17 Placed in damp paper towel with some great white for 2 days till taproot got decent size then planted into coco She popped up in coco 2 days later on 5/23 an has been doing good She's growing good comming up ending week 1 of seedling stage Begining week 2 of seedling the Purple Lemonade is doing good she sprouted missing a leaf in one side but grew the next set perfect so hoping she keeps on the good path

07/23/24. Going into week 4 flower After last update, the things I mentioned worsened. The yellowing turned pasty and almost whitish. The leaves feel weird.. like thick and not rubbery.. but kinda. Don’t know how to describe it. I had stopped feeding her, other than calmag with micros, one of which is iron. I had also backed the light off since she also appeared burned on the buds or something. Wasn’t noticing much improvement so I checked runoff and it was very acidic. I then over a few hours time gave her large amounts of water until it got more clear when it came out. After that I finished off with just the calmag/iron. A few hours later her leaves were perked up. They still looked bad obviously not going to change that fast. Jumping to today, parts of the leaves look to be regaining some green, especially in the veins and in toward the bases, which is where the most white/yellow was. The buds are starting to grow again, but still appear burnt and lacking hairs. With the green returning..if you look now the symptoms would say nutrient burn. I’m not an expert, but I’m unaware of nutrient burn turning a plant white and yellow and being able to regain green after? If I’m wrong on that please let me know. For now I am going to just keep going on with water silica and calmag OAC as it seems to be at least doing something that looks right. I also feel the lights way too dimmed (50% 22in) and high, but not taking chances. I’d rather have the plant healthy vs killing her for bud size. Hopefully too much damage hasn’t been done and my once beautiful Pablita will once again be. 😿 Update: 07/26/24 More whiteness/pasty has decreased and a few little hairs have sprouted! This seems like progress. As green gradually reappears on top.. it’s disappearing in other spots.

Last week of smart proteins she got it once maybe twice by now, had a tough week not gonna lie the travails of the grower what are you gonna do 😅 drinking a bit, no nutrients yet, she might get a pk boost who the tf knows 😎 dropped her lights to 10/14 to induce resin production now these absolutely reak lol can't quite put my finger on it , sometimes it's really sweet citrus sometimes it's dankier 🚀

April, 5th I think San Fernando Valley stopped Streching she can concentrate no in developing the Buds😆 It is getting quite full in the Tent, the Plants growing with alot of Plantmaterial Iam watering Dailly with beneficals, and feeding every other Day, until now with the Vegetation Fertilisers, but from tomorrow on they get Bloom fertilisers The silica Todressing worked wonderful, i could strenghthen the connective Tissue Iam quite happy with this Gentics, they were vigor Growers Hoping for delicious Buds😜

4th week of flowering is beginning today I’m very happy with these, began to add K to the feeding so they can grow big buds I hope 🤞🏼 Light smell increase, gassy/resin notes + piny and lemony too ⛽️🌲🍋

Hello. This is the end of week 6 and the beginning of week 7 of flowering. It's been hot here this week. Over 30* c for the last 5 days in the green house. I was busy with my Panty Punch harvest and didn't check them through the day. When I closed up for the night 2 days ago, I found them all wilted from lack of water. But they all have more yellow leaves because of that. They are also pulling nutrients from the big fanleaves getting near the end of flowering. After pollenating the clones (see the short video) I cut down the Panty Punch male so as not to seed anyone else's cannabis plants, But it's the beginning of July and there shouldn't be any cannabis plants that are flowering outside just yet. I forgot to take pictures of the 3 inside plants this week. I think one might have gone hermy on me. I'm seeing a lot of brown pistils on the plants that should be white. I took a quick look but didn't see any male flowers. Will have to look closer later. No sign of problems. Still a month to go before harvest. Things are going good. Ok. Have fun out there. Chuck.

very well, fragrant and resinous buds, it doesn't miss much anymore. I use co2 tablets on the hottest days. Very happy and satisfied 👽😎

been such a great week, temps perfect, humidity is low enough (could be lower) but is what it is! i am going to start flush next week for my girls that are ready! I've introduced calmag at this stage too as they all needed it! i stay with advice given and defoliate as i go as these colas are supersizing and frosting, i have introduced calmag as she needed it and will continue for a week and see where shes at until finish so i can plan more accurately for harvest. ill say shell go the whole 10wks bloom hope you enjoy the video...... but i know you will :} confident

All ladies have grown a lot this week again, with the Blue Dream CBD growing at the rate of about 10 inches a week. That's almost a foot and I will admit to being a bit unprepared for this kind of growth rate, especially given that flowering season will not start until about late July... All said everyone seems healthy and happy. UPDATE - Interesting and unexpected development: the ladies (both Trainwrecks) seem to have flipped into flowering. I have no idea how this happened at this time of year. The seeds were not planted under lights, the plants have been sunlight only since they sprouted. Perhaps this explains the crazy growth all plants have been exhibiting. I'm keeping a close eye out on the two others to see if the same happens. Any thoughts?

This one is a wrap… Hang Dry for as long as possible and well be testing later 🚀🚀🚀 GHL

Here we go 😎

2/11/24 - Day 96 - Water change day!!! Everything is still going great. I'm just waiting on her to tell me what to do. Her leaves are just now starting to lighten up just a tad. The Trichomes are still a mix bag but mostly clear, with less then half cloudy and maybe 1% amber, maybe. So there is still some time. Keep in mind im going to flush her with just water for about a week. So whatever week i choose to start that there will be atleast one week left. 2/12/24 - Day 97 - She's FINALLY showing signs of the end! The leafs are starting to turn a light green. Soon a lot of the leaves will start to turn yellow. I'll check the Trichomes one more time and then we will start the flush. 2/14/24 - Day 100 - We are getting close, today is day 100 of the life cycle. In a week or two she will be coming down!