Likes
Comments
Share
And here we are at the harvest of our second Jet Fuel, a beauty with a jaunty look, flowers with large calyxes, gassy smell is Jet Fuel by Zamnesia. ** Remember that for all the strains we have at least two plants, one left to grow straight and one worked with the techniques. This is the plant left to grow without the use of techniques to see the other go to the previous week. The trichomes said cut me: it is a sativa predominance of leather we want to preserve the energizing effect. So guys not too much amber on the sativas I recommend otherwise you transform them into indicas. I see enough at least for my tastes and with respect to the strain, always evaluate not only based on your tastes based on the strain. Don't let the amber rule influence you too much we like to talk about harvest window and therefore we have mostly milky / coudy, some transparent and a good amount of amber as well. Technique used // This plant was left to grow free and beautiful with some cleaning at the bottom and some leaves but at the right time. Better with techniques or normal? This time we have two phenotypes similar in appearance and different in terpene profile, the plant left to grow straight seems to be a little better but they are really very similar. Flower quality // From one to 10 stars 9. The plant has resined very well on all sides, it is quite mature, I am satisfied with the color and I harvest it. Buds washed and cleaned as Lukas explains very well on the Zamnesia website, go and read and study the topics in depth, often it is necessary not to act superficially guys! Check the article in your language // https://www.zamnesia.io/it/guida-growing-cannabis/333-lavaggio-delle-ceme Fertilizers // I am very happy with how I managed to unload the plant that at a certain point before going to flush was fed for a few days only with additives and then went to flush and we are very very well discolored, I predict a very tasty flower, grown organic and flushed successfully, the flavor and taste will be epic. All the fertilizers and additives of Plagron in the green / 100% organic version have fully satisfied me. Choose your soil based on your style and calculate the sheet on the website www.plagron.com - Brother if you are stubborn use additives listen every now and then....and then come and tell me. Fertilizers on the other hand are found in convenient all-inclusive packages on the Zamnesia website. Great strain, I found a citrus/sour pheno and a very gassy one ---- https://www.zamnesia.io/en/11258-zamnesia-jet-fuel-semi.html Zamnesia Description // Jet Fuel (also known as G6, Jet Fuel OG and G6 Kush) is a modern hybrid rich in THC and terpenes with a diesel aroma. Originally created in Colorado by crossing Diesel with Aspen OG, this 60% sativa-dominant hybrid is a must-have for any smoker who enjoys an uplifting and energizing high. Now, thanks to the hard work of our breeders, the original Jet Fuel is even easier to grow at home. Order your seeds, plant them in soil and enjoy their rapid growth. After just 9-10 weeks of flowering, you can expect a generous harvest of top-shelf sativa buds! Jet Fuel produces large buds that contain high levels of terpenes and up to 22% THC. True to its name, Jet Fuel has a pungent diesel aroma, with similar flavors. Trained noses and palates will also detect hints of earth, citrus, and pine. Thanks to its potent THC content, Jet Fuel can deliver a very powerful effect after just one hit, making it perfect for social settings, creativity, and daytime use. After an initial burst of energy that increases focus, Jet Fuel's effects tend to settle, leaving users in a dreamy, positive state. Music and Frequencies // For about 4-6 hours a day, my plants listen to 432Hz frequencies that are specifically designed for their well-being, and sometimes a bit of black music to give them that buzz that only music can provide. www.radionula.com All the best that mother nature has to offer is at ---- www.zamnesia.com
Likes
10
Share
Well I'm a bit upset last week I ended up dropping my ph meter in a tank of nutes I was mixing and by the time I got it out the meter was junk. I was planning on flushing the crystal but had to wait another week for the meter. I suppose the good thing to take from this was I found out why I was having issues with my plants. When the new ph meter came in I went to check my run off and my nutes that I had all ready mixed up. It turns out that my meter i had been using this whole grow was off by about -2-2.5 so this whole time I had been feeding the plants at around 3ph smfh. I cant believe they look how they do knowing what went on this whole time. Fastbuds crystal meth is 3days into flush and i will be cutting it down this weekend most likely. Mephisto hubbabubbasmelloscope is smelling like sweet sweet candy and is thick in resin Bighead seeds freeze berry/ blueberry crumble has a dank pungent stank to it and also is frosty but larrfy Big bomb is still growing thick and have bud sites everywhere Now I'm ready for the next batch and ready to get dialed in!
Likes
2
Share
Likes
28
Share
@No_Clout
Follow
Started flush this week giving them four litres of ph’ed water everyday until the end of week ten, some leaves have started to yellow but hopefully that changes by then end of week ten, this plant it extremely frosty and looks really dense really happy with these two. It stinks of berries, I’m not sure if I can smell grape but theirs a pungent berry smell whenever I have them out the tent.
Processing
Likes
20
Share
12/31: They are both coming along nicely.👍 Today was the first day in which I fed them some Big Bloom and Boomerang along with humic acid, pH'd to 6.1. 1/3: I've been letting them dry out a bit for the last two days. They've got roots coming out the bottoms now...I'll probably transplant them into 5 gallon fabric pots tomorrow or the next day. I ordered a 4' 180w tube light with 578 LEDs..it has a 360 degree beam with 3000k and a bunch of 660nm. It's waterproof, so no worries about keeping it beneath my canopy to illuminate the lower branches and hopefully increase the density of those buds that never get much top-lighting. Today, I mounted my two new 24w UVA LED lights (395-405nm) to my frame. I'll run them 6 hours a day from the time I put the plants into my closet, until harvest. It is my understanding that exposure to UVA, particularly during the vegetative stage, triggers many different plant defense hormones, which speed growth and can increase heartiness to withstand constant exposure to UVB without suffering as much cellular damage as usual. I'm also ordering a 2' Solacure FlowerPower UVB (285nm-310nm) next week to use during flowering to stress the plants and increase trichome production. 1/4: I did a few foliar feedings with big bloom and fulvic acid today. 1/5: Transplanting day. I dusted their roots with magic dust and transplanted them into 5 gallon pots today. I had some excellent compost with biochar and myco that I mixed into their soil, too. I watered them in with about 2 quarts of their first taste of full strength veg nutes, plus mycorrhizal fungi, trichoderma, beneficial bacteria, and humic acid, then I sprayed them with biotabs boomboom spray when finished. The were moved into the closet under the quantum boards, UVA's, and a pair of MiracleLED blue bulbs. I'll start adding far-red spectra to the equation in the next few days.
Likes
30
Share
@Dunk_Junk
Follow
Day 104 - Final harvest taken place after I noticed a sprinkling of amber trichomes over most of her flowers. I will update this diary in a week or so with dry weights. I did not bother to weigh it wet. Upper buds seem nice and dense.
Likes
6
Share
@Skunkstar
Follow
Flipped the girls fed ec 1.5 runoff was 1.7 coco drying back to half the weight of pot every feeding and started with the shogun boost hung the gavita 1000w se pro about 3 ft high and added another fan to the mix ph is around 6.2 on runoff im using a wet vac to clear all the runoff temps are around 26 day 22 night im looking to keep night time temps closer within 10 degree's diffrence for tighter intonode space there on a stretch looking to do some defolation usually I like to right before the flip and day 21 but I'm going for week after flip and end of week 3
Likes
Comments
Share
Organic nutrients, correction ph to 6
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
84
Share
I trained her pretty much in the last week with LST. I also constantly trim her leafs and cut off fan-leafes to improve the airflow and to let the lower branches get more light. Update 18.04.2024: Yesterday I cut off a few fan-leafes. I want to improve the airflow and I hope that the plant got more energy for growing branches because of that (I thought it would might work like lollipopping). I also turned the pot because one twig is significantly smaller than the others and I want even branches.
Likes
41
Share
Here's a look at the Alien OG at the end of Week 6 of Flower, I have uploaded a video for you fellow growers with some Bud Porn and a better look at how the ladies are doing 👍🏾
Likes
7
Share
@Drtomb
Follow
These are the replacement crew for the left hand side of my tent. They have been growing for around 1-2 weeks in 1 gal pots and then 1 month in the final 4gal. They are currently running on veg nutes for the first week or 2 of the flip, then they will join the other side with a 1000pm flower version of the Mega Crops. For veg I run part a/part b at a 1:1 For flower i run it at 2:1. Ill be slowly removing bud site growth that is closer to the bottom. Also will remove all the lower leaves around week 3 or 4,depending on foliage.
Likes
4
Share
Starting to hit preflower! ✌️🏼
Likes
24
Share
Vegetation: To keep temperature and moisture on optimal levels at around 23°C / 65% I'm using two mechanical timers. - 24/7 on: Fans and water pumps (+Ventilation after 3.11.) - Timer 1: Lights and Humidifier 18h on / 6h off - Timer 2 (BROKEN 3.11.): Ventilation 18h (15min on / 15min off) / 6h off NOTES: Everything looks good and the roots have appeared from almost every (11/13) rock-wool cube. From now on I'll mostly water the plants from bottom by adding the wanted amount of nutrient solution on a plate, and then placing the plant on top of for ~15seconds This week I'm also starting to prepare the hydroponic systems (2x NFT-GT90, and 1x EBB-flow I think) and stronger nutrient solution since my plants are becoming ready to be transferred. Spreader-mat is the base of my plants when I have transferred them in to the hydroponic systems. DO NOT place more than one layer of the spreader-mat as it is not meant to be used like that! As you're cutting the mat for NFT's, be aware to have some extra for your peace to reach nutrient solution below the tray. That way you won't get noise from water dropping when systems are turned on. Day 15 (1.11.) Day 16 (2.11.) First watering with a bit stronger nutrient-solution (~ EC 0,6 / pH 5,9) than before, starting with 50ml/plant and watering once from above. Slowly increasing EC to 0,8. I cleaned and assembled 2 out of 3 hydroponic-systems which I'm going to use. I'll do the same also to the last system, but it currently has my plants on top of it so I'm going to do it later. I want to make sure that my plants have built healthy and big enough root system before transplanting to hydroponics. I'm waiting for the rock-wool cubes to be bursting of roots so they won't drown on their first day in hydro. Also, as the plants are bigger before the transplant, I'm able to fill my nutrient-solution tanks full with correct strength nutrient-solution for Mid-Vegetation from the start, therefore no need for that much adjusting later on. Day 17 (3.11.) I noticed my other timer which controls the lights had stopped working... The lights were on when they shouldn't have been, I noticed it an hour after they were supposed to turn off. I think I caught up to it early, but it may have been on for maximum of 2 days straight. No worries there since on vegetation-phase the plants don't necessarily need any sleep (Even though you should avoid quick changes like that!). Roots have appeared from the bottom of every cube and plants are looking pretty healthy. I think they are almost ready for hydroponics. Day 18 (4.11.) Few plants are showing symptoms of nutrient deficiences or some sort of sickness, not certain what exactly. I'll be keeping an eye on it. I'll be transferring in to hydroponic systems in maybe a week, so I don't want to stress my plants more than what's necessary. Increased my solution strength to 0,9 EC with a bit more Cal-Mag than before, and watered the plants for 50-150ml each plant depending on weight and size. I'll be slowly increasing the strength by around 50% during upcoming week. Thanks for tips! Day 19 (5.11.) Day 20 (6.11.) Plants are recovering well from deficiences and I just transferred all of them to hydroponics. I don't have the water pumps on for 24/7 just yet, at this point I water them a couple times a day by keeping the pumps on for somewhere around 15min at a time. Lights are now set to 60% and I also added a tower fan to circulate the air and shake the plants. Day 21 (7.11.) Lights are now set to 70% since the Led's and plants are spreaded wider in the tent than before. Distance to plants stays the same at 75cm.
Likes
6
Share
Hello guys.I m in 4th week with this beauty and she looks fine.I was expecting to get more height this week and I think that she flowers too early.I hope I m wrong 😟
Likes
10
Share
@GreenTHC
Follow
Day 62, harvest day. I will update after the drying and curing process. Wish I could've let them go a little longer but had to harvest slightly early. For my first attempt I'm happy with how the ladies turned out! Nice gassy smell, big sticky dense buds, great colours and 81g altogether wet trimmed. Lost one due to growers error but I've learnt a lot for next run. I will be growing one Auto Chem OG along side one Auto NL x BB from Oasis Genetics. Have a great day and happy toking! 🍃💨
Likes
13
Share
@mr_smooke
Follow
Here we are on day 28. On day 23 i spoted Spider Mites. Next day i been spray leavs whit neem oil, for now SM are gone i hope they will not come back. She coming along nicely😁🤩🤘✌️
Likes
2
Share
@EtnoGrow
Follow
this is the beginning of the 4th week along with the publication of the end of the 3rd week, this is how the fourth week is received, another intensive pruning that has no choice but to do it due to the size of the indoor, which is working great for us and we believe that I will always work like this, I am happy, here then the pruning of its results a little before and after and how it is receiving this fourth week, with the threads I touch a little bit of hair I hope it does not affect much but all in favor of opening the field to all the branch buds alike.WE CHANGE THE MESH FOR A BETTER ONE AND OF THE IDEAL SIZE AND AGAIN WE USE THREADS THAT HELP US VERY WELL, WONDERFULLY