Recommended
Likes
Comments
Share
@Ageddd
Follow
Another cold week, we are having around 2ºC Minimum temperature, and its really cold at night( I mean, for Spain, because if some Nortern people hear this may be laughting at me hahaha) But there is a range of hours when then sun hits directly the plant if its not cloudy, like 6h-8h, this if i dont have to roll out the awning, so the plant is protected when raining. Did not feed the plant until past the middle of the week, because i ovserbed that the flowers were developing slowly as im accostummed, probably because of the low temperatures, so i decided to give her the last feeding and start the flush at the end of this week, because i felt the plant was like at least 2 weeks from proper harvest, and still developing the flowers with white hairs... Im looking for something narcotic with a nice Therpenoid Profile so the later the better in my opinion, but without passing he Ripper Line hahaha :) So last feeding was like a fattening one... Higher Dose of nutrients for the plant, and later added some Micro Vita to the soil, 3grams, and until the end with water and some carbs in 1/2 irrigations ... What amazed me is the strenght of this plant, surviving these really low temperatures, growing a little slowlier, but without problems or buds, amazing plant, as amazing as beautiful, im in love with the colours.. So i hope you enjoyed reading this week Growmmies :) Have a nice week and dont forget to roll one ^^ Good vibezz.
Likes
25
Share
@Hawkbo
Follow
One of my smoothest grows yet, plant was a monster got ppms up to 1340 with the nectar. The final product was 10/10 quality. Yield was decent considering I'm using the nectar.
Likes
1
Share
DNA Autoflower 25 days after germinetion advanced nutrients soil canna plus
Processing
Likes
29
Share
@Hasard
Follow
Hello Guys ! Hope you all are doing well during this beautiful summer. I am very happy to share pics and videos of this new flowering week 😁😎 The ladies are very strong and pretty despite these hot temperatures but I am very confident with the plants. It doesn't smell so much for the moment.
Likes
9
Share
It was a easy strain to grow and was happy with the several watering she needed! I was feeding her every couple of days and she rewarded me with some immense dense buds! I have one more of this strain that might be heavier! I just got done with my 2nd plant and she was a big one! Got 792grams or 27 Ozas Wet weight! My best so far with a 5 plant limit this is the weight of only 2 of the 5 I grew..
Likes
4
Share
@Fatbudz
Follow
week 11 75 days according to the breeder this strain has 7-8 weeks of flowering. with the possible stress that the plant has suffered maybe it has slowed down its growth a little. but since I'm not impatient and I have time is not a problem. I like to let it mature on point so I let it roll for another three weeks. As for the sample I took a week before... it was on a good track. I could already feel some notes and aroma but deep down. very heavy and harsh smoke, to remember that there was no flush or cure, just dry. Now its waiting for the whole plant dry. 🤞🙏
Likes
16
Share
@EXZELENS
Follow
D76 - 14 DECEMBER Well, unfortunately once again I had mold problems. Had to chop her early so I´ll trim and hang her to dry today. D90 - 28 DECEMBER Exactly 2 weeks later and the buds are all nice and dry, everything put to cure now with Boveda 58% humidity control packs. The medium-tiny and very tiny buds weighed at 15.1 grams and the medium to big sized nugs weighed at 33.2 totalizing at 48.3 grams. I´m happy with the result, I thought it would be worse. Let´s see how she goes into curing now! 29 JANUARY Finally, after a proper 30 days cure I´ll be doing the strain review. Thank you so much for taking some time to check my diary out. Special thanks to RQS for the seeds, nutrients, pot and some sick merch. Stay safe and peace everyone ✌️
Likes
6
Share
THURSDAY 7/18: I FIM'd her today. She's growing quickly now.. but looking at her, I'm still not so sure it wasn't really a spinach seed😂 But seriously, I'm thinking that I used too much Mycotrex or Great White while she was still too young or something. Her roots were looking awesome when I transplanted her, but she's got some weird-looking foliage.. FRIDAY: Inspected for pests and repositioned her in a spot that gets another half hour of sunlight per day. I sprayed the area with Ortho again and bought a little air bubbler to aerate water for compost tea.2 SATURDAY: She put on a couple of inches since Thursday. I mixed up a fairly weak batch of Big Bloom and Grow Big plus some Kelp Me Kelp You and douched her with about a half-gallon right as the sun was coming up. I also prepared a foliar feed using Big Bloom and Kelp Me Kelp You and sprayed her well as the sun came up, and again after it was going down. I also started aerating 4 gallons of water today...will add the compost tea tomorrow morning and let it cook for 24 hours. SUNDAY: I foliar fed her and sprinkled little more Silicium Flash on top of the soil of all my plants and mixed about 4 grams of Bactrex into a jug with 3/4 gallon of bottled water and douched all my plants with about 2 pints each. That should really get the beneficial bacteria and fungus kicked into overdrive. I started brewing a 4 gallon batch of compost tea today. Since I don't have any Orgatrex, I am using a little Big Bloom, Kelp Me Kelp You, and Grow Big in the tea in addition to the PK Compost Booster tea from Bi Tabs. I'll add Mycotrex to it about 2 hours before it finishes and thoroughly dowse them all tomorrow morning. MONDAY: She got about a a liter and a half of freshly brewed compost tea and a foliar feeding right after the sun came up. She's a happy camper.👍
Likes
10
Share
Unos días más de Vegetativo y ya pasamos a florar. Antes de pasarla voy a hacer esquejes de todas las plantas para cuidar los fenos más potentes y ricos 🤑 Hoy 10/7 voy a realizar una poda de bajos, un poco de defoliación y sacar los esquejes.
Processing
Likes
16
Share
@VIPgrower
Follow
Just added vid of completed room with fans and the beautiful girls I see Barney’s farms is now following me I love there seeds so far just ordered some more 3 new strains yay can’t wait from Montreal seed bank becasue can’t order from Barney’s farms cause I live in Canada boo but at least can still get them . Also forgot to mention the amount of and effort goes into a good grow room even a budget one like mine but for 9x6x 7 it’s pretty sweet and be proud when I harvest the beauty’s Had a bad experience at the hydro store today bought hat new intake fan got it home hooked it up didn’t work when took it back they said they had to try it I said ok so helped the guy hook it up and nope nothing like I said .then they said they had to wait for a jm electrician hahahahahahahahahaha I said ok I just want a new fan that works after a lot of me getting aggressive which I don’t like to do they finally said ok after all the money I spent there and the one thing like costumer service my ass !!! Anyways they lost a customer today!! However fan is in and runs great all good just venting to no one haha So plants look great have a peek at new vid anyone with ?s or anything comments or suggestions please feel free Water laughing budda today ec 1.6 /795ppm Sprayed big juice just in case vacuumed room accidentally sucked some leaves up in vac oops well they are clean now hahahaha lsd almost ready for watering will give same as laughing budda see how they like if used hydro sparkle this time cal mag b-52 and reg Dutch nutrients feed sorry about they added weeks but more info is good is it not I use tap city water around here let set out over night or couple days and ppm is only 180 to 190 not that bad I think and aerate when add h2o2 let stand at least half hour so no root burn occurs still doing feed water and cal mag/ h2o2 only in the water in the water only cycle definitely next grow looking at flood tables or areoponics or eb and flow constant drip maybe any suggestions ? Two weeks till flower after this Tuesday I think it’s time
Likes
5
Share
@McLovin53
Follow
Nothing new here. Lots of defoliating to finish up the week. Also did a straight water flush to finish up as well.
Likes
567
Share
This grow with the TSW2000, FC4800 and 8x8 Grow Tent has come to an end🤘🤘. I'm so happy with the results mars hydro has done👍. Best lights you can get in my opinion and TONS of other people agree with me on this too👍. I always say mars hydro gets em frosty and their lights DID get em nice and frosty and the buds are so tasty and smell awesome🤘. I trimmed up 6 plants so far. Got 9 more to go. And it seems like I get a 1liter Mason jar per plant and is about 2 ounces per plant. Some are a bit more than 2. Not a huge haul per plant but I'm still very happy with it because the quality is amazing. I will never want to use anything but MARS HYDRO. Extremely satisfied with the entire grow with mars. The weed quality is very good and controlling the heat was simple because they don't get that hot. The lights were very easy to setup and so was the tent. I STONGLY recommend any products from Mars Hydro. You will not be disappointed 👍 Thanks for following my grow and good luck to all my friends and remember to have fun with your grows🤘🤘 rock n roll a joint everyone🤘🥁🎸 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
43
Share
@Coopmc
Follow
Good for sure Might be 7 week flower to finish such great indoor plants!! The shortest FruitWalker I have found with s Short SVF !!
Likes
36
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone :-). This week the baby saw the light :). She came out 2 days ago. It is sprayed into the main area every day so that the humidity stays at the upper level :-). Until the main comes down next week, it does not have to be poured but only sprayed :-). I am very curious how it will develop in the coming week and until then I wish you a lot of fun with the update 😊. Stay healthy 🙏🏻 and let it grow 🍀👍 You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
23
Share
Germinated wiithin 12 hours 2 down 1 more to go! Check out my Cannabis Community, please👇like👇, follow, comment, and subscribe to my YouTube channel👇. ❄️🌱🍻 https://www.youtube.com/@DutchF4rmer Join our discord community for weekly giveaways 👌 (Join the patreon for help advice and mentoring) https://www.patreon.com/DutchFarmer (Discord Server) https://discord.gg/VMu6rH4a7V IG https://www.instagram.com/dutchfarmer1/ It will be appreciated! ❤️ Happy Growing 🌱🌱🌱
Likes
1
Share
In this week we want to top dressing with organic fertilizer and take microbe in soil or make compost tea use every 7-10 days and use CO2 at 1,600 ppm and boost PK with single ingredient cut loss about Nitrogen and plan to use protein hydrolysate for soil
Likes
126
Share
@nonick123
Follow
Día 47 (03/03) Las señoras siguen su imparable Stretch. Solo mirarlas y disfrutar 😍😍😍🎉🎉🎉 Día 48 (04/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 1,5 ml/l + Early Flower 0,75 ml/l de Gen1:11 TDS 960 PPMs - pH 6,26 Día 49 (05/03) Se empiezan a formar los erizos! 😍😍😍 Día 51 (07/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 1,5 ml/l + Early Flower 0,75 ml/l de Gen1:11 TDS 950 PPMs - pH 6,37 Día 52 (08/03) Purple Lemonade FF y Wedding Cheesecake FF están mostrando una pequeña deficiencia de CalMag... Siguiendo las recomendaciones de Marco de GenOneEleven, aplico foliarmente 1 ml/l de Solid Green Día 53 (09/03) Parece que el stretch se frena un poco... 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae 🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1