Likes
Comments
Share
@Dsant
Follow
D24 - 10/02/2025 Last week was really good, none of the girls showed any signs of toxicity after the full strength feed, which is good. I’m already seeing signs of pre-flowering on some of the girls, next week for sure we enter flower mode. Applied some LST to the girls and some defoliation. Fan leaves were taking a lot of space, now internal nodes should have more light to use. Not going too crazy on this though. Unfortunately snapped a branch of Northern Lights #1 while applying the LST, must take extra care next time. Still haven’t changed the reservoir, should do that later this week. — D27 - 13/02/2025 Changed the reservoir and mixed nutrients for pre-flower. I’ve been adjusting the LST, but other than that there’s not much of an update. Girls are looking really great and growth is exploding. PPFD is around ~500 on canopy level. — D28 - 14/02/2025 Did another defoliation session. Went a bit more heavy this time. Now we let them recover for a few days.
Likes
1
Share
Likes
574
Share
@TOTEM
Follow
Hello everybody! This week will be the hardest one. I’ll have to work a lot inside the room, and even on GD to document all the changes. Last week I topped for the last time (in reality this happened the first day of this week), and finally stopped with high stress training. From now on, our attention will fall totally on ScrOG. Day 43: Topped the 4 colas at the extremities. Red blood came out from them (see the photos). Amazing! Sorry for the bad quality, but I got just the phone with me when I did the job. When I took the second photo (a few hours later), the plant had already sucked up all the lymph. You can still see the red blood by the way. Day 44: Set the timer to start with 12/12 from midnight of day 45. Day 45: SO MANY THINGS HAPPENED TODAY. Flowering started, baby! 🤩 Today, in the evening, I worked for about 4 hours to prepare the ScrOG environment. - Improved the LST before placing the grid. - Took some photos. - Removed the humidifier. - Since my LED panel has half of the blue lights broken (this happened three weeks ago), resulting in 100W less of total potency, I added 3 new lights pointing where the panel is broken (2x 36W led bulbs and 1x 30W COB led light). I uploaded a photo and a video to better understand what I’m talking about. I even tried changing the broken LED driver, but it didn’t work, so now I’ll have to wait until the end of this cycle to send it to maintenance. - Put 20gr of BatMagno (which is bat guano), 10gr of “Farina di Neem” (Neem Flour), and 50gr of Alghe, all of them over the soil. I’ll write something about these fertilizers at the end of the comment. - 4.5L of tap water (corrected to PH6.5), which gave zero runoff. Haha, she’s drinking like a camel. - Placed the grid. - Took a few photos. - Little defoliation. - Took all the other photos. - There we go! I preferred not to add the bloom fertilizer now because I’m a little worried about overfertilizing this baby. During veg, she showed me she doesn’t like nutrients, so I’m just listening to her requests. I’ll add the bloom one as soon as she seems hungry again. By the way she’s just 20cm tall (I’m so proud of this result) and the grid is located a few centimeters above her. Let’s see if I switched to 12/12 at the right time: I heard this strain usually stretches for about 6 weeks!!! 😱😱 Let’s talk about the ferts I placed on the surface of the soil. - BatGuano: it’s a mixture of organic fertilizers of natural origin and suitable to produce a high amount of organic nitrogen and phosphorus that can be assimilated at 100%. It’s a natural slow-release fertilizer for flowering: the raw materials used (guano, dried borlanda with ammonium salts, kieserite of natural origin, flagpole, meat meal, bone meal and dried poultry) are the result of a careful selection which ensures a low salinity and a gradual transfer of the elements. The phosphorus content in BatMagno (being organic) does not undergo insolubilization. - Alghe: they are a portentose substrate activator made of a mixture of algae of the species Ascophillum, Fucales and Laminariales, obtained through a process of dehydration and grinding without the use of any chemical substance. They can be used during the preparation of the soil, and increase and strengthen the formation of the root system, mobilize the nutrients in the soil, reinvigorate the plants, protecting them from adverse weather conditions, help plants to overcome stress conditions and improve the quantity and quality of production. All of this is possible thanks to the presence of betaine, cytokinins, vitamins, auxins and alginates polysaccharides. - Farina di Neem (Neem Flour): it’s a vegetable product based on Neem seeds, obtained from the extraction of Neem Oil through a process of cold-squizzing out, which increases crops, improving both growth and flowering, as well as strengthening the roots of the plants. The Neem Flour is mixed with nitrogen fertilizers, that slow down the conversion and leaching of nitrogen. Repeated interventions improve the endogenous resistance of plants to pathogens, creating an unsuitable environment for the development of insects and cryptogams. Due to the presence of important trace elements for plant life, it prevents imbalances and nutritional disorders. It also protects plants from Nematodes, ants, insects and soil larvae. Let’s say Alghe is the most smelly product. My room now smells like seaweed! I need to figure out how to give her water now that the grid is on. I think I’ll plug a 2m pipe at the end of my watering can. That’s the most easy and cheap way to fix this problem. I just need to find the right size of the pipe. I’ll show you my solution next week.
Likes
6
Share
@Spazmagi
Follow
11/10 - Over this last week the ladies have consumed a significant amount of nutrients in addition to the water they drank. After 4-5 days ppms measured 580 and pH 6.7. Added full strength nutes to top off (not half-strength like normal). This brought the res to 715ppm and 6.2pH. Removed a couple older fan leaves that weren't getting good light. Plant is maintaining 6" height with wire ScrOG. She has started to show her bud sites and I expect a fairly healthy stretch due to her ~90+ day timeline. This should allow plenty of tucking under the ScrOG to allow light to the inner bud-sites and increase overall yield vs previous grows. As always, feel free to hit me up with any comments or questions about my grow. Happy Growing!
Likes
46
Share
@Canna96
Follow
Super Impressed with Dutch Passion Genetics....This lady is an absolute beast, as soon as I open the tent the smell of blueberry smacks me in the face....Super Excited to smoke this pig, and super impressed with my first grow by Dutch Passion...I will absolutely be trying this strain again, as well as some other Pheno's from DP.
Likes
47
Share
These ladies are looking damn fine and of the two they are what seems identical - 👍 Sweet Seeds for gen stability. Both were topped 7 days ago and the inside lower nodes all removed. I’m only looking for A,B grade colas on both. Stay safe, keep the ✌️
Likes
105
Share
@Hipichic
Follow
My experience overall can be best described as an interesting enlightening process. Since it was my first time growing it was definitely a learning experience. From the height being as tall as it was to the high winds in the area making it difficult to keep them from toppling when the buds were reaching full maturity. Thinking it would have benefited from more topping than just the once. The terps that this strain has are exquisite!! I am going to miss walking by them towering over me and just breathing in their berry cream aroma, taking in the sweetness like I had just had some dessert. Really enjoyed this strain and hope to grow it again sometime. Thanks for checking out my first grow 🌼💚✌️
Likes
2
Share
Hey So I had to harvest a little earlier now because I'm going on vacation, so I'm done with everything 2 weeks before :) It was quite easy to grow it has a very strong smell and generally a strong effect it tastes sweet/sour/woody It is sticky and the buds are quite heavy I harvested 146.5g dry weight from a plant :))
Likes
4
Share
El viernes 21 regamos foliarmente con Delta 9 preparándolas para floracion
Likes
4
Share
@RzUdoo
Follow
Finally the Outdoor season is here.... Because of the regulations here up north, We , the growers have to be very careful, its very risky. But if you are wise and like being out in the wild a bit off, the nordic countries is full of greenspace. The tricky part is to find god spots as near to home as possible. Around Stockholm there is over 1000 islands. Many without any inhabitants.... I have chosen a couple, This diary is from one of the Islands,,,, A rocky steep and very uninviting place.... Close to everything... but almost never visited. It alsa have a history from Viking age that Estonian Pirates were slaughtered there by the Vikings in the year 700.... And since that day,,, their ghosts haunt the island, and never rest. Not afraid of this things.... But i am glad it keep more people away. This diary is about the 3 Mimosas. 3 out of 19 different cultivars i got on the island, I chosed these ones because they seam to thrive best so far. Started a bit early,,, and some genetics didnt manage the cold start to well. But Mimosa Auto was one of them who did. All planted in wild soil, mixed with a bit plantsoil with 5% Kow-shit(just a little). The rest i leave to mother-Nature. The Island Spirit Guardian, The Sea-Eagle Will watch it over. ThanX
Likes
3
Share
Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.
Likes
9
Share
Think I’m going to have to harvest maybe a little early as I will not be around to water the plant.🤷‍♂️🤷‍♂️ bit to sure if it’s ready or not. What do you think is it to early and how early ?
Likes
20
Share
@Dr_Rook
Follow
Ahí siguen las piñas en su camino..🍍🛣️ Ya la tercera semana y veo que van creciendo muy lento, entiendo que es por la falta de vatios, porque la condiciones están siendo buena y comida les he dado muy poca. A ver cómo transcurren en esta semana, porque ya tengo ganas de pasarla a florecer 😅
Likes
75
Share
@Cheezy
Follow
At the start of week 3 she wasn't quite as big as what I would have hoped for but it looks like she is staring to turn it up a notch, for now I will just continue watering when dry. Started LST on day 20. Sorry about lack of photos on day 21.
Likes
1
Share
Planted seeds June 12th at 12:26am. While germinating the seeds and during the night time I will be keeping them all in a 2x2x5 grow tent under three 2 foot T5 bulbs to maintain a 24 hour light cycle. I am also using a seedling heat mat to raise the root zone temperature, along with creating a humid environment. Three seeds are visible from peat pellets June 14th at 8am. Last seed is visible through medium at 5pm. All plants sprouted with cotyledon leaves June 15th at 11am. Transplanted all the plants into 5 gallon fabric pots with pre-amended medium at June 17th. Three plants have first leaves forming, while one seems to be a little behind. Gave a light watering, along with heavy misting on the soil. Last plants first leaves started forming June 18 at 7pm. All plants are progressing well with minimal stretching. All 4 plants have their 2nd set of leaves starting to grow June 20th at 12pm. Put outside right at 12pm, then brought them inside at 9:30pm. Put outside June 21st at 1pm Watered them lightly twice with several hour gap in between. All leaves are praying up and all growth is progressing. Put inside at 11pm.
Likes
9
Share
@russrahl
Follow
These girls are exploding like the bomb seeds they are! Always a treat to grow any Bomb seeds in my experiences. I have grown Both Atomic and Widow bomb before and great seeds/genetics and amazing top shelf buds on massive plants. They are really blowing up now there roots are in the water and all 4 have been topped in prep for LST and there screens. I also installed my DIY reservoir cooler and wrapped my buckets in reflective insulation stuff to keep heat out and keep water cool. Will post some results when I test it more...