Week five of my first cannabonsai/mother project. This young lady has been having nothing but tap water for the last few weeks. I am going to start feeding her as soon as she shows the first signs of deficiency. After all the training on day 20, then the root reveal on day 26. I left her five full days to recover before messing any more. Then I took all her fan leaves off and adjusted the LST. I need to train here more over the coming days. Day 31 - Photographed and took a video. P.S. Follow me on X! @unorthadoxdude

•Todo vá marchando bien,las he dado 3 riegos con Pk booster compost tea. -A razón de 25g( una cucharada y media) x 1,5 L . *PH: sin medir* *Riego si,riego no,añado 7,5 ml de Orgatrex,al oxigenado de nutrientes* -Añadí 1,5g de Bactrex( una cuharadita y media ×1,5L. 🗣️ -Las daré un penultimo riego con esta mezcla,y luego varios riegos con agua sola; que vayan continuando/terminando de nutrirse.

Day 46 for this pretty lady. She’s so big and bushy and full. I’m just in awe of how she turned out. Very very excited for her she’s full of life and vigor. Nothing I’ve thrown at her has seemed to matter. Idk what Russian means but hey who cares when they look like this. Hello beautiful. Can’t wait to see her full and bulk out.

Hey there, I will say goodbye, fastbuds dont appreciate my work and this reports cost a lot of time maybe i come back. But i get 6 seeds for my 58 diaries waited 6 month to get the next seeds only to get no answer and no seed. My plan was big but i had to stop in the middle of the beginning so see ya and happy growing!

PRIMERA SEMANA DE FLORACIÓN, VAMOS PASANDO LAS RAMAS ENTRE LA MALLA, Y AÑADIMOS EL BUD IGNITOR A NUESTRO RIEGO

I've turned the light up to 35000 lux. Up'd the bloom to 1.5ml/l. There still stretching and could do with more room but there doing well 😎

Last week I fought some yellowing of the leaves. Did some small adjustments on PH to keep it in the 5.6 range. Seemed to stop it from progressing. For Week 3 Veg I topped the plants. I plan to flip the lights at the end of week 3 and move into flower. Day 15 I continued to have yellowing leaves even though I had everything looking right. (Added Pic). I decided to look into the PH to see if I was having issues with it. I have a meter in the water 100% of the time taking a reading every 1 sec. It all looked right. But I decided to Calibrate it in 4,7,10 solutions. Found out that my meter was off. So new to the check list is to calibrate the meter before each grow. I was thinking my PH was High, when in reality it was low. put in some PH up to get it back to 5.5 and over the last 16 hours things look pretty good. Leaves look darker. Day 17 Things are looking good. Leaves are getting darker and new growth coming in. Day 18 Turned room temp down to 73F from 76F. Fearing it is warming up my res tank too much. Day 19 Starting to get yellowing again. checked everything and can't find a good reason for it. Did notice some cloudiness in my res tank. Added 2 ML/Gal of peroxide. have Hydroguard on the way to help. I'll be adding more fans this weekend. I have light air movement currently. Also found a few spider mites and sprayed Greencleaner to all plants. Current environment settings: Room Temp 72.74 F Room Humidity 63.63% (After spraying, Trending down). Room CO2 589PPM Tank PH 5.70 Tank PPM (500 Scale) 953 Tank Temp 74.05 F Day 20 Recalibrated my EC probe just to be sure it was also accurate. wasn't off by much. Dialed back my flooding to every 5 hours to encourage Rooting. <-- Strong roots = strong Plants Sprayed for mites

Hey everyone 🤗 The stretch is clearly visible this week. They all look very healthy, and it's fun to watch them explode every week 😎 My watering interval is as follows: Light on: 3 min on / 50 min off Light off: 2 min on / 1 h off. This week I will defoliate everything downstairs. I look forward to seeing you start blooming next week until then all the best and let it grow 😎 Edit : in the last pictures everything was defoliated 😎

For this grow I've used, For the growth 1 Mars Hydro TS1000 (150 W) 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 11l geotextile pot 20 Hours On, 4 hours off light For the soil I've used plagron light mix + batmix in the down For the blooming 1 Mars Hydro FC300 (300W)@75% 2 fan 15w Extractor + Filter 150mm 1 Mammoth lite 60 box 1 timer 11l pot 20/04 After harvest, I've put the stuff in a room with 1 fan 15w Thanks for all my friends! And again thanks @Fast_Buds , and Mars Hydro, @Coco_Pan2022 ❤️❤️❤️

This week has been wild. I had to cut the sides of the greenhouse as the plants had it bursting at the seams. These girls are all flowering beautifully and starting to frost up. Happy Growing.

I think they are starting to hermie

This week was a real breeze! She's gaining a ton of weight on the bud sites and she's really growing nicely! She's starting to bud around the flowering sites and really finishing nicely. The formation of bracks and the formation of the buds is my favorite part because that's when you get to see somewhat of the final picture and the time the flower is most colorful! Now the second best part is harvesting the flower for smoking which will be occuring soon! The smell on these girls is very invigorating!! She's putting out a smell of a Lemon Cherry Now n Later! You can smell the Lemon and Cherry right away when you open up the tent! I can't believe how big she's got and how beautiful they are coming along! I have to say that this is one of my favorites to grow and my favorite smelling strain! I also love the way the flowers are stacking on the colas!!! The frost on top of the cola leaves is insane! During the day I drop the humidity down to 45-50% and then at night I raise the humidity up to 60-65% which helps a ton with flower promotion during the flowering stage! Also, I raise the temperature during the day to 80° and at night I lower the temperature to 55°-60° which helps mimic the autumn temperatures that aids a ton in flower production in the flowering stage!!! I'll be stopping the two Lemon Cherry Cookies Auto's from receiving any synthetic nutrients and flushing them now since harvest will be within the next two weeks or so! I'm doing that because they stop taking nutrients in and start to self canabulize as a normal (ending) part of plant life. Then I'll give the two ladies plain pH balanced H20 for the next 2 weeks to flush any and all nutrients out of them. Then three days of darkness. Finally I'll chop them down to hang in my harvesting closet for 7-14 days with a dehumidifier on at 65% humidity. Then I'll place the flower into the trimmer and then into the grove bags for the last step in harvesting! The grove bags will keep the flower at 58-62% humidity. They also help keep the flower fresh longer, the Terpenes fresh, the Terpenes flavors, and from becoming moldy or dried out! I've used both these and the mason jars with boveda humidity packs but to me the grove bags are a must and a go to fail safe!!! All you do is hang your buds upside down at 60/60 or 65/60 for 7-10 days or until the braches snap and make that noise. Thanks and as always stay safe, stay high, and stay blessed!

Plant is growing good, put scrog a bit higher and waiting for its flowering, it has showed it's sex and hopefuly starts flowering at least after a week. HPS lamp is doing its job perfectly, can't wait to switch it to yelow Sodium.

Took well too last weeks flush. 💧 Did some defoliating to allow light deeper into the canopy. ☀️ Putting back on recommended strength nutes.💉

Here we are at the end of my plant's wonderful eleventh week of flowering, another week full of exciting developments and new discoveries. The constant and unstoppable growth of the plant has come to an end, showing a beauty and vitality that are a true spectacle for the eyes. 😎 The abundant layer of resin that has formed is a clear sign of the health and well-being of the plant, once again confirming the benefits of the premium nutrients used throughout the entire growth cycle. TrollMaster's "TENT-X" environmental control system continues to prove its worth, precisely maintaining optimal temperature and humidity levels to promote vigorous plant growth. The combination of advanced and precision technologies ensures that plants can thrive in a controlled and conducive environment😎 I am thrilled to share with you the latest video showing the temperature, humidity and VPD trends of this last week of flowering, providing further demonstration of the extraordinary performance of the TrollMaster control system and its synergy with the other elements of the grow room. With each week that passes, the anticipation for the new discoveries and challenges that await us continues to grow. With the constant support of Plagron nutrients, trust in the TrollMaster control system and the excellence of MEDIC GROW LED lighting, I am sure that I am always ready to face any challenge! Thank you again for being by my side in this extraordinary adventure, dedicated to exploring the wonders of plant cultivation. Together we continue to look to the future with confidence and enthusiastically anticipate the successes that each new week holds for us. 💪👽🌱✨ REVIEW TENT-X: I was pleasantly surprised by the effectiveness and functionality of the TROL MASTER! This device is simply amazing, as it has allowed me to monitor the environments I use it in accurately and efficiently. One of the most impressive features of this device is its ability to operate LED lights easily and intuitively. Thanks to its user-friendly interface, I could easily customize the lighting of my rooms according to my tastes and different situations. I particularly appreciated the possibility of programming the sunrise/sunset simulation, thus creating a more natural situation. But that's not all: the device goes further and manages to keep me constantly informed about the humidity and temperature of the surrounding environment. This feature has proven to be very useful, especially in times when I am not present. I was able to set humidity limits, so that the device would immediately alert me if the levels exceeded the desired threshold. This allowed me to intervene promptly and avoid excessive oscillations. The accuracy of the temperature measurements was another welcome surprise. The device is equipped with a high precision sensor that allows me to constantly monitor the temperature of the rooms. Here too I was able to set temperature limits, allowing me to be notified immediately if they were exceeded. Overall, I was really satisfied. The TENT-X exceeded all my expectations. Its ease of use, precision of measurements and possibility of customization make it an indispensable tool for those seeking to monitor and optimize environmental conditions.

Que pasa familia, empezamos la primera semana de floración de estas Original de GrowBarato. Y es que no veáis de un momento a otro se quedaron sin espacio, vaya estirón esta última semana. Están bastante sanas , tienen muy buen color, se practicó una limpia de bajos y ramas que no eran necesarias porque no llegaran a la luz. Hasta ahora todo bien y ya superamos esta primera semana. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

Harvest Day 100 Strong Tropical Aroma

I've realised I've got my weeks mixed up somewhere! This was 7 days after the last update.

Hi! Just harvest both plants, left them with all their leaves and whole main branch intact. Just removed the light panels and hanged them on the same tent. I’m using some cardboard to cover the recently watered soil, blumats are still running to support the life on the soil through the next amendment and new plants that will come shortly (after the drying period finishes, about 2 weeks for a slow drying process). That’s it :)