Got the last trimming may need second trellis

Week 5 for Black Lebanon by SSSC, Have to point out shes my best growing plant to date id say, just wont stop pushing in size😂 Her lower branches caught up with the tops so i have also topped those, I will be transplanting her to a big 250L pot outdoors today & stretching her out as much as i can. Cant wait to see how she reacts to a bigger pot with unlimited room for root growth. I was going to keep her indoors for longer but shes going from full pot with water to fully dry in just under 2 days, her roots are DRINKINGGG. 😬 Im sure she will be getting another topping to her top branches my next week sometime again.

This auto ghost OG loves her little home. She's doing well. Had some calcium deficiency last week since I ran out of calmag. I was hesitant to use organic calmag, but that was all I could find locally. It is doing the trick though. pH has held stable with no adjustments and the leaf color is looking great. No water change this week since since everyone seems to be happy with the nutrient levels. She popped her first pistils on day 25 so I am hoping she will enter flower soon. Only issue at this point is she is a lot bigger than I ever thought she would get. I will probably have to figure out a way to get them further away from each other. And yes....this plant is 28 days old in a 16 oz cup. At no time have any roots grown out of the cup. Happy growing everyone!

she is starting to outgrow the tent

Expecting a awesome top shelf smoke from this girl, smell is mid way, a lot less than other strains, so it make a good option to stealth, but not the best. Superb strain, will update on the effects after dry and fully cured, high is supposed to be mild and functional, this is my first medical strain with high CBD, super curious. ---WET WEIGHT--- 421G ---DRY WEIGHT--- 95G just flowers000 ---UPDATE 2 . After harvest--- -A -Jaring After drying till the stems almost snap, in a rack, I separed the flowers, weighted and jared for cure. -B-Vape report. Vaped with a Davinci IQ, about .5 from the uncurred buds, from 350f to 430f max temp. Since the begging of the session you feel this is a special strain, taste is 5/5 vapor production is insane 5/5, and the effect as discribed by RQS, a stress killer that allows you to funcione normally, think it as a mild relaxant, is what i was looking for so super satisfyed! As you increase the vaping temps you feel the effects stronger, basically is a good body sensation and head tranquility, no paranoia, no confusion, no psychoactive stone. The side effects i feel is the classic dry mouth, not too strong though. -C-Joint smoke. Nice and smooth it hits with a mild sensation, very relaxing, no couch lock, mental trip or anything, i’m certain is similar to canna-tonic some how, very enjoyable, sweet taste tones of citrus earthy and woody. -D-Bong hit. Not a fan of bongs, i feel vaping gives a better overall experience, though for the sake of the diary, i did a bong hit to check, filled a full bowl and hitted mutiple times, the smoke is smooth, no harshness, though is a bit more intense than smoking a joint. ---UPDATE 3 . Final— Well guys, this concludes my diary, with this final update. After two weeks cure, i feel is already cured for the most part, one more week and all the cruise part will be done, after that it continues but slowly. It was fun to grow, and top shelf smoke. Note that is not a recreative smoke, is functional and enjoyable, i feel that if you have a super strong strain you can dilute in to this one and have a more controlled high. Smoking, vaping in multiple temperatures and i could still function, work, speak on the phone and think clear. Looking for a Stress Killer, high in CBD, that will melt your stress and concerns so you can go on with your duties and enjoy a nice smoke, give this strain a go, and let me know so i can follow your diary and know your opinion. Cheers everyone and thanks for those who contributed to the diary in any manner, or passed by. Happy growing always. 00

Already, this is going to be the last week, next week im switching to 12/12 lets see what this marshydro TS1000 can do, i want to see if i get the same results as my LEC, if thats the case its a real winner as its half of electricity costs, and electricity starts to get expensive as every indoor grower knows 😁😝 The blue sunset goes good, she's looking quite recovered from last weeks topping

Hey fellow growers week 9 update of my critical purple and pineapple auto grow. Well today all 4 plants are 63 total days old. Critical purple #2 is now in week 6 of 🌸 the other 3 are in forth week of 🌸. This will most likely be critical purple #2's last update as she will be harvested this week hopefully! No big changes this week from last besides Pineapple auto #2 is still not happy and critical purple #1 is thickening up nicely! Well here's what I did to the ladies this week... 10/30/21 Watered all plants Ph 6.2 178 Ppm 1ml ph down Solution temp 73.2°F 11/3/21 Critical purple#1 & Pineapple auto #1 2ml micro 3ml bloom Ph 6.31 420 Ppm Solution temp 70.0°f Critical purple #2 still flushing! 5ml flora kleen Ph 6.24 185 Ppm Solution temp 74.6 Pineapple auto #2 2ml micro 3ml bloom Ph 6.5 430 Ppm Solution temp 74°f Here's my link for discounts on merchandise from viparspectra: https://www.viparspectra.com/?aff=Wackytabacky420&utm_source=affiliate Coupon code: Wackytabacky420 Well guys it's been a crazy week so I'm gonna wrap this up till next week. Best of luck and Happy Growing!😎🌱💚💪💪

2 weeks to flower in main tent. Red Hot May have had a little nute burn. Lighting is at 628 on Par meter. 78deg avg. Malt was accidentally super cropped. Healing from splitting her branch. Oozecake aka Judy is my prize now. She fought through some mold 1st week. Transplanted her with only 1 node. Then her 2nd transplant to 1 gallon she was stunted for a week.

it's big I must say that it has an imposing structure although it is still low and its stem is very big and mighty like the leaves no problem to highlight here everything is ok ... I forgot .... the bloom has already started a few days ...

Started flowering.they are ready and healthy. Gave them just 6ph water and next watering tomorrow is gonna be huge dose of N as first 2 weeks they grow monsterous. I keep em low and bend alot.lots of shoots begin to form as i topped again about 10 days ago

I shouldn't have started the lst training on her because she started flower very fast and early so she ended uo being very small, which I hate because It has a very skunk citric aroma very powerful, I had a little harvest of 10g counting the little flowers which I used to make cannabutter to make some edibles.I wish I could have a huge harvest of this amazing strain, looking forward to grow her again. 🤞💚🌱💎

Week is good so far not much to stay just seeing what becomes of this clone # happy growing

Grow is looking very bushy. Raised the light up about 6". This is a 60 dsy strain. So we have about 4 weeks left in the flower process. Interested in what the roots will look like.

We continue ... start of the week.... The plant continues to grow bigger ... it has remained low compared to my normal standards, perhaps because I had given it too much water however many branches full of flowers ..... now we start with the end of fertilization and then start the flush but we evaluate next week O.T. :someone will ask but MiniMe where is ????? caught !!

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

The plants would have been growing well if I were there to figure out what was wrong with them but I was on the first week of a 2 week vacation so my gf didn't know what to do with them and I could only try to give tips from afar. I assumed they would all die.

2 day of flipping to flower 2 gmo seed and 2 blueberry clones 1 jealous clone and 3 grap pie

🌱 Weekly Report: Week 16 Flower – Gorilla Melon Highlights 🌱 Room Dynamics and Challenges This week marked a pivotal phase as we approached harvest. The decision to harvest Gorilla Melon in two stages allowed us to navigate a potential mold issue effectively. The mold was confined to select areas of dense colas, which were promptly removed to protect the rest of the plant. This experience reinforces the importance of keen observation, especially in the final weeks. Environmental Parameters • Temperature: 26°C • RH: 53.2% • VPD: 1.57 kPa • CO₂ Levels: 1067 ppm • PPFD: 690 µmol/m²/s • Solution Stats: pH 6.67 | TDS 695 ppm | Temp 18.3°C The ThinkGrow LEDs and TrolMaster systems shone during this critical period, maintaining precise control over the environment. The addition of deep red and UV light at 100%, with whites at 50%, seemed to amplify trichome production, resulting in a frosty finish across the garden. Highlights of the Week • Fading Colors: The garden displayed a stunning spectrum of fading hues, signaling the end of the cycle. Gorilla Melon’s red highlights and frost stood out beautifully. • Defoliation Success: The earlier defoliation efforts paid off, minimizing mold spread and allowing light to penetrate deep into the canopy. • Trichome Inspection: The frost level across Gorilla Melon was nothing short of mesmerizing, a testament to her genetics and the controlled environment. Gratitude and Community A heartfelt thank you to the community for your support and engagement. The sponsors—ThinkGrow LED, TrolMaster, Aptus Holland, and ProMix Soil—made this run possible. It’s been a pleasure to share this journey with you all. What’s Next? With Gorilla Melon harvested, the spotlight now shifts to the other girls in the garden. Stay tuned for their individual harvest reports, smoke reviews, and more as we wrap up this epic series! Discount Codes so you can save big on your next check out 💚💚💚 CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Fast Buds - DOGDOCT 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚