Week 2.I rearranged a few lights in my grow room to get rid of unnecessary lighting and I also moved my auto flowers to their own separate environment. Only about three more weeks left on the Auto’s and I’ll be done for now. I plan on using a harvest right freeze dryer to cure

Blätter werden immer gelber 🤯 Bekomme es nicht in den Griff !! Der nächste Grow auf jeden Fall mit ec und ph Überwachung und strickt nach Düngerplan!! Temperaturen gehen auf 26-29 grad 24/0 Licht eventuell zu viel /: Nährstoffe 🤯 Die Einzelnen Zweige hab ich mit bodenanker und Schnur auseinander gezogen damit sie nicht zu dicht sind und sich gegenseitig das Licht wegnehmen ..

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

It's Day 35 Week 05 Of Flower For My 02 Kombucha Cream By atlasseed . And For My Snow White and SpliffStrawberry By Spliff Seeds Amsterdam . Today was Hair Cut Day For All 4 Lady's. Happy Growing Growmies 🤘🏻

The Deep Purple #1 is doing the best in the garden. The only one that is doing great. The other Deep purple is stunted like the rest of them. We had heavy rain for like a week straight, and they did not like it. The FB CBD#1 is curling leaves and all weird. It is either to much nitrogen or to much water from the rain. Hopefully they will kick it into gear here soon. Better weather is coming so I hope they take off. I sprayed them with some FAA, FPJ, and OHN this week.

Was such a pleasant harvest from start to finish, no issues at all. A tip for next time would be to have the SCRoG lower as I couldn’t really tuck any node sights this time round, smells absofuckinglutely amazing from 3RD week bloom onwards!

So I don't know how to help her. She has big stress becouse of temperature...

AUTO MOON ROCK / DIVINE SEEDS Week #8 OVERALL WEEK #3 FLOWER This week she looking good buds are taking shape and getting frosty no issues at all this week!! Stay Growing!! Thank you 😊 for stopping by and taking a look it's much appreciated!! Thank you DIVINE SEEDS!! AUTO MOON ROCK / DIVINE SEEDS

04 - 07 May 2023 - Germination Week 08 - 14 May 2023 - Veg week 1 15 - 21 May 2023 - Veg week 2 22 - 28 May 2023 - Veg week 3 29 - 04 June 2023 - Veg week 4 05 - 11 June 2023 - Veg week 5 12 - 18 June 2023 - Flower weel 1

Week 4 - 01/22 to 01/28 2021 Pictures from Days 25 + 26 TRANSPLANTED! 1.) I think the Purple Lemonade might have flipped into preflower already like the other Red Poison and Dark Devil 2.) Think the Purple Lemonade has Tobacco Mosaic Disease? No worries for me dur only thing I can see with the streaking/twisted new growth but the Purple Lemonade is doing fine otherwise 😈 More and more reasons to go back to a photoperiod grow after this for more control/really test out the new lights 🙌 Ended up more 50/50 ratio of Destiny Organic's Dark Matter Living Soil + ProMixHP since I had to make the Destiny last. Apparently they went out of business just after I decided it was my favourite/new soil :( Would rather stay away from Ocean Floor since I haven't had the best experiences with it (bugs/rust fungus etc) Feel free to drop some recommendations other than Fox Farms below 👍 Moved the Purple over to it's final 5gal on Jan 26 and started light LST + watering from the bottom of the tray to coax the roots down as opposed to a top pour. Still giving them hourly sprays of basic water foliar and the light water/hydrogen peroxide spray mixed in here and there for piece of mind/extra cleaning from the soil contact during transplant. Looks like bits of purple/red flecks are starting to creep in to the stems so hopefully keeping my window open at night to drop the temperatures will pull some great colours in my tent for the first time 😻👹😈 I raised the @ViparSpectraLED P1500 another eight inches after transplant and started basic LST. I really wanted to get these four under a ScrOG but if 3/4 are already flipping and the LSD is still runty I might have to wait it out again. I have the @MarsHydroLED TSL2000 set up and ready to go once the girls settle into their new pots. Have the new surge protector/heavy duty power cords/power tool grade timers as mentioned in Week 3. Some of it shown in the pictures. Threw some videos in this week as well with some Queen's Radio GaGa, Beastie Boys' Brass Monkey, and a little hint of Arkells ....COME TO LIGHT on the short @ViparSpectraLED ..GET IT.. 😓 -- Thanks for checking in! Throw down a like and/or follow so I can return the favour 🙌 Check out my Diary of the Year 2020 Entry for my Original Auto Sour Diesel: https://growdiaries.woodroom.tel/diaries/54258-fastbuds-original-auto-sour-diesel-grow-journal-by-glazedgrow IG: @GlazedGrow CannaBuzz: @GlazedGrow

10/2 They made it to their forever pots. Next Saturday we'll be hitting 2 months from sprout and as a whole its been a pleasure to grow these plants. They all are a very healthy green and seem to be happy. Temperatures in the region may have unexpectedly slowed them down (I grow in a basement) because temps have plummeted from around 78 with the lights on to as low as 71! I don't think they like it either. Growth has slowed with it. Never fear, space heater is here. Everything thing needs to be dialed in for the next few weeks because I want explosive growth over the next 21 days. Going to try a SST somewhere in there. Parsing through all this bro science isn't easy but it sure is fun to experiment. It allegedly gives you good root growth and provides crucial enzymes. Almost sounds too good to be true but I'm going to see how it goes regardless. I heard you can use I wide variety of seeds but alpha alpha is the only one I have on hand. Wish me luck. As for the plants: Moby= beast. I'd be a fool not to attempt to clone her. Vigorous grower and responds well to training. Not a demanding eater either, at least so far. Loving this freebie from NASC. Highly recommend them if you're in the northeast US looking for a local seed bank. GZ 1 = steady. Probably the biggest back slide if you want to call it that. Spotted some yellowing on lower leaves but they are shaded by this ones thick canopy. May not even be an issue but we keep an eye on it. Probably the biggest critic of the lowering temperatures because she's slowed down in the past 2 days. Gz2= trooper. She had a rougher upbringing and she's got a far different shape than the other two because of it. But with a little work I'm sure soon both GZ will be indistinguishable from one another. Banana daddy= forgot to take pics of her. Man have I been growing autoflowers all wrong. I may have fed this plant once. Though it should be noted that the soil I put her in was amended with alpha alpha, fish bone meal, and guano. She seems to really enjoy it so far. Not a single yellow leaf. Droopy at times though which is odd. Also some tacoing on new growth that ends up correcting itself as the leaf gets bigger. Double odd. Next time I do an auto run I'm definitely doing much less in terms of feeding and maintenance. Loving your plants too much can be deadly. Starting to figure them out though so I'm happy I did at least one. I'll post in a few days when I water my photos again.

Week 10 – Ready for the final stretch Most of the pistils have turned brown, with only a few white hairs remaining – a clear sign that harvest is approaching fast. The buds have bulked up nicely, becoming denser and stickier, covered in a frosty layer of trichomes. The aroma has intensified, leaning towards a sweet, fruity profile, likely enhanced by the Bud Candy. The foliage looks healthy, and I performed a light defoliation to improve airflow. At the beginning of the week, the plant received its final feeding: a mix of Green Sensation and Bud Candy in 2 liters of distilled water. That was followed by a dose of Flawless Finish. From now on, only pH-adjusted water will be used until harvest.

Después de una mudanza, volví a armar el hydro, pero con piezas nuevas que conseguí dentro de todo barato. Aún así le falta mucho para lo que me gustaría armar con más espacio y un poco más de presupuesto. Pero estoy urgido de poner las plantas porque ya enraizaron. Las plantas son 10 esquejes de Green Tiger del banco BSF. Tienen entre 5 y 8cm. de altura. Parece una planta muy frondosa, dado que la madre me permitió cortar un total de 24 esquejes en 48 días, creciendo en hidroponia DWC. Los pequeños van a crecer por unos 15/20 días y luego pasarán a floración. Mañana veré que tal anduvo el trasplante. Hoy ya por lo menos está andando. Ya lo iré poniendo más cómodo.

On day 1 week 2 flower the Gals are really stretching now, hope I have enough room 😂They seem to be taking the flower nutes well even without a transition phase 😀. On day 3 the gals have stretched so much they are within 6 in of my light hoping The stretch will slow down soon yikes 😱. I defoliated the lower and upper canopy to bring in more light and air flow. On day 6 the stretch seems to be slowing down. I increased my light intensity from 75% to 100% to see if I can halt anymore stretching. I also bent my highest colas down as they were touching the grow light 😂. On day 7 flower clusters are forming and the stretch has slowed. I will continue to bend over the tallest colas and do my best to manage the canopy without too much loss of yield. It looks like some of my colas might get light stressed/burnt. There is not much else I can do except learn from my mistakes...next time I would flip the plants earlier and give them stronger light intensity before flowering stretch. The top leaves are canoeing so I reduced light intensity back to 75% to see if they improve. I got my first clog in my blumat systems main line... I will be switching to liquid based fertilizers for the next run as I believe my fertilizer caused the clog. I released the clog by using a pipette filled with water. I took the pipette and squeezed liquid through the main line exiting my reservoir. Then the lines were running smooth 😂

Did some defoliation to get ready to flower. Took off a ton of huge fan leaves. Don’t really think I removed enough, honestly. Removed a couple lower, small branches and chopped the top 4 nodes of my tallest plant. It was getting too tall for the tent, and is now the same height as the others. Put the cuttings in some rapid rooters with rooting hormone. Will hopefully have 6 clones total!

Die Blue Dream hat sich zu einem wahren Monster entwickelt. Der Sativa Einschlag drückt richtig durch, so langsam hört der Stretch aber auf. Die Blütenansätze und Stigman sind richtig dick und breit, was ich zuvor bei noch keiner Sorte so stark wahrgenommen habe. Die Interniodenabstände verkürzen sich nach oben nun wieder etwas. Der Geruch ist bisher eher erdig, würzig, hazeig. Ich bin sehr gespannt wie die weitere Entwicklung verläuft.